OBD:Oni2AS: Difference between revisions

From OniGalore
Jump to navigation Jump to search
m (OK, section editing is officially buggy as hell)
 
(15 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[Category:Modding information]]
The [[Oni2AS|Oni 2 dev disc]] from Angel Studios contains:
The Oni2 dev disc from Angel Studios contains:
*the main ELF executable '''SCPS_123.45'''
*the main ELF executable '''SCPS_123.45'''
*a plain-text configuration file '''SYSTEM.CNF'''
*a plain-text configuration file '''SYSTEM.CNF'''
*a '''SYSTEM''' folder containing fifteen ELF binaries ('''*.IRX''') and a file called '''IOPRP255.IMG'''
*a '''SYSTEM''' folder containing fifteen ELF binaries ('''*.IRX''') and a file called '''IOPRP255.IMG'''
*the three "binary data" files '''BANKS.DAT''', '''RB.DAT''' and '''STREAMS.DAT'''
*the three "binary data" files '''BANKS.DAT''', '''RB.DAT''' and '''STREAMS.DAT'''
:"RB" possibly stands for "Rebirth", one of Oni2's working (sub)titles.
:"DAT" probably does ''not'' stand for "Death and Taxes", another of Oni2's working (sub)titles. ^_^
==DAT file format (file table)==
==DAT file format (file table)==
The common format of the three "binary data" files is as follows (illustrated on the example of '''RB.DAT''').
The common format of the three "binary data" files is as follows (illustrated on the example of '''RB.DAT''').
Line 50: Line 52:
|}
|}


The file table format is apparently a PS2 standard, and there are free tools like [http://www.watto.org/game_extractor.html Game Extractor (basic version)] that can display the folder structure and file sizes, and extract uncompressed files. However, while Game Extractor correctly identifies the compressed and uncompressed file sizes, it apparently does not know what the compression algorithm is (at least in the free version the compressed files are extracted in their compressed form and are thus unusable). Only very short files are packed without compression, for example minor shader or animation scripts.
The file table format is apparently a PS2 standard, and there are free tools like [http://www.watto.org/game_extractor.html Game Extractor (basic version)] that can display the folder structure and file sizes, and extract uncompressed files. However, while Game Extractor correctly identifies the compressed and uncompressed file sizes, it apparently does not know what the compression algorithm is (at least in the free version, the compressed files are extracted as-is, and are thus unusable). Only very short files are packed without compression (mostly trivial-looking stub files of little interest).


After some forum lurking, it becomes clear that the compression algorithm is ZIP, or rather "deflate", in its most common implementation (open-source [https://www.zlib.net/ ZLIB] library). However, the compressed files have no ZIP header, so the decompressor/compressor must use the right default settings for this to work. The correct setup is as follows:
After some forum lurking, it becomes clear that the compression algorithm is ZIP, or rather "deflate", in its most common implementation (open-source [https://www.zlib.net/ ZLIB] library). However, the compressed files have no ZIP header, so the decompressor/compressor must use the right default settings for this to work. The correct setup is as follows:
Line 76: Line 78:


==Commonplace file formats==
==Commonplace file formats==
Some of the files in '''RB.DAT''' are either in plain text or in otherwise widely known formats that can be opened by third-party programs. Here is the list of such commonplace formats used in Oni2.
Some of the files in '''RB.DAT''' are either in plain text or in otherwise widely known formats that can be opened by third-party programs. Here is the list of such commonplace formats used in Oni 2.
*'''*.txt''' : [[wp:Text_file|Text file]]s. Some in Windows format (CR+LF at EOL), some in Unix format (only LF at EOL)
*'''*.txt''' : [[wp:Text_file|Text file]]s. Some in Windows format (CR+LF at EOL), some in Unix format (only LF at EOL)
*'''*.mb''' : binary file used by Maya 3D program (work-in-progress models of some characters and props)
*'''*.mb''' : Binary file used by Maya 3D program (work-in-progress models of some characters and props)
*'''*.wav''' : [[wp:WAV]]. a common format for the uncompressed storage of sounds (through pulse-code modulation)
*'''*.mb.swatches''' : Maya swatches, whatever they are. There are also '''*.mel''' files (plain text)
*'''*.tga''' : [[wp:Truevision_TGA]]. a versatile texture format that supports RLE compression, MIP map storage, indexed as well as RGB color schemes, transparency (and therefore is widely used in games).
*'''*.wav''' : [[wp:WAV|WAV]]. A common format for the uncompressed storage of sounds (through pulse-code modulation)
*'''*.xml''' : [[wp:XML]].
*'''*.tga''' : [[wp:Truevision_TGA|Targa]]. A versatile texture format that supports RLE compression, MIP map storage, indexed as well as RGB color schemes, and transparency (and therefore is widely used in games).
*'''*.cue''' : [[wp:Cue_sheet_(computing)]]. Occurs only once, as '''rb.cue''' at the root of '''RB.DAT'''
*'''*.xml''' : [[wp:XML|XML]].
*'''*.m2v''' : [[wp:MPEG-2]]. Video files. Occur in the form of '''movies/angel.m2v''' and '''movies/rockstarlogo.m2v'''
*'''*.cue''' : [[wp:Cue_sheet_(computing)|Cue sheet]]. Occurs only once, as '''rb.cue''' at the root of '''RB.DAT'''
*...
*'''*.m2v''' : [[wp:MPEG-2|MPEG-2]]. Video files. Occur in the form of '''movies/angel.m2v''' and '''movies/rockstarlogo.m2v'''
*'''*.doc''' : Microsoft Word file
*'''*.xls''' : Microsoft Excel file
*'''*.psd''' : Adobe Photoshop file
*'''*.tif''' : [[wp:TIFF|TIFF]] image file
*'''*.lnk''' : Microsoft shortcut


