XML:BINA/OBJC/TRIG

general notes

• BINACJBOTrigger.oni is level specific. (It can be found in edition/GameDataFolder/levelXX_... )

BSL support

command	description	example
marketing_line_off	turns the laser line off	marketing_line_off = 1
trig_activate trigger_id:int	activates a trigger	trig_activate 2
trig_deactivate trigger_id:int	deactivates a trigger	trig_deactivate 2
trig_hide trigger_id:int	hides a trigger, disables also laser	trig_hide 91
trig_show trigger_id:int	shows a trigger	trig_show 91
trig_speed trigger_id:int volume:float	sets a triggers speed	trig_speed 514 .15
trig_reset trigger_id:int	resets a trigger to non-triggered state	trig_reset 91

XML structure

<?xml version="1.0" encoding="utf-8"?>
<Oni Version="0.9.28.0">
   <ObjectCollection>
       [...]
   </ObjectCollection>
</Oni>

[...] means at least one trigger. Paste all trigger data into there (this includes <Object ...> and </Object> tag).

example

       <Object Id="8136" Type="TRIG">
           <Header>
               <Flags>0</Flags>
               <Position>-445 68 -1362</Position>
               <Rotation>270 8.65141646E-06 180.000015</Rotation>
           </Header>
           <OSD>
               <Class>trigger_long</Class>
               <TriggerId>1</TriggerId>
               <Flags>44</Flags>
               <LaserColor>0 0 255</LaserColor>
               <StartPosition>0</StartPosition>
               <Speed>0</Speed>
               <EmitterCount>3</EmitterCount>
               <Offset_0075>0</Offset_0075>
               <Offset_0077>0</Offset_0077>
               <Events>
                   <ActivateTurret TargetId="1" />
               </Events>
           </OSD>
       </Object>

tags

• <Flags> : unknown
• <Position> : (trigger is spawned at this xyz-position)
• <Rotation> : (trigger has xyz-rotation (in degrees))
• <Class>

trigger_arc

trigger_circle

trigger_evilbrain

trigger_long

trigger_long4x

trigger_long4xzag

trigger_rectangle

trigger_sb3A

trigger_sb3B

trigger_short

(link by name to the TRIG instance (trigger class), which holds the M3GM of the rail and links to TRGE (laser emitter class) and OBAN (animation of the emitters))

(Screenshot of each would be good.)

• <TriggerId> : (used by BSL commands)
• <Flags> :

4 - active?

8 - initial active

10 - reverse

20 - pingpong

40 - unknown

80 - unknown

• <LaserColor> : (RGB range, e.g. <LaserColor>255 0 77</LaserColor>)
• <StartPosition> : (float value; start position of the trigger in the rail; range from 0 (bottom) to 1 (top) in connection to the spawn point of the trigger (spawn point = bottom))
• <Speed> : (float value; reference: 0 means no movement, 1 is slow, and 2 is fast)
• <EmitterCount> : (number of laser emitters in one trigger rail)
• <Offset_0075> : (laser is on for a number of frames you set here)
• <Offset_0077> : (laser is off for a nubmer of frames you set here)

(example: when you set 360 (at offset 0x75) and 120 (at offset 0x77) then the laser gets disabled after 6 seconds for 2 seconds, then loops; note that the laser will be off all if you set 0x75 to 0 and 0x77 to a number bigger than 0)

• <Events>

• <Script Function="calling_this_BSL_function" />
• <ActivateTurret TargetId="Id" />
• <DeactivateTurret TargetId="Id" />
• <ActivateConsole TargetId="Id" />
• <DeactivateConsole TargetId="Id" />
• <ActivateAlarm TargetId="Id" />
• <DeactivateAlaram TargetId="Id" />
• <ActivateTrigger TargetId="Id" />
• <DeactivateTrigger TargetId="Id" />
• <LockDoor TargetId="Id" />
• <UnlockDoor TargetId="Id" />

(You can have more than one and different event types at same time.)