Talk:Mod Tool/OniTools addon: Difference between revisions

From OniGalore
Jump to navigation Jump to search
m (Note to self: clean up!)
m (display flag via ICE, I forgot how to do it, this time I will write it down)
Line 5: Line 5:
: --[[User:Paradox-01|paradox-01]] ([[User talk:Paradox-01|talk]]) 21:27, 16 July 2014 (CEST)
: --[[User:Paradox-01|paradox-01]] ([[User talk:Paradox-01|talk]]) 21:27, 16 July 2014 (CEST)


==Dev notes for the remake==
===Display flag via ICE===
Normally using a "Simulate Rigid Bodies" ICETree node is clearly none-sense. But it works, so ...
https://dl.dropboxusercontent.com/u/139715/OniGalore/abusing_ICE_for_displaying_a_flag.png
'### setup flag display by abusing ICE
CreatePrim "Cube", "MeshSurface"
ApplyOp "ICETree", selection(0), siNode, , , 0
AddICENode "$XSI_DSPRESETS\ICENodes\SimulateRigidBodiesNode.Preset", selection(0) & ".polymsh.ICETree"
ConnectICENodes selection(0) & ".polymsh.ICETree.port1", selection(0) & ".polymsh.ICETree.SimulateRigidBodies.simulate"
AddICENode "$XSI_DSPRESETS\ICENodes\IntegerNode.Preset", selection(0) & ".polymsh.ICETree"
ConnectICENodes selection(0) & ".polymsh.ICETree.SimulateRigidBodies.precision", selection(0) & ".polymsh.ICETree.IntegerNode.result"
DisplayPortValues selection(0) & ".polymsh.ICETree.SimulateRigidBodies.precision"
SetValue selection(0) & ".polymsh.ICETree.IntegerNode.value", 7
SaveKey selection(0) & ".polymsh.ICETree.IntegerNode.value", 1
'### check if ICETree op exist on this object
for each oOperator in selection(0).ActivePrimitive.ConstructionHistory
if oOperator.Name = "ICETree" then
  got_ICE = 1
  end if
Next
if got_ICE then
  logmessage "found ICETree"
else
  logmessage "couldn't find ICETree"
end if




Line 70: Line 99:




===Adding multiple textures to level geometry===
===Adding multiple textures to level geometry [out-dated]===
Material and textures are normally stored right under the object. But AKEV geometry can have more than one texture. Here comes polygon clusters in to play.
Material and textures are normally stored right under the object. But AKEV geometry can have more than one texture. Here comes polygon clusters in to play.


Revision as of 20:53, 31 July 2014

Note to self:

I must merge this with http://wiki.oni2.net/Talk:Mod_Tool
and clean up notes that are out-of-date
--paradox-01 (talk) 21:27, 16 July 2014 (CEST)


Dev notes for the remake

Display flag via ICE

Normally using a "Simulate Rigid Bodies" ICETree node is clearly none-sense. But it works, so ...

abusing_ICE_for_displaying_a_flag.png 

'### setup flag display by abusing ICE
CreatePrim "Cube", "MeshSurface"
ApplyOp "ICETree", selection(0), siNode, , , 0
AddICENode "$XSI_DSPRESETS\ICENodes\SimulateRigidBodiesNode.Preset", selection(0) & ".polymsh.ICETree"
ConnectICENodes selection(0) & ".polymsh.ICETree.port1", selection(0) & ".polymsh.ICETree.SimulateRigidBodies.simulate"
AddICENode "$XSI_DSPRESETS\ICENodes\IntegerNode.Preset", selection(0) & ".polymsh.ICETree"
ConnectICENodes selection(0) & ".polymsh.ICETree.SimulateRigidBodies.precision", selection(0) & ".polymsh.ICETree.IntegerNode.result"
DisplayPortValues selection(0) & ".polymsh.ICETree.SimulateRigidBodies.precision"
SetValue selection(0) & ".polymsh.ICETree.IntegerNode.value", 7
SaveKey selection(0) & ".polymsh.ICETree.IntegerNode.value", 1

'### check if ICETree op exist on this object
for each oOperator in selection(0).ActivePrimitive.ConstructionHistory
	if oOperator.Name = "ICETree" then
 		got_ICE = 1
  	end if
Next
if got_ICE then
  		logmessage "found ICETree"
else
  		logmessage "couldn't find ICETree"
end if


More wild ideas

Animated reference

Every step on the timeline triggers an event, namely siOnTimeChangeEvent.

It could be used to exchange an the image of an object.