==Plain text file formats==
==Plain text file formats==
Apart from XML files (and some TXT files; mostly debug logs), Oni2 has many custom plain-text files, listed below.
Apart from XML files (and some TXT and '''*.log''' files; mostly debug logs), Oni 2 has many custom plain-text files, listed below.


'''Save files -''' occurs only in the form of '''sample.oni2save''' at the root of '''RB.DAT'''
'''Save files -''' occurs only in the form of '''sample.oni2save''' at the root of '''RB.DAT'''
Line 93: Line 100:
'''Template files -''' occurs only in the form of '''template/rb.template''' and a couple of '''layout.template''' files (see '''Layout files''' below)
'''Template files -''' occurs only in the form of '''template/rb.template''' and a couple of '''layout.template''' files (see '''Layout files''' below)


'''Layout files -''' files that specify the layout of a level. They're called names like '''layout.et''' (entities), '''layout.graphs''', '''layout.lights''', '''layout.paths'''
'''Graph files -''' files ending in '''.graph''', found in '''layout/*/'''
 
'''Layout files -''' files that specify the layout of a level. They're called names like '''layout.actors''', '''layout.et''' (entities), '''layout.graphs''', '''layout.groups''', '''layout.lights''', '''layout.paths''', '''layout.fog''', '''layout.atktab''' (attack table), '''layout.template''', '''layout.campack''' (also '''layout.campacknew'''), '''layout.bnds''' (bounds)
 
'''Environment settings -''' occurs only in the form of '''default.environment''' files in various '''layout/*/''' folders
 
'''"rb" files -''' core settings of some sort found '''in Settings/''': '''rb.ammo''', '''rb.expl''' (explosions), '''rb.formations''', '''rb.fx''' (effects), '''rb.gamedata''', '''rb.gt''', '''rb.inventory''', '''rb.patterns''', '''rb.proj''' (projectiles), and '''rb.weap''' (weapons). Also '''Audio/rb.audiopackages''' and '''fx/rb.fxe''', as well as the aforementioned '''template/rb.template'''. ("rb" possibly stands for "Rebirth", one of Oni2's working (sub)titles.)
 
'''UI files -''' two files ending in '''.ui''', found in '''Settings/''': '''rbfrontend.ui''' and '''rbgame.ui'''
 
'''Tuning files -''' two files ending in '''.tune''', found in '''Settings/''': '''pad.tune''' and '''pad_before_massive_tuning.tune'''


'''Script files -''' files ending in '''.oni''', rather similar to [[BSL]]. Can be compiled into binary '''*.onc''' files.
'''Script files -''' files ending in '''.oni''', rather similar to [[BSL]]. Can be compiled into binary '''*.onc''' files.


'''Model files -''' files ending in '''.mod''' or '''.xmod'''. Version 1 format is plain-text, version 2 is binary (see below for both).
'''Model files -''' files ending in '''.mod''' (or '''.mod.bak''' or '''.mod.old''') or '''.xmod'''. Version 1 format is plain-text, version 2 is binary (see below for both).


'''Pathfinding files -''' files ending in '''.room''', '''.bsp''' or '''.mesh''' (collection of interconnected pathfinding meshes)
'''Pathfinding files -''' files ending in '''.room''' and '''.bsp''', found in '''Level/*/'''
 
'''Mesh files -''' files ending in '''.mesh''', found in '''Level/*/''' (pathfinding) or '''Entity/*/''' (explosions and gun flares)


'''Fighting state machines -''' files ending in '''.fsm''', found in '''Statemachine/'''
'''Fighting state machines -''' files ending in '''.fsm''', found in '''Statemachine/'''
Line 105: Line 124:
'''Attack patterns -''' files ending in '''.atk''', found in '''Statemachine/''' and '''layout/fightai_grapple/statemachine_backup/'''
'''Attack patterns -''' files ending in '''.atk''', found in '''Statemachine/''' and '''layout/fightai_grapple/statemachine_backup/'''


...
'''Formation files -''' files ending in '''.frm''', found in '''Settings/''', apparently something to do with the GUI page layout.
 
'''HUD setting files -''' occurs only in the form of '''Settings/HUD_Settings.hud'''
 
'''Control mapping files -''' occurs only in the form of '''Settings/control.map'''
 
'''Particle files -''' files ending in '''.ptx''', found in '''Settings/'''
 
'''Shader files -''' files ending in '''.shader''', used as an intermediate between models and their textures.
 
