Mod Tool: Difference between revisions

Revision as of 02:40, 7 February 2021

sub pages Mod_Tool/Scripting Mod_Tool/Rigging Mod_Tool/OniTools_addon Mod_Tool/Oni_level_rebuilder

General information

Full name: "Autodesk Softimage Mod Tool". Usually we just call it "Mod Tool" or "XSI" (old name of the program).

Beside the free version, there's also the retail and student version "Autodesk Softimage [year]"

2015 is last version. Autodesk's development will focus on Maya and 3ds Max.

Those versions are also available as 64-bit versions.

But in the very most cases "Mod Tool" is enough to modify Oni.

There's also the possibility to get files that extent Mod Tool's range of functions.

Those are scripts (.vbs, .js), toolbars (.xsitb) and addons (.xsiaddon).

They can be created on one's own and also shared with other users.

Wanted knowledge:

How to setup particle in Mod Tool? We still need an Oni particle editor!
How to rig models and then extract the animation data?
How to make complex new UV-maps?

Extensions

links

"Roadkill" UV Tool
drag and drop support for OBJ files
OBJ exporter
OBJ + OFGA exporter for Oni
- might need the regular OBJ exporter to be installed first
adjusting existing fw throws (instructions)
put more links here

how to bind scripts to buttons (embedded code or .vbs / .js)

You can enable/disable the Main Shelf over "View" > "Optional Panels" > "Main Shelf". Then click the "Custom" tab.
A) Right-click the free gray space, click on "Customize Toolbar...". Select "Toolbar Widgets" > "Script Button".

Enter your code and make sure you selected the correct Scripting Language. Click okay when you are done.

B) You can also drag'n'drop your script file directly onto the free gray space.

A new window pops up, check the settings and click okay when done.

Right-click the Main Shelf and use the "Save" option. ("Save As" let you save the Main Shelf as toolbar file.)

how to install toolbars (.xsitb)

creation: goto "View" > "New custom toolbar"

Now you can add buttons like in Main Shelf. Remember to save your changes. (Right-click, "Save As".)

installation: Drag'n'drop the xsitb file onto the viewport (it's simply the window where you can see 3D objects).
access: goto "View" > "Toolbars"
deletion: goto "View" > "Manage..." Check a toolbar and click Delete button.

The file will remain with a new file suffix ".bak" You can restore this backup if you remove the ".bak" from the name.

how to install add-ons (.xsiaddon)

A) drag'n'drop the file into the so-called viewport (it's simply the window where you can see 3D objects), then restart Mod Tool
B) if drag and drop doesn't work, goto "File" > "Add-On" > "Install"

Then click on the "..." button to search for the file. When you found it, click the "Install" button.

building add-ons (http://softimage.wiki.softimage.com/sdkdocs/cus_addons_WalkthroughBuildinganAddon.htm, dead link)

Building an add-on file needs more effort than the other 'extensions' but for the end user it's best because it can hold all other files: toolbars, plugins (scripts), etc.
- The user can install a newer version of the addon by repeating the installation with the new file: it's unnecessary to remove the old version.
File > Add-On > Package... doesn't work with ModTool "Add-Ons cannot be created with Softimage Demo Version."
Images and any other files can be put into any folder of the add-on.
- Let's say you have an addon called "my_stuff", a subfolder "images" and an image called "test.png". The image can be accessed via:

XSIUtils.ResolvePath("$XSI_USERHOME/") & "Addons\my_stuff\images\test.png"

The problem with embedded code: commands like CreatePrim can call an property page (PPG).
- Those popups can be disabled. Search for "disabling PPG popups" on this page.
Putting scripts simply into folders doesn't work, they must be "plugins", the file extension can be the same e.g. "vbs".
- A script function can run on another computer if it is found as command, and plugin register new commands.
- E.g. you can use those commands in your toolbar's script buttons.
Example of turning a function into a command:

function with arguments as it is

' this function can only be used inside the script where it was defined

function simple_math (a, b, operator)
	if operator = "+" then
 		simple_math = a + b
	elseif operator = "-" then
		simple_math = a - b
	elseif operator = "/" then
		simple_math = a / b
	elseif operator = "x" then
		simple_math = a * b
	else
		logmessage "The used operator is not allowed. Choose one of the following:" & vbCrlf & "+ - / x"
	end if
end function

' example of usage
result = simple_math(5, 3, "+")
logmessage result

the same function as command

' the command simple_math can now be used in any script

function XSILoadPlugin( in_reg )
	in_reg.Author = "your_name"
	in_reg.Name = "simple_mathPlugin"
	in_reg.Email = ""
	in_reg.URL = ""
	in_reg.Major = 1
	in_reg.Minor = 0

	in_reg.RegisterCommand "simple_math","simple_math"
	'RegistrationInsertionPoint - do not remove this line

	XSILoadPlugin = true
end function

function XSIUnloadPlugin( in_reg )
	dim strPluginName
	strPluginName = in_reg.Name
	Application.LogMessage strPluginName & " has been unloaded.",siVerbose
	XSIUnloadPlugin = true
end function

function simple_math_Init( in_ctxt )
	dim oCmd
	set oCmd = in_ctxt.Source
	oCmd.Description = ""
	oCmd.ReturnValue = true

	dim oArgs
	set oArgs = oCmd.Arguments
	oArgs.Add "a",siArgumentInput,"0"
	oArgs.Add "b",siArgumentInput,"0"
	oArgs.Add "operator",siArgumentInput,"0"
	simple_math_Init = true
end function

function simple_math_Execute( a, b, operator )
	' convert to double
	a = cdbl(a)
	b = cdbl(b)
	
	if operator = "+" then
		simple_math_Execute = a + b
	elseif operator = "-" then
		simple_math_Execute = a - b
	elseif operator = "/" then
		simple_math_Execute = a / b
	elseif operator = "x" then
		simple_math_Execute = a * b
	else
		logmessage "The used operator is not allowed. Choose one of the following:" & vbCrlf & "+ - / x"
	end if
end function

Selected wisdom

We've also a tutorial thread on OCF.

Hotkey list can be found here.

Visibility

show/hide grid: [G]
display polygon normals: click the eye symbol, select "Polygon Normals" (now you know the polygons up and down)
display triangle count: click the eye symbole, select "Selection Info"

Camera navigation

reset view: [R]
zoom camera: [Scrolling]
move camera: [S] + [LClick] + [MoveMouse]
rotate camera: [S] + [RClick] + [MoveMouse]
pan camera: [S] + [MClick] + [MoveMouse]
move camera mode: [Z]
rotate camera mode: [O]
pan camera mode: [P]
use camera mode move/rotate/pan with: [LClick] + [MoveMouse]

Mesh

scale mode: [X]
rotate mode: [C]
translate mode [V]
manipulate tool: [B] (a gray box appears with gray balls at the corners)
- drag inside the object to move it
- drag an edge to rotate it
- drag a ball to scale it
object selection mode: [Space]
extracting a polygon from an object: select polygon, right-click, "Extract Polygons (Delete)"
copying an polygon from an object: select polygon, right-click, "Extract Polygons (Keep)"
merging two objects: select object A, then goto Model > Modify > Poly. Mesh > Boolean > Union, select object B

(this makes a copy of object B and attaches it to A, the merged objects (A) must be freezed before the original object B can be removed)

filling a hole: select all edges surrounding the hole and choose one of the following methods
- A) goto Model > Modify > Poly. Mesh > Weld Boundary Points/Edges
- B) goto Model > Modify > Poly. Mesh > Bridge Boundary Points/Edges (if blue lines appear try to disable the checkbox "Angle > 90")
merging two objects at blue lines: merge the objects at first, then proceed with the point above "filling a hole"
merging two objects with UVs: Create > Poly. Mesh > Merge
- extracted Oni characters have their materials and hence textures directly grouped under the mesh (see Explorer)
- when adding (merging) a new part to the existing mesh, the materials/textures will be grouped under (Explorer again) mesh > Polygon Mesh > Clusters > ...
- Samer reported that saving the file via fbx solves a problem when trying to convert TRBS
- one would need to move the content by hand in the explorer to bypass the fbx
hiding some objects/polygons: select object/polygon and hit [H], use [Control] + [H] to unhide all
mirroring an object: select object, Modify > Poly. Mesh > Symmetrize Polygons
working with symmetry mode (look below at "Low poly modeling" section for other possibilities with symmetry)
- select object, Property > Symmetry Map (YZ/XZ/XY) (press [W] to preview symmetry plane)
- click on Sym buttom (in Transform area) to enable/disable symmetry mode
- changing the Symmetry plane: Explorer [8] > unfold object > Polygon Mesh > Cluster > delete SymmetryMapCls; then add a new symmetry plane

Low poly modeling

select edge loop: while being in selection mode Edge, press [Alt] + [MClick]
modify point/edge/polygon: [M]
- press left mouse button and hold it, move mouse to translate point/edge/polygon freely

if axes symbol is active you can left-click a component and the translate axes pop up

if magnet symbol is active the translation will be limited by the surrounded components

if point symbol is active then only points can be selected, moving one point onto another will weld them

By the way, combining edge loop with component selection [M] and active magnet gives an interesting effect: a line of edges will mimic the shape of their neighbor edges as closer the selected edges comes to the neighbors.

getting images into Mod Tool that serve as modeling reference:
- click where you can set the view mode (e.g. to "Wireframe"), select "Rotoscope"
- in the appearing window at "Image Placement" choose "Fixed" so that the image will be zoomed when you zoom on the object
- choose an image by clicking the button "New"

symmetry in modeling:

You could make A) only one half of an object or B) selected polygons and then mirror and merge the parts.

