- 1 Unlocking it
- 2 Activating it
- 3 Using the console
- 4 Features
Developer Mode is a bundle of features created by Bungie West to help them develop Oni: a console line for entering scripting commands, manual camera controls, and various debugging features. It was traditionally activated with the cheat code thedayismine, but see "Unlocking it" and "Activating it" below before trying the code.
Despite being hinted at by a crate texture (right) and appearing on a leaked list of cheat codes during beta testing, this cheat code did not work upon Oni's release, and it was long believed that Developer Mode had been cut from retail versions of Oni. However, Dev Mode is actually present in all available versions of Oni. It just needed to be unlocked, as the community learned back in 2006.
Below you will find download links, unlocking instructions, and finally an overview of the Developer Mode's features. For Dev Mode features lurking in the PS2 version of Oni, first discovered in 2017, see Oni (PlayStation 2).
...by downloading a patch
Windows: You can install the Daodan DLL to unlock Developer Mode; note that the Anniversary Edition installs the Daodan DLL automatically.
Mac: The Intel build of Oni already has Dev Mode unlocked; note that the Anniversary Edition installs the Intel build automatically.
...by doing it yourself
You may want to read this if your Windows version of Oni is not covered by the above DLL (e.g. if you have an odd language version) or if you are on a Mac that cannot run the Intel build (if you're using an old PowerPC Mac, note that a Dev Mode-enabled version of The Omni Group's "Mac OS X port" is HERE).
First, get a good hex editor. Ideally, it should allow you to search for sequences containing joker characters (that is, wildcards or bit masks). One such editor for Windows is XVI32. On Macs, CI Hex Viewer is free, powerful, and can perform the search you need, but Hex Fiend has a better comparison function so you can check your work afterward (open the original and edited binaries and choose File > Compare "Oni" and "Oni").
Cheat code lookup tables
- Cheat overview
- There are 22 cheat events in every version of Oni, indexed from 0 to 21 (or 0x00 to 0x15 in hexadecimal). See table on right; the cheat code omitted by Bungie, thedayismine, is in bold. The four italicized cheat codes are "one-way" cheats that do not have on/off states, which affects the table described below.
- The order is the same in every version, so we can refer to the cheats by their ID, or by the cheat code used to activate them.
- Cheat lookup table
- When you type characters in the Pause screen, the text you enter is progressively compared with all the strings in the cheat table.
- When and if there is a match, the corresponding confirmation message is displayed for enablement/confirmation, or for disablement if the cheat was already on, and the corresponding cheat event takes effect when the Pause screen is closed.
- In full, each row of the cheat table consists of:
- a pointer to the cheat code string
- a pointer to the "enabled"/recognition message
- a pointer to the "disabled" message (if any)
- the internal ID of the cheat event to launch
There is a row for every cheat, and they appear by order of increasing ID. In most Oni builds, the developer mode cheat (ID 0x0B) is simply skipped over; reservoirdogs (0x0C) comes right after superammo (0x0A).
- Data size on different platforms
- In the Windows retail/demo builds and The Omni Group's PPC Mac builds, every row of the lookup table takes up 16 bytes. The 3 pointers and the ID are 4-byte data words (little-endian in Windows, big-endian on PPC Macs). If a cheat has no "disabled" message, the row's third pointer is null.
- In Bungie's original Mac build (the retail version of the application), the pointers and the ID are 2-byte words (Big Endian). Regular rows take up 8 bytes, but for one-way cheats with no "disabled" message, weird stuff happens to the third pointer and to the ID, and the row takes up 10 bytes; here, the ID can be found in what would be the first byte of the ID field instead of the second, and the remaining 3 bytes are garbage. An additional garbage byte is added between consecutive one-way cheats (0x06 and 0x07).
Let's kill "killmequick"
In the Windows retail, Windows demo and Omni Group PPC builds, there's extra space at the end of the lookup table and where the cheat codes/messages are stored, so one can add thedayismine as an extra cheat. In Bungie's retail Mac builds, the data is packed tighter (and the text strings are stored together with their size), so the only easy way is to replace an existing cheat. Since replacing an existing cheat is the only solution that works on all platforms, the following mini-tutorial will explain how to bind the Developer Mode cheat event to the Ultra Mode cheat code killmequick (since hardly anyone uses that cheat).