'''"Neat" files -''' two files ending in '''.neat''' in '''Entity/kno/''' (apparently improved '''.shader''' files)
 
'''Attack FX tables -''' files ending in '''.attackfxtable''', found in '''fx/'''
 
'''Effect lists etc -''' files ending in '''.fxl''' and '''.fxm''', found in '''fx/'''
 
'''Jump files -''' files ending in '''.jump''', found in '''entity.tune/animpkg/nav/'''
 
'''Locomotion files -''' files ending in '''.loco''', found in '''entity.tune/animpkg/nav/''', and in the respective folders of some character entities.
 
'''Blocking files -''' files ending in '''.blk''', found in '''entity.tune/*/''', and in the respective folders of some character entities.
 
'''Reaction files -''' files ending in '''.rct''', found in '''entity.tune/*/'''
 
'''Animation packages -''' files ending in '''.apkg''' (and '''.apkg.txt'''), found in '''entity.tune/animpkg/'''. Also, template file '''entity.tune/animpkg/nav/nav.tpkg'''
 
'''Animation collections -''' files ending in '''.anims''' or '''.Anims''', found in '''entity.tune/*/''', and in the respective folders of some animated entities.
 
'''Attack data files -''' files ending in '''.atdt''' (or '''.atdt.bak'''), found in '''entity.tune/*/''', and in the respective folders of some character entities.
 
'''Attack collections -''' files ending in '''.attacks''', found in '''entity.tune/*/''', and in the respective folders of some character entities.
 
'''Attachment files -''' occurs only in the form of '''entity.tune/erc/erc.attach'''
 
'''Fighter data -''' occurs only in the form of '''entity.tune/kno/kno.ft'''
 
'''Weapon data -''' files ending in '''.weap''', found in '''entity.tune/*/'''. Possibly related to '''Settings/rb.weap'''
 
'''Sound library -''' files ending in '''.sndlib''', found in '''entity.tune/*/'''
 
'''BFG files -''' files ending in '''.bfg''', found in '''layout/*/''' and '''Entity/*/'''
 
'''MMB files -''' files ending in '''.mmb''', found in '''layout/*/'''
 
'''Entity type -''' files ending in '''.type''', found in '''Entity/*/''' (mostly '''entity.type''' or '''Entity.type''')
 
'''Bounds and physics -''' files ending in '''.bnd''' (mostly '''Bound.bnd''' or '''Bound#.bnd''') and '''.phys''' (either '''Bound.phys''' or '''Bound#.phys'''), found in '''Entity/*/'''
 
'''Shape files -''' files ending in '''.sha''', found in '''Entity/*/'''
 
'''Skeleton files -''' files ending in '''.skel''', found in '''Entity/*/''' for rigged/animated models
 
'''Edge files -''' files ending in '''.em''', found in '''Entity/*/''' (for character collision?)
 
'''Gait files -''' files ending in '''.gait''' (or '''.gait.bak'''), found in '''Entity/*/''' for characters (a gait is a "manner of walking")
 
'''TC files -''' files ending in '''.tc''', found in '''Entity/*/''' (apparently for animated textures; "texture collection"?)
 
'''Playback files -''' files ending in '''.play''', found in '''Entity/jae/''' and '''Entity/krk/'''
 
'''"lot" files -''' files ending in '''.lot''', found in '''Entity/''' (lists of '''*.mb''' files). Also '''Entity/back.lot.withTemplates'''
 
'''"ini" files -''' occurs only in the form of '''Entity/button.ini'''
 
'''"mel" files -''' apparently Maya project definition (plain text)
 
'''"attr" and "geom" -''' only occur as '''Entity/proxy/exportTMP/exportTmp/set_temp1.attr''' and '''Entity/proxy/exportTMP/exportTmp/static.geom'''
 
Some plain-text files do not have an "extension". Usually those are either empty files, or dummy files of an identifiable type. Examples are '''tim_atk_FCH1_rht_pch_uprcutreadme''' (a plain-text "readme" file), '''trashpath''' and '''guardpos''' (unused stubs of '''.oni'''-like scripts), '''ack''' (some kind of skeleton data for Konoko) and '''pants'''


==STM file format (sound stream)==
==STM file format (sound stream)==
There are some regular WAV files in '''Audio/banks/wav/ ''' [and some audio streams encoded in the ''*.bd''' files, not yet reverse engineered at the time of writing [[User:Geyser|geyser]] ([[User talk:Geyser|talk]]) 01:40, 6 February 2018 (CET) ], but there is also a WAV-like format called STM (unrelated to the MIDI-like STM file mentioned on Wikipedia).
There are some regular WAV files in '''Audio/banks/wav/ ''' [and some audio streams encoded in the ''*.bd''' files, not yet reverse engineered at the time of writing [[User:Geyser|geyser]] ([[User talk:Geyser|talk]]) 01:40, 6 February 2018 (CET) ], but there is also a WAV-like format called STM (unrelated to the MIDI-like STM file mentioned on Wikipedia).


...
To be documented later. The WAV files obtained after conversion can be found [http://geyser.oni2.net/STM2WAV.ZIP HERE]


==TEX file format (texture)==
==TEX file format (texture)==
A texture format similar to Oni's [[TXMP]].
A texture format similar to Oni's [[TXMP]].