A) select object, [Alt] + [RClick] object, Symmetrize Polygons
B) select polygons, [RClick] one of them, Symmetrize Polygons

Or you start with a half object and create a mirrored clone. You can then work on the original mesh. (In Schematics the cloned mesh will have a red "Cl" and a trapezoid shape as symbol.)

select object then goto Edit > Duplicate/Instantiate > Clone Single
scale X or one of the other axes to -1
make any modification on the original mesh, the clone will adept them
eventually merge cloned and original mesh, freeze them to make changes final

Exchange meshes in hierarchies

Let's say you loaded an Oni character with his 19 body parts into the scene, something is wrong and you want to fix it.

To destroy the hierarchy you must be sure the model is not animated. If there are keyframes the model will be one big mess after breaking the hierarchical links.

So, save the model with the settings "Selection Only [X]" and "Animation [ ]". Then reload the model.

Next, disable the red "Auto" button under "Animation" (if enabled). Keyframes affects also the creation of hierarchies, that's why we don't want new keyframes.

Now you can safely exchange, move and rotate meshes and their centers, and eventually rebuild the hierarchy.

Material and texture

how to apply a new main texture

how to apply a new polygon cluster texture

objects use the scene material by default, objects need their own material if they should have individual textures
selecting a material and surface: Model > Material > Phong (simply close the windows that pops up)
connecting the texture with the material:
- [7] to open Render Tree
- in first column: "Texture"
- in second column: drag'n'drop "Image" into the free space
- click and hold the red point of "Image", then move it to "Phong" and release the mouse click
- choose "diffuse" as illumination mode (for instance "ambient" won't work - the texture would be visible in Mod Tool but Onisplit can't use it)
now "Image" can be double-clicked (the Texture Editor will pop up), in the section "Image" click on "New" to choose an image
to change textures don't drag and drop textures directly one meshes, this creates textures layers which are ignored by OniSplit

Projection and UV

getting started

in section "Texture Projection" click on "New", choose a projection similar to the mesh shape (planar / cylindrical / cubic / spherical)
select the object
Texture editor: [Alt]+[7] (open it while being in selection mode "Object" or "Polygon", otherwise the UVs aren't shown)

modify single/all UVs

rotate 90°: [R]
rotate: [C]
scale: [X]
scale height only: [X], then [Shift] + [MClick] + [MoveMouse]
scale length only: [X], then [Shift] + [RClick] + [MoveMouse]
move: [V]
tearing single UV parts: [Control] + [T], then move [V]
heal (re-connect) selected UV parts: click on the plus symbol (the parts should be very near to each other, best if the points are on same spot)
snap function for move tool: Snap > Enable Snapping; check "Points" (if not already active)
relax (smooth warped UVs): [Control] + [R] (usually pressing several times that combination)
a new projection can also be applied to currently selected UV parts
freeze object to bake projections (green lines in the 3D view will disappear)
getting a picture of the UV: apply first a black texture then enter the Texture Editor [Alt] + [7], Edit > Stamp UV Mesh [Shift] + [S], save the texture

Things to test:

http://vimeo.com/67783125

Rendering

Rendering doesn't work well on my PCs.--paradox-01 (talk) 01:09, 9 March 2016 (CET)

Especially PNG, it works one time. But as soon as I import another dae the next render will fail.

So, for creating a object library we might use blender. Nice thing is, it can also render in the background when called from CMD. This means you could keep working in XSI and render images in blender at the same time.

example of a batch file:

cd C:\Program Files\Blender Foundation\Blender
blender -b --python C:\Users\Paradox-01\Desktop\blender-out\pythonScript.py

example of a render script:

import bpy

# delete blender default cube object
bpy.ops.object.mode_set(mode='OBJECT')
bpy.ops.object.select_by_type(type='MESH')
bpy.ops.object.delete(use_global=False)

# load new object
bpy.ops.wm.collada_import(filepath = "C:/Oni/r.dae")

# render settings
bpy.data.scenes['Scene'].render.resolution_x = 900
bpy.data.scenes['Scene'].render.resolution_y = 900
# default resolution percentage seems to be 50 
bpy.data.scenes['Scene'].render.resolution_percentage = 100
bpy.data.scenes['Scene'].render.use_antialiasing = True
# 5 | 8 | 11 | 16
bpy.data.scenes['Scene'].render.antialiasing_samples = "8"

#TGA IRIS JPEG MOVIE IRIZ RAWTGA
#AVIRAW AVIJPEG PNG BMP FRAMESERVER
#no gif ? could be created by more code, maybe merging single frames of jpgs
bpy.data.scenes['Scene'].render.image_settings.file_format = 'JPEG'
bpy.data.scenes['Scene'].render.image_settings.quality = 100

# file suffix is overwritten by file_formate
#bpy.data.scenes['Scene'].render.filepath = 'C:/Oni/renders/test.jpg'
bpy.data.scenes['Scene'].render.filepath = 'C:/Oni/renders/test'

# start render
bpy.ops.render.render( write_still=True )

Animating

an animation that got scaled down from 116 to 58 frames

preparing ModTool to save animations Oni can use: File > Preferences... > Preferences > Tools > Output Format
- Frame Step: 1
- Frame Format: Custom framerate
- Frame Rate: 60
for real-time playback click on "Playback" option button and then "Real-Time Playback"
opening the Animation Editor : [0]
opening the DopeSheet: from any other Animation Editor, Editor > DopeSheet
making an animation shorter or longer: in DopeSheet click Region button (arrow with rectangle), click and hold to select keyframes, at selection edge a) [shift] plus left-click and move mouse or b) middle-click and move mouse

Issues when saving and sharing animation files (.dae, .exp)

That what you currently see in Mod Tool and that what you get when saving data can be different.

1) *.dae files might save data differently than expected.

Rotation flips might appear.

2) *.exp and *.dae save data differently.

.exp files store the frames as they are.

.dae file store their actions (rotations/translation/...) in seconds and eventually depend on what framerate a Modder uses.

Following scenario: a modder wants to share an animation as *.exp and another modder wants to use that animation.

Modder A uses 30 fps in his settings and exports an *.exp that is 58 frame long.

Modder B uses 60 fps in his setting and imports the *.exp, to his surprise the animation is 116 frames long. What now?

If Modder B saves the *.exp under a new name would not help, the frames will be still the same.

Instead Modder B could scale the animation. The way to do so is described in the Animating section, "making an animation shorter or longer".

Modder B scales the animation and saves it as dae.

Now he wants to see if it worked. He opens a new scene [Strg]+[N] and loads the dae.

Summary of issue-holding aspects

Frames Per Second (FPS)

When you share *.dae files with other Modders be sure that the output formate is 60 fps. Different framerates among modders can cause confusion.

Dae file store their actions (rotation/translation/...) in seconds.

An example:

<float_array count="10" id="pelvis_rotation_x_ANGLE-anim-input-array">
    0.000000 0.166833 0.333667 0.500500 0.600600 0.934267 1.267933 1.601600 1.768433 1.935267
</float_array>

action at [s] * framerate [f/s] = frame [f]

In this example the last rotation occurs at 1.935267s.

Modder A uses 30 fps, his last frame is 58.

Modder B uses 60 fps, his last frame is 116.

Euler rotations

you will get BEZIER (cubic) interpolation instead of LINEAR if you use

"Convert Quarternion Rotation to Euler"

"Spline Interpolation" in the animation (fcurve) editor

Those smooth the rotations.

[...]

Quaternion rotations

Don't use this.

[...]

Make Rotation Keys Continuous

[...]

Animation mixer

This could help with creating cutscenes and complex animations (e.g. run cycles for FILM files).

Open the animation mixer with [Alt]+[0].

Further information over HERE.

Here are a few videos:

Sounds

Within the animation mixer also sounds can be added.

Further information over HERE.

This could be used to synchronize sounds effect with physical actions in the scene.