Finding the lookup table
Open the executable (or the data fork of the retail Mac build), after backing it up of course…. We shall look for the last three elements of the table, corresponding to fistsoflegend, killmequick and carousel.
- In the Windows retail and demo builds, look for 13 00 00 00 ## ## ## ## ## ## ## ## ## ## ## ## 14 00 00 00 ## ## ## ## ## ## ## ## ## ## ## ## 15 00 00 00
- In the Omni Group build, look for 00 00 00 13 ## ## ## ## ## ## ## ## ## ## ## ## 00 00 00 14 ## ## ## ## ## ## ## ## ## ## ## ## 00 00 00 15 (sample pic)
- In the retail Mac build, look for 00 13 ## ## ## ## ## ## 00 14 ## ## ## ## ## ## 00 15 (sample pic)
where the ## are joker characters (wildcard bytes). Once you've found that data (make sure it occurs only once in the file), replace the 14 with a 0B.
Developer Mode will now be enabled/disabled every time you type killmequick at the Pause screen; you'll get "Ultra Mode Enabled" and "Ultra Mode Disabled" as confirmation messages.
Even once Developer Mode is unlocked, it must be activated in-game through a cheat code. Cheats are normally disabled until you finish the full version of the game, but cheats are enabled all the time when the Daodan DLL is installed in Windows or when using the Mac Intel build.
Enter the cheat code
Enter the Pause screen (default key F1) and look for a confirmation message after typing the Developer Mode cheat thedayismine (or killmequick if you followed the DIY tutorial above). You can also just type x when the Daodan DLL or Mac Intel build is being used.
Using the console
By default, Oni auto-binds the "console" toggle to the key to the left of the numeric row. On U.S. QWERTY keyboards, this is the key with a grave accent, `, in the lowercase position and a tilde, ~, in the uppercase position. It is usually called the "tilde key" by users even though it's really the "grave accent key".
On non-U.S. keyboards, that key may not be recognized. Just add a line like "bind leftalt to console" to key_config.txt in your Oni folder and you'll be able to open the console with that key. In some cases, this bound key will not close the console; however, pressing the grave accent key, oddly enough, may work. Or you can press the appropriate key for your layout:
Danish QWERTY: The ½ key to the left of the numeric row.
German QWERTZ: The circumflex accent key, ^. In Windows, if playing Oni in windowed mode, you should use "rightalt" as your alternative console binding because "leftalt" activates the window's menu, stealing Oni's controls.
Console output glitch
When Developer Mode is active, Oni prints debug messages about in-game events along the bottom-left of the screen. Past messages scroll up the screen and fade. In some situations, messages don't fade (e.g. if character debugging is enabled or you are currently using the console line).
The easiest way to check whether that output works at all is to press F8: the character class change is acknowledged with a console message.
If you don't see anything, that means console output is broken in your version of Oni. If you're using the Windows version of Oni and you applied Ian's patch (the old WinXP patch, no longer offered because it is superseded by the Daodan DLL), that may be what disabled console output. In Windows demo Oni, both console output and console input are invisible (i.e. you can enter script commands, but you're "blindfolded").
Many of the features listed below no longer work as intended, either due to changes made to the code before shipping Oni or due to the absence in retail Oni of developer resources that the features were intended to call upon, such as level0_Tools. Nevertheless, some of these features are helpful for modders, most notably the camera controls and dev console.
Below are Oni's hardcoded mappings for Developer Mode functions. The Alt key (Option key on Macs) can be used in place of Ctrl. Ctrl is called "Strg" on German keyboards.
The "U.S. QWERTY" column gives the standard hotkeys (the keys intended by the American developers to be pressed). In the "German QWERTZ" and "French AZERTY" columns, the hotkeys differing from U.S. QWERTY are shown. If you have another type of keyboard that you would like to have incorporated into the table, feel free to add a column (or ask for it on the talk page).