...
To be documented later. The TGA images obtained after conversion can be found [http://geyser.oni2.net/TEX2TGA.ZIP HERE]
 
Some of the textures are temporary or alternative copies, and so their filenames don't end in '''.tex''' but '''.tex.old''' or '''.tex.highRes'''


==MOD file format (plain text)==
==MOD file format (plain text)==
Most of Oni2's models are in a plain text format identified as "version: 1.10".
Most of Oni 2's models are in a plain text format identified as "version: 1.10".


...
...
Line 126: Line 215:


...
...
==SNE file format (binary)==
...
==HD and BD file format (binary)==
...


==ANIM file format==
==ANIM file format==
All of the '''.anim''' files in Oni2 are uncompressed, and store translation, rotation and scaling values as regular IEEE floats. The meaning of each float (whether it is a translation, a rotation or a scaling, what its axis is, and which bone it corresponds to) is described in the '''.skel''' file (skeleton) of the mesh: the transforms are parsed in the same order as they appear in the '''.skel''' file. The link between the skeleton and the animation is established at the level of the "entity", and is not detailed here.
For rotations, most commonly the full triplet of Euler angles is stored, and for translations the full position vector. For a few UI elements the pose is limited to a rotation around 1 axis (indicated in the '''.skel''' file), and therefore a single float is enough to describe the pose. Sometimes a rotation axis is present in the '''.skel''' but locked at a fixed value - in that case the keyable values are reduced to the remaining rotation axes. Scaling triplets are present, e.g., for the "Buco" robots.
There is no time compression. The complete pose (i.e., all the keyable translations/rotations/scalings listed in the '''.skel''') is stored for each consecutive frame in the animation (i.e., if the transformation for a bone does not change at all for a certain time range, or during the whole animation, it is stored for each frame anyway). The frame rate is 30 fps.
Apart from the floats (translations and rotations for each pose/frame), each '''.anim''' file has a header, which announces, among other things, the number of transforms per frame and the number of frames. The header can be of the following three types:
{{table}}
{{OBDth}}
{{OBDtr| 0x00 | 4CC        | FF0000 | 41 4E 49 31 | "ANI1" | animation type "ANI1" (example file: kno_atk_comb_bak_bakkckCH.anim) }}
{{OBDtr| 0x04 | bitset    | FFFF00 | 00 00 00 80 | 0, 0, 0, 128 | flags; the following bits occur in the original files (values in hex):
:0x'''01''' 00 00 00 - unknown
:0x00 00 00 '''80''' - has detailed (per-frame) root motion data
}}
{{OBDtr| 0x08 | int32    | 00FF00 | 21 00 00 00 | 33  | number of frames }}
{{OBDtr| 0x0C | int32    | 00FFFF | 78 00 00 00 | 120 | number of transforms per frame (must be consistent with the number of keyable values in the .skel file). In this example the skeleton is kno.skel, which has 39 bones; all bones have an XYZ rotation triplet (Euler angles), and the root bone also has an XYZ translation triplet; hence there will be 120 values in total (plus the detailed root motion).
}}
{{OBDtr| 0x10 | float    | 00FF00 | BD 97 4D BD | -0.0502  | total root motion along X (matches the cumulated X values of the detailed root motion track, if any) }}
{{OBDtr| 0x14 | float    | 00FF00 | 00 00 00 00 | 0.0      | total root motion along Y (matches the cumulated Y values of the detailed root motion track, if any) }}
{{OBDtr| 0x18 | float    | 00FF00 | 63 A7 03 BF | -0.514  | total root motion along Z (matches the cumulated Z values of the detailed root motion track, if any) }}
|}
----
{{table}}
{{OBDth}}
{{OBDtr| 0x00 | 4CC        | FF0000 | 61 6E 69 00 | "ani"+null | animation type "ani" (example file: kno_atk_BLH1_lft_punch.anim) }}
{{OBDtr| 0x04 | bitset    | FFFF00 | 01 00 00 00 | 1, 0, 0, 0 | flag(s); the following bits occur in the original files (values in hex):
:0x'''01''' 00 00 00 - unknown
}}
{{OBDtr| 0x08 | int32    | 00FF00 | 51 00 00 00 | 81 | number of frames }}
{{OBDtr| 0x0C | int32    | 00FFFF | A2 00 00 00 | 162 | number of transforms per frame (must be consistent with the number of keyable values in the .skel file). In this example the skeleton is the (missing) xkno.skel, which has 53 bones; all bones have an XYZ rotation triplet (Euler angles), and the root bone also has an XYZ translation triplet; hence there will be 162 values in total.
}}
{{OBDtr| 0x10 | float    | 00FF00 | 7D 18 7D BD | -0.0618 | total root motion along X (matches the keyed motion of the root bone) }}
{{OBDtr| 0x14 | float    | 00FF00 | 00 00 00 00 | 0.0    | total root motion along Y (matches the keyed motion of the root bone) }}
{{OBDtr| 0x18 | float    | 00FF00 | 00 00 00 00 | 0.0    | total root motion along Z (matches the keyed motion of the root bone) }}
{{OBDtr| 0x1C | byte      | 00FF00 | 01          | 1      | flag(s); the following bits occur in the original files  (values in hex):
:0x'''01''' 00 00 00 - unknown
}}
|}
----
{{table}}
{{OBDth}}
{{OBDtr| 0x00 | 4CC      | FF0000 | 00 00 00 00 | null chars | "short" animation type (example file: kno_BR2H1_HighPunchBackRight.anim) }}
{{OBDtr| 0x04 | int32    | 00FF00 | 51 00 00 00 | 81 | number of frames }}
{{OBDtr| 0x08 | int32    | 00FFFF | A2 00 00 00 | 162 | number of transforms per frame (must be consistent with the number of keyable values in the .skel file). In this example the skeleton is the (missing) xkno.skel, which has 53 bones; all bones have an XYZ rotation triplet (Euler angles), and the root bone also has an XYZ translation triplet; hence there will be 162 values in total.
}}
{{OBDtr| 0x0C | float    | 00FF00 | AA 9D 00 3E | 0.126  | unknown }}
{{OBDtr| 0x10 | byte      | FFFF00 | 01          | 1      | flag(s); the following bits occur in the original files  (values in hex):
:0x'''01''' 00 00 00 - unknown
}}
|}
Immediately after the header begin the keyed values (floats), grouped by frame: first all the keyed values for frame 0, then for frame 1, etc.