Scripting

open the Script Editor: [Alt] + [4]
run the current code in the Script Editor window: [F5]
clear the log: Edit > Clear History Log
Actions from button embedded code will be logged.
Actions from code files that are linked in a button won't be logged. (This results in a performance boost.)
Logged stuff will be rewritten if you change the script language. (File > Preferences...)
You can also change the language by right-click the white script box and click on "Set to JScript" or "Set to VBScript".
Python can be added as script language if you install it on your PC.
Right-clicking the white script box gives you also access to a few code piece, e.g. "Syntax Help" > "If..Else" or "Catch Error".
Mark code you want to disable ("Comment Out") or enable ("Comment Remove").
You can save your code to a file via "File" > "Save As..." or "Save Selection"

Links

xsi wiki page about scripting
many vbscript examples
vbs commands
objFSO/objWSHShell: Scripts to manage Files (replace "Wscript.Echo" with "logmessage")
objFSO/objWSHShell: Scripts to manage Text Files
using external scripts
progress bar and open file dialog

Notes about polygon extraction

a grid of 9 polygons (ID 0 to 8)
you extract the middle polygon (ID 4)
grid's polygon of ID 8 will change to ID 4
if you now extract 5th, the 7th gets the ID
now the ID order is: 0, 1, 2, 3, 6, 5, 4
this means that an automatic extraction of several polygons requires two changes in the code
1) the ID array of selected polygons must be sorted
2) the extraction must start with the last ID to avoid ID shift during the process (see code pieces)

Some basics of VBScript

In VBS you declare variables only as a variant e.g. "dim PolygonCount". Mod Tool decides what type it becomes when it uses the variable the first time.
You can put "option explicit" at the start of your script. Then you will be forced to declare all variables with "dim". That looks quite unnecessary but help to find mistakes for example if you mistyped a variable somewhere in a long script.

The commands are not case-sensitive, e.g. you can write "LogMessage" or "logmessage".
Vbs functions can be found HERE.

' while it is possible to use + in strings,
' you should actually use & only for strings
' and + only for numbers

logmessage "How about ... " + "a riddle?"
logmessage "Where can you find following phrase in Oni? " & "The day is mine !!"
logmessage "Did you know that Bungie likes to hide sevens? The digits of the year 2032 add up to " & cstr(2 + 0 + 3 + 2) & "."

' INFO : How about ... a riddle?
' INFO : Where can you find following phrase in Oni? The day is mine !!
' INFO : Did you know that Bungie likes to hide sevens? The digits of the year 2032 add up to 7.

More tips

You can replace each "logmessage" with a variable. In that case don't forget the = sign.
Selection(0) means that from all selected objects the first one is taken.
Use a loop to get all objects.

for each n in selection
	logmessage n
next

In order to shorten the code you might want to set script objects.

The command to create a standard cube is CreatePrim "Cube", "MeshSurface"

If you use set name = the cube or other object will be available under that name.

Then you can use any valid method or property with that name.

Example:

set c = CreatePrim ("Cube", "MeshSurface")

logmessage selection(0).name
logmessage selection(0).length.value
logmessage c.name
logmessage c.length.value

' INFO : cube
' INFO : 8
' INFO : cube
' INFO : 8

Some ModTool commands in vbs language that might be interesting for Oni related stuff

LogMessage [string \| var \| object]	A command to log information. It requires a string or a variable. Example: LogMessage "The object's name is: " & selection(0).Name
logmessage selection.count	Logs the number of selected objects.
logmessage selection(0).Name	Logs the object name.
logmessage selection(0).Materials(0).Name	Logs the material name.
logmessage selection(0).Materials(0).Library.name	Logs the material library name.
logmessage selection(0).Materials(0).shaders(0).name	Logs the material shader (e.g. phong).
logmessage selection(0).Materials(0).CurrentImageClip.source.filename.value	Logs absolute path of the texture. Output example: C:\Users\RRM\Desktop\TV_tex.png
logmessage selection(0).Materials(0).CurrentImageClip.source.Parameters("XRes").Value logmessage selection(0).Material.CurrentImageClip.source.Parameters("YRes").Value	Logs the horizontal (X) and vertical (Y) pixel length of the texture. Output example: 512
logmessage selection(0).sclx.value logmessage selection(0).scly.value logmessage selection(0).sclz.value	Logs object's scaling (X, Y, Z).
logmessage selection(0).rotx.value logmessage selection(0).roty.value logmessage selection(0).rotz.value	Logs object's rotation (X, Y, Z).
logmessage selection(0).posx.value logmessage selection(0).posy.value logmessage selection(0).posz.value	Logs object's position (X, Y, Z).
logmessage selection(0).rotorder.value	Logs object's rotation order. Oni characters have ZYX as rotation order. 0 = XYZ 1 = XZY 2 = YXZ 3 = YZX 4 = ZXY 5 = ZYX
SelectObj [string \| var]	select one or more objects. Comma serves as separator. Example: SelectObj "grid,grid1"
ToggleSelection [string \| var]	Adds one or more objects from current selection. If the objects are already selected then they become subtracted from the selection. Example: ToggleSelection "grid2,grid3"
SelectAllUsingFilter [SelFilter], [CheckComponentVisibility], [AffectSelectionList], [CheckObjectSelectability]	Selects everything that matches the filter and other options. Example: SelectAllUsingFilter "object", siCheckComponentVisibility selects all roots, lights, cameras, and geometry (meshes) SelectAllUsingFilter "geometry", siCheckComponentVisibility selects all geometry (meshes)
DeselectAll	deselects everything
DeleteObj [string \| var]	Deletes one or more objects. Comma used as separator. Example: DeleteObj "grid" DeleteObj "grid,grid1"
FreezeObj	Makes all changes final. But saving those changes is still necessary. (Click on key symbol so it gets red.)
Translate [InputObjs], [X], [Y], [Z], [Delta], [RefMode], [Center], [AxesFilter], [Snap], [SnapReference], [SnapFilter], [SplitLocalComponents], [PropTagOnly], [Pivot], [PivotX], [PivotY], [PivotZ], [ConstructionMode], [SlideComponents]	see link
Rotate [InputObjs], [X], [Y], [Z], [Delta], [RefMode], [Center], [AxesFilter], [Reference], [SplitLocalComponents], [PropTagOnly], [Pivot], [PivotX], [PivotY], [PivotZ], [ConstructionMode], [SlideComponents]	see link

Code pieces (VB Script)

Remember that you can use the search function of your web browser.

If you see absolute paths adapt them so that the code works on your system too.

(Here's another page for math related code pieces.)

[1] creating and extending an array	[2] check selection mode	[3] getting the IDs of selected polygons plus sorting them
[4] converting euler rotations (in degrees) to quaternions	[5] converting quaternions to euler rotations (in degrees)	[6] get and set values of the playcontrol (timeline)
[7] get keyframes	[8] message box	[9] input box
[10] getting the desktop path	[11] selecting a folder	[12] selecting a file of a specific type
[13] reading out environment variables	[14] check if file exist	[15] check if folder exist + create folder
[16] write xml file	[17] read xml file	[18] read xml file (attribute/content-based)
[19] create txt file + write lines	[20] read txt file	[21] check onisplit version
[22] call CMD, e.g. to use onisplit	[23] building forms in ModTool	[24] UserDataBlob
[25] getting the position of points (with selection mode point)	[26] getting the position of points (with selection mode object)	[27] getting and setting the position of points (without selection)
[28] getting the rotation and position of selected objects	[29] getting the rotation and position of not selected objects	[30] decrypting merged integer flags
[31] disabling PPG popups	[32] disabling logmessages	[33] getting bounding box values
[34] open an explorer window	[35] working with hierarchies	[36] drag and drop (DnD) support for specific oni files
[37] dae export	[38] fbx export	[39] import an image clip only once
[40] layers	[41] onisplit update	[42] get vertex color
[43] get all used textures	[44] get global point position

' [1] creating and extending an array


' creating an array
' () sets the number of array items
redim nums (3)
for i = 0 to 3
	nums(i) = (i)
next

logmessage "output all items"
for each n in nums
	logmessage n
next
logmessage "first array item holds: " & lbound(nums)
logmessage "last array item holds: " & ubound(nums)
logmessage "-------------------------------------"


' extending an array
' use "preserve" to keep the old content
' find next higher value
plus_one = ubound(nums) + 1
redim preserve nums (plus_one)
nums(plus_one) = 4

for each n in nums
	logmessage n
next
logmessage "first array item holds: " & lbound(nums)
logmessage "last array item holds: " & ubound(nums)


' INFO : output all items
' INFO : 0
' INFO : 1
' INFO : 2
' INFO : 3
' INFO : first array item holds: 0
' INFO : last array item holds: 3
' INFO : -------------------------------------
' INFO : 0
' INFO : 1
' INFO : 2
' INFO : 3
' INFO : 4
' INFO : first array item holds: 0
' INFO : last array item holds: 4

' [2] check selection mode 

checkfilter
'use sub to make use of the exit command

sub checkfilter
	Select Case Selection.Filter.Name
	'caution: case-sensitive

	Case "object"
		logmessage "object mode"
	Case "Edge"
		logmessage "edge mode"
	Case "Vertex"
		logmessage "point mode"
	Case "Polygon"
		logmessage "polygon mode"
	Case Else
		logmessage "unknown mode"
		exit sub
	End Select
end sub

' [3] getting the IDs of selected polygons plus sorting them

poly_count = Selection(0).SubComponent.ComponentCollection.count
logmessage "poly_count: " & poly_count
redim selected (poly_count)
logmessage "Show ID as it is."
for i=0 to poly_count - 1
	' build ID array
	selected(i) = Selection(0).SubComponent.ComponentCollection(i).index
	logmessage selected(i)
next