If a hotkey's functionality has been restored in Windows using the Daodan DLL, it will be checked off here. Stuff that doesn't work has been grouped at the end of the table.
(1) This dev feature does not fully function in Windows, so the only non-occluding quads that disappear are console screens.
(2) This dev feature does not fully function in Windows, so the non-sound-occluding quads remain visible. However, the second aspect of this feature, which marks furniture with a red texture to indicate that it is partially sound-occluding, still works.
(3) On Macs, Draw Every Frame Mode speeds up the game almost to the extent of Fast Mode, but with glitchy animations.
(4) Please see talk page section "Insert key on Macs".
(5) Wouldn't Ctrl+Y and Ctrl+Z conflict with "Performance display"?
(6) "Animation freezing" works on the main character and means two things:
- a) The character's position and pose remain exactly the same as they were at the time of freezing, along with collision shapes (spheres and body parts) and other stuff.
- b) The actual character, unless "pinned" with chr_pin_character=1, will keep moving with the same velocity as at the time of freezing.
- For regular (grounded) animations, the vertical velocity is zero and the horizontal velocity is determined by the animation frame that was playing at the time of freezing.
- If airborne (jumping or falling) the current airborne velocity (both vertical and horizontal) at the time of freezing is maintained.
- Wall collision is disabled, as well as gravity acceleration and the "air" timer (so you can't die from falling for too long while frozen).
- Floor collision still works, as well as the "off" timer that starts when you step off a ledge, and the downward velocity that is applied then (see ONCC for details on this downward velocity).
- If one sets chr_pin_character=1, then animation debugging works exactly as intended: there is no drifting, and one can conveniently advance through the frames of the current animation.
- If one does not set chr_pin_character=1, then the frame-freezing functionality does not allow one to study animations, and instead provides a powerful (and risky) teleporting gimmick.
Note that the camera controls have default mappings, given below, but unlike the developer hotkeys, they are custom-bindable. In fact, on Macs, the default numpad bindings need to be customized or they won't work at all. See note HERE about how to bind these keys and fix the Mac numpad controls. Also, the definitions of panning left and right are reversed, as NumPad4 will turn the camera to the left, but its action is called "man_cam_pan_right", and vice versa for NumPad6....
After detaching the camera with Enter and flying it away from Konoko, the End key teleports Konoko to the camera position and attaches the camera to her position again. If you turn off collision with "chr_nocollision 0 1" before teleporting, Konoko will not fall out of the air when teleported to the camera position (just don't jump with collision off...).
(Almost) anything you write in scripts you can enter at runtime with the console. The only thing you can't do is register new variables and functions.
You can call existing functions, check on the values of existing variables. "Existing" means either built-in ones, or part of the original level logic, or part of your own scripts for the given level.
If a function/variable was succesfully registered by Oni during level load, you will be able to refer to them from the console.
You will even be able to browse the registered variables/functions with the Tab key, while typing at the console. Tab autocompletes the command being typed, then cycles through all available commands in (hex)alphabetical order (A...Z come before a...z). Shift+Tab lets you go back.
Previous commands can be navigated with up and down arrows. You can't insert/delete text in the middle of a command; you have to use Backspace.
The only keys that have an effect while the console is active are: Escape, Enter, Backspace, (Shift+)Tab, ASCII character keys and the arrow keys.
If you press an illegal key during console input (such as F1), the input display will freeze; hit Tab a few times to fix.
Obviously, if Oni is experiencing graphical issues and you have no console output, runtime scripting can be a bit frustrating. Even more so if console input is invisible -- you're in for some blindfolded scripting then. Still, there are a few commands which you can type in as equivalents to regular cheats:
- chr_nocollision 0 1 and chr_nocollision 0 0 enable/disable no-clipping. When in no-clipping mode, you can't fall down; thus, jumping makes you flail in midair, and eventually you die (so be careful about that)
- give_powerup shield gives you a force shield (which you can't have with fatloot)
- dump_docs prints all the registered commands/variables to a file in your Oni folder (so you know just what you can type)