XML:BINA/OBJC/TRIG

TRIG : Trigger spawn list	XML modding tips See HERE to start learning about XML modding. See HERE if you are searching for information on how to handle object coordinates. See HERE for some typical modding errors and their causes.
XML AKEV << Other file types >> CONS TMBD << Other BINA >> ONIE TRGV << Other OBJC >> TURR switch to OBD page

general information

• The xml code on this page was tested with onisplit v0.9.94.0
• BINACJBOTrigger.oni is level specific. (It can be found in AE/AEInstaller/vanilla/levelX_Final.dat)
• Extract this file if an update on xml tags is needed.

BSL support

command	description	example
marketing_line_off	turns the laser line off	marketing_line_off = 1
trig_activate trigger_id:int	activates a trigger	trig_activate 2
trig_deactivate trigger_id:int	deactivates a trigger	trig_deactivate 2
trig_hide trigger_id:int	hides a trigger, disables also laser	trig_hide 91
trig_show trigger_id:int	shows a trigger	trig_show 91
trig_speed trigger_id:int volume:float	sets a triggers speed	trig_speed 514 .15
trig_reset trigger_id:int	resets a trigger to non-triggered state	trig_reset 91

file structure

<?xml version="1.0" encoding="utf-8"?>
<Oni>
   <Objects>
       [...]
   </Objects>
</Oni>

[...] means at least one trigger. Paste all trigger data into there (this includes <TRIG Id="..."> and </TRIG> tag).

example

       <TRIG Id="8136">
           <Header>
               <Flags></Flags>
               <Position>-445 68 -1362</Position>
               <Rotation>270 8.65141646E-06 180.000015</Rotation>
           </Header>
           <OSD>
               <Class>trigger_long</Class>
               <TriggerId>1</TriggerId>
               <Flags>44</Flags>
               <LaserColor>0 0 255</LaserColor>
               <StartPosition>0</StartPosition>
               <Speed>0</Speed>
               <EmitterCount>3</EmitterCount>
               <Offset_0075>0</Offset_0075>
               <Offset_0077>0</Offset_0077>
               <Events>
                   <Script Function="calling_this_BSL_function" />
                   <ActivateTurret TargetId="1" />
                   <DeactivateTurret TargetId="2" />
                   <ActivateConsole TargetId="3" />
                   <DeactivateConsole TargetId="4" />
                   <ActivateAlarm TargetId="5" />
                   <DeactivateAlaram TargetId="6" />
                   <ActivateTrigger TargetId="7" />
                   <DeactivateTrigger TargetId="8" />
                   <LockDoor TargetId="9" />
                   <UnlockDoor TargetId="10" />
               </Events>
           </OSD>
       </TRIG>

tags

tag	type	description
<?xml version="1.0" encoding="utf-8"?>	float, flag	Don't change this.
<Oni>	-
<TRIG Id="...">	integer	You can also use <TRIG> without the id parameter.
<Header>	-
<Flags>	flag	Used in the past.
<Position>	float x3	trigger is spawned at this xyz-position
<Rotation>	float x3	trigger has this xyz-rotation (in degrees)
<OSD>	-
<Class>	char[63]	TRIGfile.oni This is a link to TRIG (trigger class), which holds the M3GM of the rail and links to TREG (laser emitter class) and OBAN (animation of the emitters)). original classes: trigger_arc trigger_circle trigger_evilbrain trigger_long trigger_long4x trigger_long4xzag trigger_rectangle trigger_sb3A trigger_sb3B trigger_short
<TriggerId>	int16	Used by BSL commands. Is it possible to use the same id for different triggers?
<Flags>	flags	InitialActive ReverseAnim PingPong
<LaserColor>	color	R G B range, e.g. <LaserColor>255 0 77</LaserColor>
<StartPosition>	float	start position of the trigger in the rail; range from 0 (bottom) to 1 (top) in connection to the spawn point of the trigger (spawn point = bottom)
<Speed>	float	This is one for two multiplier. The second multiplier can be accessed via BSL command trig_speed id speed. total_speed = OBAN_speed * multiplier_in_file * multiplier_BSL So if one of the multiplier is set to 0, the trigger will stop moving.
<EmitterCount>	int16	Number of emitter to spawn on the rail?
<TimeOn>	int16	laser is emitting its beam for X frames
<TimeOff>	int16	laser is not emitting its beam for X frames
<Events>	-	in16 array. You can use multiple events.
<Script Function="call_this_BSL_function" />	char[32]	Name of BSL function. For example if you use "call_this_BSL_function" here then write in BSL file: func call_this_BSL_function { dmsg "hi" }
<ActivateTurret TargetId="Id" />	int16
<DeactivateTurret TargetId="Id" />	int16
<ActivateConsole TargetId="Id" />	int16
<DeactivateConsole TargetId="Id" />	int16
<ActivateAlarm TargetId="Id" />	int16
<DeactivateAlaram TargetId="Id" />	int16
<ActivateTrigger TargetId="Id" />	int16
<DeactivateTrigger TargetId="Id" />	int16
<LockDoor TargetId="Id" />	int16
<UnlockDoor TargetId="Id" />	int16

laser movements

The hardest part in setting up triggers was pointing them in the correct direction. After much testing here are the Rotation numbers for each direction. - EdT

Laser Direction 0
<Rotation>0 90 0</Rotation> Moves left of position
<Rotation>180 90 0</Rotation> Moves right of position
<Rotation>270 90 0</Rotation>Moves above position
<Rotation>90 90 0</Rotation> Moves below position

Laser Direction 90
<Rotation>0 180 0</Rotation> Moves left of position
<Rotation>180 180 0</Rotation> Moves right of position
<Rotation>270 180 0</Rotation>Moves above position
<Rotation>90 180 0</Rotation> Moves below position

Laser Direction 180
<Rotation>0 270 0</Rotation> Moves left of position
<Rotation>180 270 0</Rotation> Moves right of position
<Rotation>270 270 0</Rotation>Moves above position
<Rotation>90 270 0</Rotation> Moves below position

Laser Direction 270
<Rotation>0 0 0</Rotation> Moves left of position
<Rotation>180 0 0</Rotation> Moves right of position
<Rotation>270 0 0</Rotation>Moves above position
<Rotation>90 0 0</Rotation> Moves below position