' change sort order by replacing ">" with "<"
For i = 0 To poly_count - 1
	For j = 0 To poly_count - 1
		If selected(i) > selected(j) Then
			tmp = selected(i)
			selected(i) = selected(j)
			selected(j) = tmp
		End If
	Next
Next
logmessage "Show sorted ID."

for i=0 to poly_count - 1
	logmessage selected(i)
next

' [4] converting euler rotations (in degrees) to quaternions

dim x, y, z, dRotation, qRotation
x = 90
y = 0
z = 0

set dRotation = XSIMath.CreateRotation(XSIMath.DegreesToRadians(x), XSIMath.DegreesToRadians(y), XSIMath.DegreesToRadians(z)) 
set qRotation = XSIMath.CreateQuaternion() 

	dRotation.GetQuaternion (qRotation) 
	LogMessage qRotation.W
	LogMessage qRotation.X
	LogMessage qRotation.Y
	LogMessage qRotation.Z
	' INFO : 0,707106781186548
	' INFO : 0,707106781186547
	' INFO : 0
	' INFO : 0

' [5] converting quaternions to euler rotations (in degrees)

dim qW, qX, qY, qZ, qRotation, x, y, z

	qW = 0.707106781186548
	qX = 0.707106781186547
	qY = 0
	qZ = 0

set qRotation = XSIMath.CreateQuaternion (qW, qX , qY, qZ)

	qRotation.GetXYZAngleValues x, y, z
	logmessage XSIMath.RadiansToDegrees(x)
	logmessage XSIMath.RadiansToDegrees(y)
	logmessage XSIMath.RadiansToDegrees(z)
	' INFO : 89,9999999999999
	' INFO : 0
	' INFO : 0

' [6] get and set values of the playcontrol (timeline)

' timeline variables (tl)
dim tlStart, tlEnd, tlCurrent

' get values
tlStart = GetValue ("PlayControl.In")
tlEnd = GetValue ("PlayControl.Out")
tlCurrent = GetValue ("PlayControl.Current")

' set values
SetValue ("PlayControl.In"), 7
SetValue ("PlayControl.Out"), 70
SetValue ("PlayControl.Current"), 14

' [7] get keyframes

' keyframe counting code like "selection(0).rotx.Source.Keys.count" will produce an error if no keys exist
' that's why we need to catch possible errors for each counting

on error resume next
	logmessage "--------------------------------------------------"
	logmessage "X rotation keys: " & selection(0).rotx.Source.Keys.count
	for each k in selection(0).rotx.Source.Keys
		logmessage "index: " & k.index & " // time: " & k.time & " // value: " & k.value
	next
if err <> 0 then
	logmessage "no X rotation keys"
end if
on error goto 0

on error resume next
	logmessage "--------------------------------------------------"
	logmessage "Y rotation keys: " & selection(0).roty.Source.Keys.count
	for each k in selection(0).roty.Source.Keys
		logmessage "index: " & k.index & " // time: " & k.time & " // value: " & k.value
	next
if err <> 0 then
	logmessage "no Y rotation keys"
end if
on error goto 0

on error resume next
	logmessage "--------------------------------------------------"
	logmessage "Z rotation keys: " & selection(0).rotz.Source.Keys.count
	for each k in selection(0).rotz.Source.Keys
		logmessage "index: " & k.index & " // time: " & k.time & " // value: " & k.value
	next
if err <> 0 then
	logmessage "no Z rotation keys"
end if
on error goto 0

on error resume next
	logmessage "--------------------------------------------------"
	logmessage "X position keys: " & selection(0).posx.Source.Keys.count
	for each k in selection(0).posx.Source.Keys
		logmessage "index: " & k.index & " // time: " & k.time & " // value: " & k.value
	next
if err <> 0 then
	logmessage "no X position keys"
end if
on error goto 0

on error resume next
	logmessage "--------------------------------------------------"
	logmessage "Y position keys: " & selection(0).posy.Source.Keys.count
	for each k in selection(0).posy.Source.Keys
		logmessage "index: " & k.index & " // time: " & k.time & " // value: " & k.value
	next
if err <> 0 then
	logmessage "no Y position keys"
end if
on error goto 0

on error resume next
	logmessage "--------------------------------------------------"
	logmessage "Z position keys: " & selection(0).posz.Source.Keys.count
	for each k in selection(0).posz.Source.Keys
		logmessage "index: " & k.index & " // time: " & k.time & " // value: " & k.value
	next
if err <> 0 then
	logmessage "no Z position keys"
end if
on error goto 0


' output example (0 rot keys, 2 pos keys):

' INFO : --------------------------------------------------
' INFO : no X rotation keys
' INFO : --------------------------------------------------
' INFO : no Y rotation keys
' INFO : --------------------------------------------------
' INFO : no Z rotation keys
' INFO : --------------------------------------------------
' INFO : X position keys: 2
' INFO : index: 0 // time: 2 // value: 5,14534318031942
' INFO : index: 1 // time: 6 // value: 8,2411504340802
' INFO : --------------------------------------------------
' INFO : Y position keys: 2
' INFO : index: 0 // time: 2 // value: 0,365325291829147
' INFO : index: 1 // time: 6 // value: 1,11923927115289
' INFO : --------------------------------------------------
' INFO : Z position keys: 2
' INFO : index: 0 // time: 2 // value: 1,96103417177471
' INFO : index: 1 // time: 6 // value: 1,88564277384233

' [8] message box

msgbox "message", , "title"

' [9] input box

logmessage inputbox ("message", "title" , "pre-entered content")

' [10] getting the desktop path

' this can be useful for default locations like when selecting a folder
DesktopPath = CreateObject("WScript.Shell").SpecialFolders("Desktop")
logmessage DesktopPath

' [11] selecting a folder

' the default path is in this case my desktop
' to make it work on other systems, you would need the code of "getting the desktop path" section and replace my path with the DesktopPath
logmessage XSIUIToolkit.PickFolder("C:\Users\RMM\Desktop\", "title" )

' [12] selecting a file of a specific type

set oFileBrowser = XSIUIToolkit.FileBrowser
oFileBrowser.DialogTitle = "Select an image file (png/tga/jpg)" 
' (default folder)
oFileBrowser.InitialDirectory = "c:\"
oFileBrowser.Filter = "JPEG (*.jpg)|*.jpg|PNG (*.png)|*.png| Targa (*.tga)|*.tga||"
oFileBrowser.ShowOpen
If oFileBrowser.FilePathName <> "" Then
	logmessage "User selected " & oFileBrowser.FilePathName
Else
	logmessage "User pressed cancel"
End If

' [13] reading out environment variables

' some infos about env vars: (1), (2), (3)
' those variables are stored inside the setenv.bat, two disadvantages:
' adding or editing those vars appears to not work in vbs or I just did it wrong
' anyway, new vars can only be read out after app restart
' therefore let's concentrate on reading out existing ones and then how to create our own via txt files (example: https://dl.dropbox.com/u/139715/OniGalore/ModToolScript/Oni_env_vars.txt Oni_env_vars.txt (dead link))
' code for reading out:
logmessage XSIUtils.ResolvePath("$SI_HOME/")

' [14] check if file exist

Set objFSO = CreateObject("Scripting.FileSystemObject")
If objFSO.FileExists ("C:\folder\file.txt") then
	logmessage "File exists."
else
	logmessage "File doesn't exist."
end if

' [15] check if folder exist + create folder

dim strDirectory
strDirectory = "C:\test"

Set objFSO = CreateObject("Scripting.FileSystemObject")
If objFSO.FolderExists(strDirectory) Then
   Set objFolder = objFSO.GetFolder(strDirectory)
   logmessage strDirectory & " already exists"
Else
   Set objFolder = objFSO.CreateFolder(strDirectory)
   logmessage "created folder " & strDirectory
End If

' ### or simply:
dir = "C:\test"
XSIUtils.EnsureFolderExists (dir)

' [16] write xml file

FolderName = CreateObject("WScript.Shell").SpecialFolders("Desktop")
FileName = "test"
FilePath = FolderName & "\OBAN" & FileName & ".xml"

Set oFS = CreateObject("Scripting.FileSystemObject")
Set objXMLFile = oFS.OpenTextFile(FilePath, 2, True, 0)

' quote sign in a string needs two quote signs
objXMLFile.WriteLine "<?xml version=""1.0"" encoding=""utf-8""?>"
objXMLFile.WriteLine "<Oni>"
objXMLFile.WriteLine "..."
objXMLFile.Close

' [17] read xml file

Set xmlDoc = CreateObject( "Microsoft.XMLDOM" )
xmlDoc.Async = "False"
path = "C:\Users\RRM\Oni\AE\AEInstaller\vanilla\level19_Final\BINACJBOWeapon.xml"
xmlDoc.Load( path )

