OBD:AGQG

ONI BINARY DATA AGQC << Other file types >> AGQR AGQG : Gunk Quad General Array switch to XML:AGQG page Overview @ Oni Stuff

Offset	Type	Raw Hex	Value	Description
0x00	res_id	01 49 02 00	585	00585-.AGQG
0x04	lev_id	01 00 00 06	3	level 3
0x08	char[20]	AD DE	dead	unused
0x1C	int32	15 A8 00 00	35349	array size
First element (black outline)
0x00	int32	00 00 00 00	0	PNTA element for 1st vertex
0x04	int32	01 00 00 00	1	PNTA element for 2nd vertex
0x08	int32	02 00 00 00	2	PNTA element for 3rd vertex
0x0C	int32	03 00 00 00	3	PNTA element for 4th vertex
0x10	int32	F5 0F 00 00	4085	TXCA element for 1st vertex
0x14	int32	F3 0F 00 00	4083	TXCA element for 2nd vertex
0x18	int32	F4 0F 00 00	4084	TXCA element for 3rd vertex
0x1C	int32	F6 0F 00 00	4086	TXCA element for 4th vertex
0x20	color	00 00 00 00	0, 0, 0, 0	byte-swapped ARGB color for 1st vertex
0x24	color	00 00 00 00	0, 0, 0, 0	byte-swapped ARGB color for 2nd vertex
0x28	color	02 07 09 00	2, 7, 9, 0	byte-swapped ARGB color for 3rd vertex
0x2C	color	06 15 1E 00	6, 21, 30, 0	byte-swapped ARGB color for 4th vertex
0x30	bitset32	00 00 08 02	0, 0, 8, 2	flags (see below this table)
0x34	int32	FF FF FF FF	-1	object ID and type to which this quad belongs (see ONOA for details); -1 if it does not belong to an object

Triangles

Many quads are in fact triangles: the last two vertices have the same PNTA and TXCA entries, and the ARGB color is (255, 205, 205, 205) (80% gray, 100% opaque). There is also a flag specifying that (see below).

Flags

0x01 00 00 00 - unknown

0x02 00 00 00 - ghost (pathfinding volume separator, see AKVA etc)

0x04 00 00 00 - stairs up

0x08 00 00 00 - stairs down

0x10 00 00 00 - stairs

0x20 00 00 00 - set at runtime for Jell'Oed quads, never used in files

0x40 00 00 00 - triangle (see above)

0x80 00 00 00 - transparency (if 0 then alpha is ignored, color is just RGB shading)

0x00 01 00 00 - unknown, never used in files

0x00 02 00 00 - two-sided

0x00 04 00 00 - unknown, never used in files

0x00 08 00 00 - no collision

0x00 10 00 00 - unknown, never used in files

0x00 20 00 00 - invisible

0x00 40 00 00 - no object collision

0x00 80 00 00 - no character collision

0x00 00 01 00 - no occlusion

0x00 00 02 00 - danger

0x00 00 04 00 - set at runtime for quads hidden with *env_show*, never used in files

0x00 00 08 00 - vertical collision: slope < 70°

0x00 00 10 00 - horizontal collision: slope > 70°

0x00 00 20 00 - unknown, never used in files

0x00 00 40 00 - ignore grid

0x00 00 80 00 - no decal

0x00 00 00 01 - furniture

0x00 00 00 02 - projection plan bit 0, see below

0x00 00 00 04 - projection plan bit 1, see below

0x00 00 00 08 - sound-transparent

0x00 00 00 10 - impassable

0x00 00 00 20 - unknown, never used in files

0x00 00 00 40 - unknown, never used in files

0x00 00 00 80 - unknown, never used in files

Projection plane flags

These 2 flags can be 00, 01, 10 and 11. That means the values 0,1,2 and 3 which have the following meanings:

• 0 - No projection plane specified. One can be computed if needed. Never used in files, may slow down the game if used.
• 1 - Project quad on XY plane.
• 2 - Project quad on XZ plane.
• 3 - Project quad on YZ plane.

The projection plane is used to determine if a point is in a quad (this point is usually the result of an intersection between a ray and the quad plane).

ONI BINARY DATA
AGQC << Other file types >> AGQR
AGQG : Gunk Quad General Array
Level file