...
For each frame, the keyed values correspond to the ones listed in the '''.skel''' and occur in the same order. The typical order is:
:X translation of "root"; Y translation of "root"; Z translation of "root"
:X rotation of "root"; Y rotation of "root"; Z rotation of "root"
:X rotation of 1st child of "root", typically "spine_01"; Y rotation of "spine_01"; Z rotation of "spine_01"
::... XYZ rotation for all the children of "spine_01", in hierarchical order (same as in the '''.skel''')
:X rotation of 2nd child of "root", typically "pelvis"; Y rotation of "pelvis"; Z rotation of "pelvis"
::... XYZ rotation for all the children of "pelvis", in hierarchical order (same as in the '''.skel''')
:Detailed XYZ root motion (if any; can only occur in ANI1 type animation). Stored as single-frame increments.
 
Rotations are stored as XZY Euler angles (first rotation is around bone's Y, then around the new Z, and finally around the latest X). Angle values are in radians.
 
[[Category:Modding information]]
 
[[Category:Modding information]]

Latest revision as of 19:26, 23 January 2020

The Oni 2 dev disc from Angel Studios contains:

  • the main ELF executable SCPS_123.45
  • a plain-text configuration file SYSTEM.CNF
  • a SYSTEM folder containing fifteen ELF binaries (*.IRX) and a file called IOPRP255.IMG
  • the three "binary data" files BANKS.DAT, RB.DAT and STREAMS.DAT
"RB" possibly stands for "Rebirth", one of Oni2's working (sub)titles.
"DAT" probably does not stand for "Death and Taxes", another of Oni2's working (sub)titles. ^_^

DAT file format (file table)

The common format of the three "binary data" files is as follows (illustrated on the example of RB.DAT).

Offset Type Raw Hex Value Description
0x00 4CC 44 41 56 45 "DAVE" a control code
0x04 int32 18 41 00 00 16664 number of file table entries (files or folders)
0x08 offset 00 18 04 00 0x41800 offset to start of file name block, from 0x800, in bytes
0x0C offset 00 30 0A 00 0xA3000 offset to start of file data block, from 0x800, in bytes
0x10 char[2032] 00 ... 0 padding
File table, first entry
0x800 offset 00 00 00 00 0x00 offset to file name, from start of file name block, in bytes
  • in this case it points to 0x800+0x41800+0x00=0x42000
  • the string at that address is actlog.txt (null-terminated)
0x804 offset BC D9 1F 02 0x21FD9BC absolute offset to file data, from start of DAT file, in bytes
0x808 int32 00 08 00 00 2048 uncompressed file size, in bytes
0x80C int32 94 00 00 00 148 compressed file size, in bytes
File table, second entry
0x810 offset 0B 00 00 00 0x0B offset to file name, from start of file name block, in bytes
  • in this case it points to 0x800+0x41800+0x0B=0x4200B
  • the string at that address is Audio/ (null-terminated)
0x814 offset 22 D3 1D 02 0x21DD322 absolute offset to file data, from start of DAT file, in bytes
  • the offset 0x21DD322 points to no actual data in this case
  • is it common to folders (as in this case) and empty files
0x818 int32 00 00 00 00 0 uncompressed file size (zero; it's a folder)
0x81C int32 00 00 00 00 0 compressed file size (also zero)
File table, third entry
0x820 offset 12 00 00 00 0x12 offset to file name, from start of file name block, in bytes
  • in this case it points to 0x800+0x41800+0x0B=0x42012
  • the string at that address is Audio/banks/ (null-terminated)
0x824 offset 22 D3 1D 02 0x21DD322 absolute offset to file data, from start of DAT file, in bytes
  • the offset 0x21DD322 points to no actual data in this case
  • is it common to folders (as in this case) and empty files
0x828 int32 00 00 00 00 0 uncompressed file size (zero; it's a folder)
0x82C int32 00 00 00 00 0 compressed file size (also zero)
File table, fourth entry
0x830 offset 1F 00 00 00 0x1F offset to file name, from start of file name block, in bytes
  • in this case it points to 0x800+0x41800+0x1F=0x4201F
  • the string at that address is Audio/banks/attack.bd (null-terminated)
0x834 offset 00 00 53 06 0x6530000 absolute offset to file data, from start of DAT file, in bytes
0x838 int32 90 09 03 00 199056 uncompressed file size, in bytes
0x83C int32 13 85 02 00 165139 compressed file size, in bytes
...etc (rest of the file table)