Set colPosition = xmlDoc.selectNodes( "Oni/Objects/WEAP/Header/Position" )
Set colRotation = xmlDoc.selectNodes( "Oni/Objects/WEAP/Header/Rotation" )
Set colClass =    xmlDoc.selectNodes( "Oni/Objects/WEAP/OSD/Class" )

loop_count = xmlDoc.selectNodes( "Oni/Objects/WEAP").length

logmessage "found " & loop_count & " weapons:"
logmessage "================"
for i=0 to loop_count - 1

	'split string into pices as array, space is used as seperator by default
	'element 0 = X; element 1 = Y; element 2 = Z
	pos = split(colPosition.item(i).text)
	rot = split(colRotation.item(i).text)
	
	' Mod Tool wants comma instead of point for decimal seperator
	pos(0) = replace (pos(0), ".", ",")
	pos(1) = replace (pos(1), ".", ",")
	pos(2) = replace (pos(2), ".", ",")
	
	rot(0) = replace (rot(0), ".", ",")
	rot(1) = replace (rot(1), ".", ",")
	rot(2) = replace (rot(2), ".", ",")

	logmessage colClass.item(i).text
	logmessage pos(0) & " " & pos(1) & " " & pos(2)
	logmessage rot(0) & " " & rot(1) & " " & rot(2)
	logmessage "----------------"
next


' INFO : found 2 weapons:
' INFO : ================
' INFO : w5_sbg
' INFO : 23,16747 84,8193359 757,1958
' INFO : 0 0 0
' INFO : ----------------
' INFO : w4_psm
' INFO : 18,1105652 84,8193359 749,121
' INFO : 0 0 0
' INFO : ----------------

' [18] read xml file (attribute/content-based)

Set xmlDoc = CreateObject( "Microsoft.XMLDOM" )

' tells the program to wait until the file was loaded conpletely
xmlDoc.Async = "False"
xmlDoc.Load( "C:\Users\RRM\Oni\AE\AEInstaller\vanilla\level0_Final\BINAEINOimpact_effects.xml" )


' example 1 (we use this one)
' nodes only with a certain attribute and conent will be collected

' content-based search: node [child_node = 'content']
' attribute-based search: node [@attribute_name = 'attribute_value']

' if things get too long an underscore _ can be used to make a linebreak
set w1_tap = xmlDoc.selectNodes _
	( "Oni/ImpactEffects/Impact[@Name = 'w1_tap']/Material[@Name = 'Unbreak_Glass']/ImpactEffect [Component = 'Damage']" )


' example 2
' use "or" for a search of various material
'set w1_tap = xmlDoc.selectNodes _
'	( "Oni/ImpactEffects/Impact/Material[@Name = 'Default' or @Name = 'Character']/ImpactEffect" )


' example 3
' use (|) for a search of various content, e.g. <ImpactEffect><Modifier>Light plus <ImpactEffect><Modifier>Medium
'set w1_tap = xmlDoc.selectNodes _
'	( "Oni/ImpactEffects/Impact/Material/(ImpactEffect [Modifier = 'Light'] | ImpactEffect [Modifier = 'Medium'])" )



for each element in w1_tap
	logmessage "Impact: " & element.parentNode.parentNode.getAttribute("Name")
	logmessage "Material: " & element.parentNode.getAttribute("Name")
	
	' outputs "tag name: tag content"
	logmessage element.childNodes(0).nodename & ": " & element.childNodes(0).text
	logmessage element.childNodes(1).nodename & ": " & element.childNodes(1).text
	logmessage "-----------------------------------"
	
	'check for sounds
	if element.childNodes(2).childNodes.length = 0 then
		logmessage "sound not present"
	else
		logmessage "sound is present"
		logmessage "-----------------------------------"
		logmessage element.childNodes(2).childNodes(0).nodename & ": " & element.childNodes(2).childNodes(0).text
		logmessage element.childNodes(2).childNodes(1).nodename & ": " & element.childNodes(2).childNodes(1).text
		logmessage element.childNodes(2).childNodes(2).nodename & ": " & element.childNodes(2).childNodes(2).text
		logmessage element.childNodes(2).childNodes(3).nodename & ": " & element.childNodes(2).childNodes(3).text
	end if
	logmessage "-----------------------------------"

	' check for particle
	if element.childNodes(3).childNodes.length = 0 then
 		logmessage "no particle present"
	else
		logmessage "number of particle: " & element.childNodes(3).childNodes.length
		for each particle_section in element.childNodes(3).childNodes
			logmessage "-----------------------------------"
			for each particle_tag in particle_section.childnodes
				logmessage particle_tag.nodename & ": " & particle_tag.text
			next		
		next	
	end if
	logmessage "==================================="
next


' INFO : Impact: w1_tap
' INFO : Material: Unbreak_Glass
' INFO : Component: Damage
' INFO : Modifier: Any
' INFO : -----------------------------------
' INFO : sound not present
' INFO : -----------------------------------
' INFO : number of particle: 2
' INFO : -----------------------------------
' INFO : Name: d__GLASSCRACK
' INFO : Orientation: 0
' INFO : Location: 4
' INFO : Decal1: false
' INFO : Decal2: true
' INFO : -----------------------------------
' INFO : Name: w1_tap_x03
' INFO : Orientation: 0
' INFO : Location: 1
' INFO : Offset: -1
' INFO : ===================================

' [] remove xml nodes

Set objXMLDoc = CreateObject("Microsoft.XMLDOM") 
objXMLDoc.async = False 

Dim XMLFile
XMLFile = "C:\Softimage\Softimage_Mod_Tool_7.5\OniLevels\ONLV\test\ONLVAirport.xml"
objXMLDoc.load(XMLFile) 
Set nodes = objXMLDoc.selectNodes("Oni/CRSA/*")
For Each node In nodes
    node.parentNode.removeChild(node)
Next

objXMLDoc.Save(XMLFile)

' [19] create txt file + write lines

txt_location = "C:\Softimage\Softimage_Mod_Tool_7.5\test.txt"
Set fso = CreateObject ("Scripting.FileSystemObject")
Set wText = fso.CreateTextFile (txt_location, 1)
wText.WriteLine "I'm a test file."
wText.WriteLine "Yo!"
wText.Close

' [20] read txt file

Set objFileToRead = CreateObject("Scripting.FileSystemObject").OpenTextFile("C:\Softimage\Softimage_Mod_Tool_7.5\test.txt", 1)

do while not objFileToRead.AtEndOfStream
    strLine = objFileToRead.ReadLine()
    logmessage strLine
loop
' INFO : I'm a test file.
' INFO : Yo!

objFileToRead.Close
Set objFileToRead = Nothing

' [21] check onisplit version

Set objFSO = CreateObject("Scripting.FileSystemObject")
logmessage objFSO.GetFileVersion("F:\Program Files (x86)\Oni\Edition\install\onisplit.exe")

' result looks like this:
' INFO : 0.9.59.0

' [22] call CMD, e.g. to lunch onisplit or the game

' relative path

' the "GameDataFolder" isn't inside the "install" folder
' so we will use ..\ to go one folder backwards

' additional quote signs tells the program where the 
' paths strings start and end in case the path contains spaces

' if you are going to use the xml file right after its extraction (which is likely)
' then the "/wait" argument inside the onisplit_action string is important
' without it the code would continue and might try to read the not existing xml file and produce an error

onisplit_location = "F:\Program Files (x86)\Oni\Edition\install"
input_folder = """..\GameDataFolder\level19_Final\ONLVcompound.oni"""
output_folder = """..\GameDataFolder"""
onisplit_action = "cmd /C start /wait OniSplit.exe -extract:xml " & output_folder & " " & input_folder
logmessage "relative path: " & onisplit_action
' expected logmessage:
' INFO : relative path: cmd /C start OniSplit.exe -extract:xml "..\GameDataFolder" "..\GameDataFolder\level19_Final\ONLVcompound.oni"
XSIUtils.LaunchProcess onisplit_action, 1, onisplit_location


' absolute path

'adapt paths so it works on your computer
onisplit_location = "F:\Program Files (x86)\Oni\Edition\install"
input_folder = """F:\Program Files (x86)\Oni\Edition\GameDataFolder\level19_Final\ONLVcompound.oni"""
output_folder = """F:\Program Files (x86)\Oni\Edition\GameDataFolder"""
onisplit_action = "cmd /C start /wait OniSplit.exe -extract:xml " & output_folder & " " & input_folder
logmessage "absolute path: " & onisplit_action
' expected logmessage:
' INFO : absolute path: cmd /C start OniSplit.exe -extract:xml "F:\Program Files (x86)\Oni\Edition\GameDataFolder" "F:\Program Files (x86)\Oni\Edition\GameDataFolder\level19_Final\ONLVcompound.oni"
XSIUtils.LaunchProcess onisplit_action, 1, onisplit_location


' you can also lunch bat files

onibat = "cmd /C start run_wind.bat"
onilocation = "F:\Program Files (x86)\Oni\Edition"
XSIUtils.LaunchProcess onibat, 0, onilocation

' alternative to cmd: call onisplit via winmgmts

' slightly modified code from that site
' logmessage "onisplit finished." will be executed after the conversion finished, there should be also an delay of 3 seconds to support very slow computers 
' if you are going to use this method consider to extent the code to check if input file and output directory exist
osp_loca = "C:\OniAE\Edition\install\OniSplit.exe"
osp_action = "-extract:xml"
osp_output = """C:\OniAE\Edition\GameDataFolder"""
osp_input = """C:\OniAE\Edition\GameDataFolder\level1_Final\AKEVEnvWarehouse.oni"""
osp_total = osp_loca & " " & osp_action & " " & osp_output & " " & osp_input
logmessage osp_total

strComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2:Win32_Process")
objWMIService.Create osp_total, null, null, intProcessID
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")

' wait 3 second to find event - should be enough time for single actions on a slow computer
Set colMonitoredProcesses = objWMIService.ExecNotificationQuery _
    ("Select * From __InstanceDeletionEvent Within 3 Where TargetInstance ISA 'Win32_Process'")

Do Until i = 1
    Set objLatestProcess = colMonitoredProcesses.NextEvent
    If objLatestProcess.TargetInstance.ProcessID = intProcessID Then
        i = 1
    End If
Loop
logmessage "onisplit finished."
' now you can work with the extracted xml file

File:XSI Mod Tool PPG.PNG

' [23] building a form (PPG)

dim oPSet, oPPGLayout, oItem, PPG_exist

' set check value to 0
PPG_exist = 0

' check if PPG exists
for each prop in ActiveProject.ActiveScene.Root.Properties
	logmessage prop.name
	if instr(1, prop.name, "my_new_PPG") > 0 then
		PPG_exist = 1
		logmessage "found " & """" & prop.name & """"
	end if
next

' create PPG if it doesn't exist
if PPG_exist = 0 then
	set oPSet = ActiveSceneRoot.AddProperty("CustomProperty", false, "my_new_PPG")
	set oPPGLayout = oPSet.PPGLayout
	
	' setup PPG parameters
	' ###################################################################################
	' create checkbox and remove key symboles by setting parameter "Animatable" to false
	oPSet.AddParameter3 "Check1", siBool, 0, , , false
	oPSet.AddParameter3 "Check2", siBool, 0, , , false
	oPSet.AddParameter3 "Check3", siBool, 1, , , false
	oPSet.AddParameter3 "Check4", siBool, 1, , , false
	oPSet.AddParameter3 "text1", siString
	' last parameter of "int1" is set to ReadOnly
	oPSet.AddParameter3 "int1", siInt2, , , , false, 1 
	oPSet.AddParameter3 "int2", siInt2, , , , false, 0
	
	' add PPG items
	' ###################################################################################
	oPPGLayout.AddItem "text1", "Hi there!"
	oPPGLayout.AddItem "int1", "number 1"
	oPPGLayout.AddItem "int2", "number 2"
	oPPGLayout.AddGroup "4 checkboxes", true
	oPPGLayout.AddRow
		oPPGLayout.AddItem "Check1", "C1"
		oPPGLayout.AddItem "Check3", "C3"
	oPPGLayout.EndRow
	oPPGLayout.AddRow
		oPPGLayout.AddItem "Check2", "C2"
		oPPGLayout.AddItem "Check4", "C4"
	oPPGLayout.EndRow
	oPPGLayout.EndGroup
	
	oPPGLayout.AddButton("log_values", "log PPG values").setAttribute siUICX, 120
	
	oPPGLayout.Logic = "sub log_values_OnClicked" & vbCrlf & _
	"		logmessage ""text 1 = "" & getvalue(""my_new_PPG.text1"")" & vbCrlf & _
	"		logmessage ""number 1 = "" & getvalue(""my_new_PPG.int1"")" & vbCrlf & _
	"		logmessage ""C1 = "" & getvalue(""my_new_PPG.Check1"")" & vbCrlf & _
	"	end sub"
	
	oPPGLayout.Language = "VBScript" 'Optional because this is the default

	' open PPG
	InspectObj oPSet		
else
	' open that PPG if it already exist
	InspectObj "my_new_PPG"
end if

' set values from outside the PPG
setvalue "my_new_PPG.text1", "any text could stand here"
setvalue "my_new_PPG.int1", "42"
setvalue "my_new_PPG.check1", true

' get values from outside the PPG
logmessage getvalue("my_new_PPG.text1")
logmessage getvalue("my_new_PPG.int1")
logmessage getvalue("my_new_PPG.check1")

File:XSI Mod Tool UserDataBlob.PNG

' [24] UserDataBlob

' you can attach data to objects, e.g. new properties for the scene root or Oni Trigger Volumes
' the so-called "UserDataBlob" can't be saved in *.dae, so save the whole scene to keep your progress

' check if my property exist
found_my_prop = 0
set oProps = ActiveProject.ActiveScene.Root
logmessage "root name: " & ActiveProject.ActiveScene.Root
for each prop in oProps.Properties
	' remove apostroph in line beneath to log all root properties
 	'LogMessage prop.Name
	if instr(1, prop.Name, "my_prop") = 1 then
		found_my_prop = 1
	end if
next

' prop doesn't exist, create it
if found_my_prop = 0 then
	' create property (must also have content, in this case "yes")
	oProps.AddProperty( "UserDataBlob", , "my_prop" ).value = "yes"
	logmessage "created my new prop"
end if

' prop exists, change/read its value
if found_my_prop = 1 then
	' change property
	oProps.Properties( "my_prop" ).value = "no"

	' read property
	logmessage oProps.Properties( "my_prop" ).value
	' if you want to read a property from another script be sure that it was already created
	' reuse code under "check if my property exist"
end if

' [25] getting the position of points (with selection mode point)

' a point must be selected
' gets xyz position of first selected point of the first selected object
logmessage Selection(0).SubComponent.ComponentCollection(0).position.x
logmessage Selection(0).SubComponent.ComponentCollection(0).position.y
logmessage Selection(0).SubComponent.ComponentCollection(0).position.z

' [26] getting the position of points (with selection mode object)

' an object must be selected
' gets xyz position of point 0 of the first selected object
logmessage selection(0).activeprimitive.geometry.Points(0).Position.x
logmessage selection(0).activeprimitive.geometry.Points(0).Position.y
logmessage selection(0).activeprimitive.geometry.Points(0).Position.z

' [27] getting and setting the position of points (without selection) right after object creation

' point positions are relative to the object's center
' to get the absolute point positions add center to point
' to set the absolute point positions subtract center from point

set oRoot = application.activeproject.activescene.root
set oObj = oRoot.addgeometry( "Cube", "MeshSurface", "test" )

' to test our code move center to somewhere else
Translate oObj, 9, 11, 13, siRelative, siGlobal, siCtr, siXYZ, , , , , , , , , , 0
SaveKey oObj & ".kine.local.posx," & oObj & ".kine.local.posy," & oObj & ".kine.local.posz", 1, , , , True

FreezeObj oObj
set oGeometry = oObj.activeprimitive.geometry
aPositions = oGeometry.Points.PositionArray
' get old position
'                                         (xyz, point)
logmessage "old point 0 posx: " & aPositions(0, 0) + GetValue(oObj & ".kine.global.posx")
logmessage "old point 0 posy: " & aPositions(1, 0) + GetValue(oObj & ".kine.global.posy")
logmessage "old point 0 posz: " & aPositions(2, 0) + GetValue(oObj & ".kine.global.posz")

' set new position
aPositions(0, 0) = -7 - GetValue(oObj & ".kine.global.posx")
aPositions(1, 0) = -7 - GetValue(oObj & ".kine.global.posy")
aPositions(2, 0) = -7 - GetValue(oObj & ".kine.global.posz")

' update the array
oGeometry.Points.PositionArray = aPositions
' get new position
logmessage "new point 0 posx: " & aPositions(0, 0) + GetValue(oObj & ".kine.global.posx")
logmessage "new point 0 posy: " & aPositions(1, 0) + GetValue(oObj & ".kine.global.posy")
logmessage "new point 0 posz: " & aPositions(2, 0) + GetValue(oObj & ".kine.global.posz")

' INFO : old point 0 posx: -4
' INFO : old point 0 posy: -4
' INFO : old point 0 posz: -4

' INFO : new point 0 posx: -7
' INFO : new point 0 posy: -7
' INFO : new point 0 posz: -7

' [28] getting the scaling, rotation and position of selected objects

logmessage "mesh name: " & selection(0)
logmessage selection(0).sclx.value
logmessage selection(0).scly.value
logmessage selection(0).sclz.value
logmessage selection(0).rotx.value
logmessage selection(0).roty.value
logmessage selection(0).rotz.value
logmessage selection(0).posx.value
logmessage selection(0).posy.value
logmessage selection(0).posz.value

' [29] getting the scaling, rotation, and position of not selected objects

' GetValue("NAME.kine.global.rotx")
' NAME must be the exact mesh name
' let's say you want the data of one character's pelvis
logmessage GetValue("pelvis.kine.global.sclx")
logmessage GetValue("pelvis.kine.global.scly")
logmessage GetValue("pelvis.kine.global.sclz")
logmessage GetValue("pelvis.kine.global.rotx")
logmessage GetValue("pelvis.kine.global.roty")
logmessage GetValue("pelvis.kine.global.rotz")
logmessage GetValue("pelvis.kine.global.posx")
logmessage GetValue("pelvis.kine.global.posy")
logmessage GetValue("pelvis.kine.global.posz")