The file table format is apparently a PS2 standard, and there are free tools like Game Extractor (basic version) that can display the folder structure and file sizes, and extract uncompressed files. However, while Game Extractor correctly identifies the compressed and uncompressed file sizes, it apparently does not know what the compression algorithm is (at least in the free version, the compressed files are extracted as-is, and are thus unusable). Only very short files are packed without compression (mostly trivial-looking stub files of little interest).

After some forum lurking, it becomes clear that the compression algorithm is ZIP, or rather "deflate", in its most common implementation (open-source ZLIB library). However, the compressed files have no ZIP header, so the decompressor/compressor must use the right default settings for this to work. The correct setup is as follows:

z_stream infstream; // initialization of the "inflate" stream
infstream.zalloc = Z_NULL;
infstream.zfree = Z_NULL;
infstream.opaque = Z_NULL;

infstream.avail_in = (uInt)(size_comp); // size of compressed input
infstream.next_in = (Bytef *)file_comp; // input file (char array)
infstream.avail_out = (uInt)(size_orig); // size of decompressed output
infstream.next_out = (Bytef *)file_orig; // output file (char array)
    
// the actual DE-compression work.
inflateInit2(&infstream,-15);
inflate(&infstream, Z_NO_FLUSH);
inflateEnd(&infstream);

The important line, which defines the decompression rules, is inflateInit2(&infstream,-15). -15 means maximum compression and no header. For more details, c.f. the ZLIB documentation.

With proper decompression, the DAT files extract as follows: BANKS.DAT RB.DAT STREAMS.DAT

  • STREAMS.DAT holds 22 *.stm files (21 vocalization sounds and 1 musical piece). See below for the STM format and a link to the converted sound files.
  • BANKS.DAT holds 13 sound sets, each of which is a pair of a *.hd file (similar to Oni's OSGr?) and a corresponding *.bd file (similar to a group of Oni's SNDD bundled together). The *.bd files in BANKS.DAT are identical to the ones stored in RB.DAT (in the Audio/banks/ folder), and possibly redundant. The *.hd files are not duplicated in RB.DAT, which instead has plain-text *.td files (apparently all three file types are supposed to work together, but perhaps *.hd is just a binary version of *.td with some additional features)
  • RB.DAT holds all the rest of the game data: textures, levels, characters, animations, scripts, etc.

Commonplace file formats

Some of the files in RB.DAT are either in plain text or in otherwise widely known formats that can be opened by third-party programs. Here is the list of such commonplace formats used in Oni 2.

  • *.txt : Text files. Some in Windows format (CR+LF at EOL), some in Unix format (only LF at EOL)
  • *.mb : Binary file used by Maya 3D program (work-in-progress models of some characters and props)
  • *.mb.swatches : Maya swatches, whatever they are. There are also *.mel files (plain text)
  • *.wav : WAV. A common format for the uncompressed storage of sounds (through pulse-code modulation)
  • *.tga : Targa. A versatile texture format that supports RLE compression, MIP map storage, indexed as well as RGB color schemes, and transparency (and therefore is widely used in games).
  • *.xml : XML.
  • *.cue : Cue sheet. Occurs only once, as rb.cue at the root of RB.DAT
  • *.m2v : MPEG-2. Video files. Occur in the form of movies/angel.m2v and movies/rockstarlogo.m2v
  • *.doc : Microsoft Word file
  • *.xls : Microsoft Excel file
  • *.psd : Adobe Photoshop file
  • *.tif : TIFF image file
  • *.lnk : Microsoft shortcut

Plain text file formats

Apart from XML files (and some TXT and *.log files; mostly debug logs), Oni 2 has many custom plain-text files, listed below.

Save files - occurs only in the form of sample.oni2save at the root of RB.DAT

Template files - occurs only in the form of template/rb.template and a couple of layout.template files (see Layout files below)

Graph files - files ending in .graph, found in layout/*/

Layout files - files that specify the layout of a level. They're called names like layout.actors, layout.et (entities), layout.graphs, layout.groups, layout.lights, layout.paths, layout.fog, layout.atktab (attack table), layout.template, layout.campack (also layout.campacknew), layout.bnds (bounds)

Environment settings - occurs only in the form of default.environment files in various layout/*/ folders

"rb" files - core settings of some sort found in Settings/: rb.ammo, rb.expl (explosions), rb.formations, rb.fx (effects), rb.gamedata, rb.gt, rb.inventory, rb.patterns, rb.proj (projectiles), and rb.weap (weapons). Also Audio/rb.audiopackages and fx/rb.fxe, as well as the aforementioned template/rb.template. ("rb" possibly stands for "Rebirth", one of Oni2's working (sub)titles.)