' [30] decrypting merged integer flags

' for example the BINACJBOTrigger Volume.xml file has flags as strings for the <Flags> tag
' and integer values for the <Teams> tag whereby the values are merged to one value
' so if <Teams> tag holds "101" we have to think what flags it holds, the flags can be broken down with following code

' x: hypothetical value of <Teams>
x=101
' 101 = 64 + 32 + 4 + 1

x_255
sub x_255
	if x > 255 then
		msgbox "Flags bigger than 255 are not allowed.", ,"error"
		exit sub
	end if
	if x >= 128 and x <= 255 then
		logmessage "128"
		x = x - 128
	end if
	if x >= 64 and x < 128 then
		logmessage "64"
		x = x - 64
	end if
	if x >= 32 and x < 64 then
		logmessage "32"
		x = x - 32
	end if
	if x >= 16 and x < 32 then
		logmessage "16"
		x = x - 16
	end if
	if x >= 8 and x < 16 then
		logmessage "8"
		x = x - 8
	end if
	if x >= 4 and x < 8 then
		logmessage "4"
		x = x - 4
	end if
	if x >= 2 and x < 4 then
		logmessage "2"
		x = x - 2
	end if
	if x = 2 then
		logmessage "2"
		x = x - 2
	end if
	if x = 1 then
		logmessage "1"
		x = x - 1
	end if
	if x = 0 then
		logmessage "finished check"
	end if
end sub

' INFO : 64
' INFO : 32
' INFO : 4
' INFO : 1
' INFO : finished check

' [31] disabling PPG popups

' for example if code of a script button creates numerous objects in one go, the same number of property pages (PPG) can appear
' for user convenience those PPG popups can be disabled

' disable PPG popup
Preferences.SetPreferenceValue "Interaction.autoinspect", false

' creates the cube mesh but no PPG will show up
CreatePrim "Cube", "MeshSurface"

' enable PPG popup again
Preferences.SetPreferenceValue "Interaction.autoinspect", true

' [32] disabling logmessages

' msglogverbos is probably already set to false by default
' could be set at the start of a final script to increase performance
setvalue "preferences.scripting.msglogverbose", false
setvalue "preferences.scripting.msglog", false

' [33] getting bounding box values

' this could be useful to create a bounding box for OFGA files

' let's get the bounding box of a simple cylinder
' the output values will be absolute positions
CreatePrim "Cylinder", "MeshSurface"

dim xmin, ymin, zmin, xmax, ymax, zmax
dim list
'if you use SelectionList the objects will be treated as one single object
'set list = GetValue( "SelectionList" )
set list = GetValue( selection(0) )
GetBBox list, TRUE, xmin, ymin, zmin, xmax, ymax, zmax
LogMessage "Lower Bound: " & xmin & " / " & ymin & " / " & zmin
LogMessage "Upper Bound: " & xmax & " / " & ymax & " / " & zmax

' expected output:
' INFO : Lower Bound: -1 / -2 / -1
' INFO : Upper Bound: 1 / 2 / 1

' [34] open an explorer window

' this could be used open an output folder ...
strPath = "explorer.exe /e," & XSIUtils.ResolvePath("$SI_HOME/")
Set objShell = CreateObject("Wscript.Shell")
objShell.Run strPath

' to select a generated file inside the folder:
strPath = "explorer.exe /select," & "C:\folder\test.txt"

SelectNeighborObj obj 5

' [35] working with hierarchies 

' let's be sure we have an object selected
if selection.count > 0 and typename(selection(0)) = "X3DObject" then
 
	' the object itself
	logmessage selection(0)
	
	
	' the parent object
	logmessage selection(0).parent
	
	
	' the children
	for each n in selection(0).FindChildren( , , , 0 )
		logmessage n
	next
	' the 4the parameter of FindChildren can be set to 0 or 1
	' with 0 you get all direct children
	' with 1 you get everything located under that object no matter how deep the level


	' count all objects
	logmessage "children: " & selection(0).FindChildren( , , , 1).count
	' caution: if the 3rd parameter is set to siMeshFamily
	' then the selected object will be also counted

	' find the root object of the hierarchy, any object could be selected
	SelectNeighborObj selection(0), 4


	' go through the hierarchy in different directions
	' SelectNeighborObj [parameter1], [parameter2], [parameter3], [parameter4]
	' options of the second parameters
	' 0 go one level up
	' 1 go one level down
	' 2 go to next silbing
	' 3 go to previous silbing
	' 4 go to highest level
	' 5 go to deepest level of current selected obj
	' 5: if there are more than one children, the path goes always for the first (left) child (see image)


	' select the hierarchy as a whole 
	SelectObj "left_thigh", "TREE", true
	' first parameter could be any object of the hierarchy
	' after using this the selection of an Oni character will be "B:pelvis"
else
	msgbox "no object was selected"	
end if

[36] drag and drop support for specific oni files

function XSILoadPlugin( in_reg )
	in_reg.Author = ""
	in_reg.Name = "Oni drag and drop support"
	in_reg.Email = ""
	in_reg.URL = ""
	in_reg.Major = 1
	in_reg.Minor = 0

	in_reg.RegisterEvent "support_oni_DnD",siOnDragAndDrop
 	'RegistrationInsertionPoint - do not remove this line

	XSILoadPlugin = true
end function

function XSIUnloadPlugin( in_reg )
	dim strPluginName
	strPluginName = in_reg.Name
	Application.LogMessage strPluginName & " has been unloaded.",siVerbose
	XSIUnloadPlugin = true
end function

function support_oni_DnD_OnEvent( in_ctxt )
	Set objFSO = CreateObject("Scripting.FileSystemObject")

	FullFilePath = in_ctxt.GetAttribute("DragSource")
 	FileExt = objFSO.GetExtensionName(FullFilePath)
	FileName = objFSO.GetBaseName(FullFilePath)

 	if instr(LCase(FileExt), "oni") = 1 then
 		in_ctxt.SetAttribute "DragSourceSupported", true
 
 		' next line prevents the code from being repeated
	 	if in_ctxt.GetAttribute("DragAndDropAction") = 1 then

			logmessage "What I'm supposed to do with that oni?"
			' do more stuff here
			' ..................
			' e.g. telling onisplit to extract the oni

		end if
	end if

	support_oni_DnD_OnEvent = true
end function

Important:

Mod Tool has its own drag and drop event handler for dae and xml file.

If we succeed in modifying and shipping that new file, we could finally trigger scripts with those files and process them.

The original file can be found at:

logmessage XSIUtils.ResolvePath("$XSI_HOME/") & "Application\DSScripts\Model.vbs"
' C:\Softimage\Softimage_Mod_Tool_7.5\Application\DSScripts\Model.vbs

A backup of the original file can be found here: https://dl.dropboxusercontent.com/u/139715/OniGalore/ModToolScript/Model.vbs (dead link)

There are two issues that can be fixed by modifying this file.

import of xml files created by onisplit
import of dae and xml files with relative path from a html page

Relative file pathes will be transformed to absolute pathes whereby an unwanted "file:///" is added.

A solution to is to transform the path again.

if instr(in_Filename,"file:///") = 1 then
	in_Filename = replace(in_Filename, "file:///", "")
end if

Following function is always triggered, so we will modify it.

sub ImportDotXSIProc( in_Filename, in_Parent )
	if instr(in_Filename,"file:///") = 1 then
		in_Filename = replace(in_Filename, "file:///", "")
	end if
	Set objFSO = CreateObject("Scripting.FileSystem<Object")
	FileExt = objFSO.GetExtensionName(in_Filename)

	if application.license = "Avid 3D" then
		SIImportDotXSIFile in_Filename, in_Parent
	else
		Set oFS = CreateObject("Scripting.FileSystemObject") 
		if oFS.FileExists(in_Filename) = True then
			if FileExt = "xml" then
				' is this an Oni xml file ?
		 		Set xmlDoc = CreateObject("Microsoft.XMLDOM")
				xmlDoc.Async = "False"
				xmlDoc.Load(in_Filename)
				if xmlDoc.selectNodes("Oni").length > 0 then
					logmessage "Oni xml file detected"
					read_xml "OFGA", in_Filename
				end if
				exit sub
			end if

The lines in red has been added.