UI files - two files ending in .ui, found in Settings/: rbfrontend.ui and rbgame.ui

Tuning files - two files ending in .tune, found in Settings/: pad.tune and pad_before_massive_tuning.tune

Script files - files ending in .oni, rather similar to BSL. Can be compiled into binary *.onc files.

Model files - files ending in .mod (or .mod.bak or .mod.old) or .xmod. Version 1 format is plain-text, version 2 is binary (see below for both).

Pathfinding files - files ending in .room and .bsp, found in Level/*/

Mesh files - files ending in .mesh, found in Level/*/ (pathfinding) or Entity/*/ (explosions and gun flares)

Fighting state machines - files ending in .fsm, found in Statemachine/

Attack patterns - files ending in .atk, found in Statemachine/ and layout/fightai_grapple/statemachine_backup/

Formation files - files ending in .frm, found in Settings/, apparently something to do with the GUI page layout.

HUD setting files - occurs only in the form of Settings/HUD_Settings.hud

Control mapping files - occurs only in the form of Settings/control.map

Particle files - files ending in .ptx, found in Settings/

Shader files - files ending in .shader, used as an intermediate between models and their textures.

"Neat" files - two files ending in .neat in Entity/kno/ (apparently improved .shader files)

Attack FX tables - files ending in .attackfxtable, found in fx/

Effect lists etc - files ending in .fxl and .fxm, found in fx/

Jump files - files ending in .jump, found in entity.tune/animpkg/nav/

Locomotion files - files ending in .loco, found in entity.tune/animpkg/nav/, and in the respective folders of some character entities.

Blocking files - files ending in .blk, found in entity.tune/*/, and in the respective folders of some character entities.

Reaction files - files ending in .rct, found in entity.tune/*/

Animation packages - files ending in .apkg (and .apkg.txt), found in entity.tune/animpkg/. Also, template file entity.tune/animpkg/nav/nav.tpkg

Animation collections - files ending in .anims or .Anims, found in entity.tune/*/, and in the respective folders of some animated entities.

Attack data files - files ending in .atdt (or .atdt.bak), found in entity.tune/*/, and in the respective folders of some character entities.

Attack collections - files ending in .attacks, found in entity.tune/*/, and in the respective folders of some character entities.

Attachment files - occurs only in the form of entity.tune/erc/erc.attach

Fighter data - occurs only in the form of entity.tune/kno/kno.ft

Weapon data - files ending in .weap, found in entity.tune/*/. Possibly related to Settings/rb.weap

Sound library - files ending in .sndlib, found in entity.tune/*/

BFG files - files ending in .bfg, found in layout/*/ and Entity/*/

MMB files - files ending in .mmb, found in layout/*/

Entity type - files ending in .type, found in Entity/*/ (mostly entity.type or Entity.type)

Bounds and physics - files ending in .bnd (mostly Bound.bnd or Bound#.bnd) and .phys (either Bound.phys or Bound#.phys), found in Entity/*/

Shape files - files ending in .sha, found in Entity/*/

Skeleton files - files ending in .skel, found in Entity/*/ for rigged/animated models

Edge files - files ending in .em, found in Entity/*/ (for character collision?)

Gait files - files ending in .gait (or .gait.bak), found in Entity/*/ for characters (a gait is a "manner of walking")

TC files - files ending in .tc, found in Entity/*/ (apparently for animated textures; "texture collection"?)

Playback files - files ending in .play, found in Entity/jae/ and Entity/krk/

"lot" files - files ending in .lot, found in Entity/ (lists of *.mb files). Also Entity/back.lot.withTemplates

"ini" files - occurs only in the form of Entity/button.ini

"mel" files - apparently Maya project definition (plain text)

"attr" and "geom" - only occur as Entity/proxy/exportTMP/exportTmp/set_temp1.attr and Entity/proxy/exportTMP/exportTmp/static.geom

Some plain-text files do not have an "extension". Usually those are either empty files, or dummy files of an identifiable type. Examples are tim_atk_FCH1_rht_pch_uprcutreadme (a plain-text "readme" file), trashpath and guardpos (unused stubs of .oni-like scripts), ack (some kind of skeleton data for Konoko) and pants

STM file format (sound stream)

There are some regular WAV files in Audio/banks/wav/ [and some audio streams encoded in the *.bd' files, not yet reverse engineered at the time of writing geyser (talk) 01:40, 6 February 2018 (CET) ], but there is also a WAV-like format called STM (unrelated to the MIDI-like STM file mentioned on Wikipedia).

To be documented later. The WAV files obtained after conversion can be found HERE

TEX file format (texture)

A texture format similar to Oni's TXMP.

To be documented later. The TGA images obtained after conversion can be found HERE

Some of the textures are temporary or alternative copies, and so their filenames don't end in .tex but .tex.old or .tex.highRes

MOD file format (plain text)

Most of Oni 2's models are in a plain text format identified as "version: 1.10".

...

MOD file format (binary)

The more recent model format is a binary format identified as "version: 2.10". Apart from the more compact binary storage, it seems equivalent to the plain-text 1.10 format described above.

...


SNE file format (binary)

...


HD and BD file format (binary)

...