[37] dae export

set oProps = ActiveProject.ActiveScene.Root.Properties
if typename (oProps.find("ExportCrosswalkOptions")) = "Nothing" then
	logmessage "Export settings not set"
	CreateExportCrosswalkOptions , "ExportCrosswalkOptions"
else
	logmessage "Export settings present"
end if

' sets the extension to dae
SetValue "ExportCrosswalkOptions.Format", 1
' set export path and file name
SetValue "ExportCrosswalkOptions.Filename", CreateObject("WScript.Shell").SpecialFolders("Desktop") & "\export_test.dae"
' selection only
SetValue "ExportCrosswalkOptions.ExportSelectionOnly", True
' export
ExportCrosswalk "ExportCrosswalkOptions"

[38] fbx export

FBXExportLights (false)
FBXExportSelection (true)
' mark FBXExport and hit F1 to get more options
FBXExport (CreateObject("WScript.Shell").SpecialFolders("Desktop") & "\export_test.fbx" )

[39] import an image clip only once

image_path =  "C:\Users\RRM\Desktop\white_512_512.tga"

Set FSO = CreateObject("Scripting.FileSystemObject")
image_clip = FSO.GetBaseName(image_path) & "_" & FSO.GetExtensionName(image_path)
logmessage image_clip

if not typename(ActiveProject.ActiveScene.ImageClips(image_clip)) = "Nothing" then
	logmessage "found image clip"
else
	logmessage "image clip not yet present, going to import ..."
	
	SICreateImageClip image_path
 	' or as script object:
	'set oImage = AddImageSource (image_path)
	'set oImageClip = AddImageClip (oImage)
end if

[40] layers

how to access scene layers

To access scene layers switch from Main Control Panel (MCP) to Keying Panel/Layers (KP/L) and then click "Scene".

After the user became used to layers, they can help to organize work in a scene. This is especially interesting for some scripting tasks like getting TRGV/FURN data for xml files.

' get current layer
GetCurrentLayer CurrentLayer
logmessage CurrentLayer

' create a new layer named "FurnLayer" if it doesn't already exist
' make new layer the current layer
if typename(ActiveProject.ActiveScene.Layers("FurnLayer")) = "Nothing" then
	SICreateLayer , "FurnLayer", FurnLayer
	SetCurrentLayer FurnLayer
else
	SetCurrentLayer "Layers.FurnLayer"
end if

' get objects in FurnLayer and count objects
' exit sub if there are no objects
SelectMembers "Layers.FurnLayer"
if selection.count = 0 then
	MsgBox "No OFGA data found to export.", , "Export canceled"
	exit sub
end if

' if there are Furn objects
for each obj in selection
	' do something e.g. create xml
next

' [41] onisplit update

' this downloads and unzips the last attachment from the onisplit page
output_dir = "F:\test\"

' get onisplit link ################################################
set xmlhttp = createobject ("msxml2.xmlhttp.3.0")
xmlhttp.open "get", "http://mods.oni2.net/node/38/index.html", false
xmlhttp.send

webtext = xmlhttp.responseText
 webtext = replace(replace(webtext, vbcr,""),vblf,"")
 webtext = split(webtext, "<table class=""sticky-enabled""> <thead><tr><th>Attachment</th>" )(1)
 webtext = split(webtext, "</td> </tr></tbody></table>") (0)

link_start = instrrev(webtext, "http")
link_end = instrrev(webtext, ".zip"" type") + 4 ' + zip
' mid (text, begin, length)
link = mid(webtext, link_start, link_end - link_start)
logmessage "last link in attachment: " & link

dim xHttp: Set xHttp = createobject("Microsoft.XMLHTTP")
dim bStrm: Set bStrm = createobject("Adodb.Stream")
xHttp.Open "GET", link, False
xHttp.Send

' get file name ###################################################
hdr = xHttp.getResponseHeader("Content-Disposition")
hdr = replace (hdr, "attachment; filename=""", "")
hdr = replace (hdr, """", "")
logmessage hdr

' save file #######################################################
filename = output_dir & hdr
with bStrm
	.type = 1 '//binary
	.open
	.write xHttp.responseBody
	.savetofile filename, 2 '//overwrite
end with

' extract file ####################################################

UnzipFile filename, output_dir

Function UnzipFile(ZipFile, ExtractTo)
	Set fso = CreateObject("Scripting.FileSystemObject")
	If NOT fso.FolderExists(ExtractTo) Then
		fso.CreateFolder(ExtractTo)
	End If
	set objShell = CreateObject("Shell.Application")
	set FilesInZip=objShell.NameSpace(ZipFile).items
	objShell.NameSpace(ExtractTo).CopyHere(FilesInZip)
	Set fso = Nothing
	Set objShell = Nothing
End Function

' [42] get vertex color

set oGeometry = selection(0).activeprimitive.geometry
set oTriangles = oGeometry.Triangles

for each oTriangle in oTriangles
   logmessage oTriangle.Name 

   for each oVertex in oTriangle.Points
       set oColor = oVertex.Color
       logmessage vbTab & "RGBA(" & _
          oColor.red & "," & _
          oColor.green & "," & _
          oColor.blue & "," & _
          oColor.alpha & ")"
   next
next

' [43] get all used textures

DeleteAllUnusedMaterials
DeleteUnusedImageClips
'DeleteUnusedImageSources
for each i in Application.ActiveProject.ActiveScene.ExternalFiles
	if i.filetype = "Pictures" then
		logmessage i
	end if
next

'  [44] get global point position

set oObj = selection(0)
set oTrans = oObj.Kinematics.Local.Transform 
set oPoint0 = oObj.ActivePrimitive.Geometry.Points(0)
set oPoint7 = oObj.ActivePrimitive.Geometry.Points(7)
set oPos0 = oPoint0.Position
set oPos7 = oPoint7.Position

' scaling must be frozen to 1 before we can calculate the size from local values
ResetTransform selection(0), siCtr, siScl, siXYZ

logmessage "local p0: "& oPos0.X & " " & oPos0.Y & " " & oPos0.Z
set oGlobalPos0 = XSIMath.MapObjectPositionToWorldSpace( oTrans, oPos0)
logmessage "global p0: "& oGlobalPos0.X & " " & oGlobalPos0.Y & " " & oGlobalPos0.Z

logmessage "local p7: "& oPos7.X & " " & oPos7.Y & " " & oPos7.Z
set oGlobalPos7 = XSIMath.MapObjectPositionToWorldSpace( oTrans, oPos7)
logmessage "global p7: "& oGlobalPos7.X & " " & oGlobalPos7.Y & " " & oGlobalPos7.Z
 
logmessage "size: " &		oPos7.X - oPos0.X & " " & _
							oPos7.Y - oPos0.Y & " " & _
							oPos7.Z - oPos0.Z
' with a rotation of: -3,8792 16,4039 -13,5017
' INFO : local p0: -4 -4 -4
' INFO : local p7: 4 4 4
' INFO : global p0: -5,74764582364017 -3,00250371537919 -2,43916767056426 ' TRGV start point
' INFO : global p7: 5,74764582364017 3,00250371537919 2,43916767056426
' INFO : size: 8 8 8

Interactive Creative Environment (ICE)

ICE

tutorials:

http://www.youtube.com/watch?v=ioMQ2rBVO4g
http://dot3d.blogspot.com/2009/10/softimage-ice-tree-building-step-by.html
an ICE tutorial thread
ICE trees Debugging
https://support.solidangle.com/display/SItoAUG/ICE (dead link)

@@ Line 467: / Line 467: @@
 * '''[http://web.archive.org/web/20170616035120/http://softimage.wiki.softimage.com/sdkdocs/scriptsdb/scriptsdb/scrdb_vbscript.htm many vbscript examples]'''
 * '''[https://ss64.com/vb/ vbs commands]'''
-* [http://www.activexperts.com/activmonitor/windowsmanagement/adminscripts/filesfolders/files/ objFSO/objWSHShell: Scripts to manage Files] (replace "Wscript.Echo" with "logmessage")
+* [https://www.activexperts.com/activmonitor/windowsmanagement/adminscripts/filesfolders/files/ objFSO/objWSHShell: Scripts to manage Files] (replace "Wscript.Echo" with "logmessage")
 * [https://web.archive.org/web/20150504221146/http://activexperts.com/activmonitor/windowsmanagement/adminscripts/other/textfiles/ objFSO/objWSHShell: Scripts to manage Text Files]
 * [http://web.archive.org/web/20080905102848/http://www.kxcad.net/softimage_xsi/Softimage_XSI_Documentation/script_basics_IncludingExternalScripts.htm using external scripts]

Mod Tool: Difference between revisions

Revision as of 02:40, 7 February 2021

Contents

General information

Extensions

Selected wisdom

Visibility

Camera navigation

Mesh

Low poly modeling

Exchange meshes in hierarchies

Material and texture

Projection and UV

Rendering

Animating

Issues when saving and sharing animation files (.dae, .exp)

Animation mixer

Sounds

Scripting

Code pieces (VB Script)

Interactive Creative Environment (ICE)

Navigation menu

Mod Tool: Difference between revisions

Revision as of 02:40, 7 February 2021

General information

Extensions

Selected wisdom

Visibility

Camera navigation

Mesh

Low poly modeling

Exchange meshes in hierarchies

Material and texture

Projection and UV

Rendering

Animating

Issues when saving and sharing animation files (*.dae, *.exp)

Animation mixer

Sounds

Scripting

Code pieces (VB Script)

Interactive Creative Environment (ICE)

Navigation menu

Search

Issues when saving and sharing animation files (.dae, .exp)