ANIM file format

All of the .anim files in Oni2 are uncompressed, and store translation, rotation and scaling values as regular IEEE floats. The meaning of each float (whether it is a translation, a rotation or a scaling, what its axis is, and which bone it corresponds to) is described in the .skel file (skeleton) of the mesh: the transforms are parsed in the same order as they appear in the .skel file. The link between the skeleton and the animation is established at the level of the "entity", and is not detailed here.

For rotations, most commonly the full triplet of Euler angles is stored, and for translations the full position vector. For a few UI elements the pose is limited to a rotation around 1 axis (indicated in the .skel file), and therefore a single float is enough to describe the pose. Sometimes a rotation axis is present in the .skel but locked at a fixed value - in that case the keyable values are reduced to the remaining rotation axes. Scaling triplets are present, e.g., for the "Buco" robots.

There is no time compression. The complete pose (i.e., all the keyable translations/rotations/scalings listed in the .skel) is stored for each consecutive frame in the animation (i.e., if the transformation for a bone does not change at all for a certain time range, or during the whole animation, it is stored for each frame anyway). The frame rate is 30 fps.

Apart from the floats (translations and rotations for each pose/frame), each .anim file has a header, which announces, among other things, the number of transforms per frame and the number of frames. The header can be of the following three types:

Offset Type Raw Hex Value Description
0x00 4CC 41 4E 49 31 "ANI1" animation type "ANI1" (example file: kno_atk_comb_bak_bakkckCH.anim)
0x04 bitset 00 00 00 80 0, 0, 0, 128 flags; the following bits occur in the original files (values in hex):
0x01 00 00 00 - unknown
0x00 00 00 80 - has detailed (per-frame) root motion data
0x08 int32 21 00 00 00 33 number of frames
0x0C int32 78 00 00 00 120 number of transforms per frame (must be consistent with the number of keyable values in the .skel file). In this example the skeleton is kno.skel, which has 39 bones; all bones have an XYZ rotation triplet (Euler angles), and the root bone also has an XYZ translation triplet; hence there will be 120 values in total (plus the detailed root motion).
0x10 float BD 97 4D BD -0.0502 total root motion along X (matches the cumulated X values of the detailed root motion track, if any)
0x14 float 00 00 00 00 0.0 total root motion along Y (matches the cumulated Y values of the detailed root motion track, if any)
0x18 float 63 A7 03 BF -0.514 total root motion along Z (matches the cumulated Z values of the detailed root motion track, if any)

Offset Type Raw Hex Value Description
0x00 4CC 61 6E 69 00 "ani"+null animation type "ani" (example file: kno_atk_BLH1_lft_punch.anim)
0x04 bitset 01 00 00 00 1, 0, 0, 0 flag(s); the following bits occur in the original files (values in hex):
0x01 00 00 00 - unknown
0x08 int32 51 00 00 00 81 number of frames
0x0C int32 A2 00 00 00 162 number of transforms per frame (must be consistent with the number of keyable values in the .skel file). In this example the skeleton is the (missing) xkno.skel, which has 53 bones; all bones have an XYZ rotation triplet (Euler angles), and the root bone also has an XYZ translation triplet; hence there will be 162 values in total.
0x10 float 7D 18 7D BD -0.0618 total root motion along X (matches the keyed motion of the root bone)
0x14 float 00 00 00 00 0.0 total root motion along Y (matches the keyed motion of the root bone)
0x18 float 00 00 00 00 0.0 total root motion along Z (matches the keyed motion of the root bone)
0x1C byte 01 1 flag(s); the following bits occur in the original files (values in hex):
0x01 00 00 00 - unknown

Offset Type Raw Hex Value Description
0x00 4CC 00 00 00 00 null chars "short" animation type (example file: kno_BR2H1_HighPunchBackRight.anim)
0x04 int32 51 00 00 00 81 number of frames
0x08 int32 A2 00 00 00 162 number of transforms per frame (must be consistent with the number of keyable values in the .skel file). In this example the skeleton is the (missing) xkno.skel, which has 53 bones; all bones have an XYZ rotation triplet (Euler angles), and the root bone also has an XYZ translation triplet; hence there will be 162 values in total.
0x0C float AA 9D 00 3E 0.126 unknown
0x10 byte 01 1 flag(s); the following bits occur in the original files (values in hex):
0x01 00 00 00 - unknown

Immediately after the header begin the keyed values (floats), grouped by frame: first all the keyed values for frame 0, then for frame 1, etc.

For each frame, the keyed values correspond to the ones listed in the .skel and occur in the same order. The typical order is:

X translation of "root"; Y translation of "root"; Z translation of "root"
X rotation of "root"; Y rotation of "root"; Z rotation of "root"
X rotation of 1st child of "root", typically "spine_01"; Y rotation of "spine_01"; Z rotation of "spine_01"
... XYZ rotation for all the children of "spine_01", in hierarchical order (same as in the .skel)
X rotation of 2nd child of "root", typically "pelvis"; Y rotation of "pelvis"; Z rotation of "pelvis"
... XYZ rotation for all the children of "pelvis", in hierarchical order (same as in the .skel)
Detailed XYZ root motion (if any; can only occur in ANI1 type animation). Stored as single-frame increments.

Rotations are stored as XZY Euler angles (first rotation is around bone's Y, then around the new Z, and finally around the latest X). Angle values are in radians.