This could be either good for an animated textures (BINA3RAPd*.oni) or for an animated reference for TRAM creation.

Strategy:

  • Making a folder named "Animated_Ref".
  • Drag and drop the folder into Mod Tool.
  • A grid becomes created on a new layer "Animated_Ref". Selection disabled.
  • Mod Tool gets then the first image and looks for the pixels.
  • Based on that pixels the grids becomes deformed to match the image's proportions.
  • Then this "Animated_Ref" grid should be ready for usage.


Similar can be done with the Rotoscope.

Something like that: 

function siOnTimeChangeEvent_OnEvent( in_ctxt )
	' fixed code
	'SetValue "Views.ViewD.RightCamera.camdisp.rotoenable", True
	'SetValue "Views.ViewD.RightCamera.rotoscope.imagename", "Clips.Animated_Ref_N_jpg"

	' flexible code
	' find active viewport, set Rotoscope active and choose image
	'SetValue GetViewCamera(GetViewIndex) & ".camdisp.rotoenable", True
	'SetValue GetViewCamera(GetViewIndex) & ".rotoscope.imagename", "Clips.Animated_Ref_N_jpg"


	current_frame = cstr(in_ctxt.GetAttribute("Frame"))
	if GetValue(GetViewCamera(GetViewIndex) & ".camdisp.rotoenable") = true then
	   ' Animated_Ref_60.jpg ' . becomes _
	   SetValue GetViewCamera(GetViewIndex) & ".rotoscope.imagename", "Clips.Animated_Ref_" & current_frame & "_jpg"      
	end if

	siOnTimeChangeEvent_OnEvent = true
end function


New camera animations

last frame of OBANOutroCam02
camera_OBAN_examination_tn_zpsc8295474.png

There's already an excel macro available but now I want to build cam anims without excel.

The last frame's rotation of level1_Final file OBANOutroCam02 is: -0.0158410165 0.854542 0.0261086561 -0.518483639.

Those quaternions are sorted in X Y Z -W order, so we've to watch out a bit when setting the input for converting them to euler rotations in degrees.

If a newly created object (in this case a cube) shall serve as camera placeholder then the X output has to be multiplied by -1 and the Y output has to be reduced by -180. Those changes must repeated again when exporting the object's rotation to xml.

Update: Sept. 29, 2012

If camera is a real one then the additional X and Y changes aren't necessary. (Primitive > Camera > any should do)

Positions and rotations keyframes can be applied to the camera root object.


Adding multiple textures to level geometry [out-dated]

Material and textures are normally stored right under the object. But AKEV geometry can have more than one texture. Here comes polygon clusters in to play.

An example: 

set oCube = Application.ActiveProject.ActiveScene.Root.AddGeometry("Cube","MeshSurface")
SelectObj "cube", , True
SelectGeometryComponents "cube.poly[LAST]"
CreateCluster

AddToCluster "cube.polymsh.cls.Polygon, cube.poly[2-4]"
RemoveFromCluster "cube.polymsh.cls.Polygon, cube.poly[3]"

The cube has now a polygon cluster. More can be added. Each cluster must get its own material before a texture can be applied to the desired polygons.

[...]


TRBS-fitting TRMA creation

With the following code ...

  • the objects get listed one after another (TRMA-ready)
  • the textures get listed for TRMA and TXMP creation
  • the texture sizes get checked to see if "-large" argument is necessary

One more idea is to add support for reflective textures.


Current status:

hexhound hierarchy

hexhound_hierarchy_tn_zpsd82230ce.png 

if selection.count > 0 then
	' any part could be selected, let's find the root body part
	SelectNeighborObj selection(0), 4
	' get all members including the pelvis
	set bodyparts = selection(0).FindChildren( , , siMeshFamily)
	for each member in bodyparts
		logmessage "object name: " & member.name
		if not typename(member.Material.CurrentImageClip) = "Nothing" then
			logmessage "texture: " & member.Material.CurrentImageClip.source.filename.value
			'logmessage "material: " & member.Material.name
			'logmessage "shader: " & member.Material.shaders(0).name
			logmessage "X: " & member.Material.CurrentImageClip.source.Parameters("XRes").Value
			logmessage "Y: " & member.Material.CurrentImageClip.source.Parameters("YRes").Value
		end if
		logmessage "----------------------------------------------------------"
	next
	logmessage "counted body parts: " & bodyparts.count
else
	logmessage "no object was selected"
end if
Retrieved from "https://wiki.oni2.net/w/index.php?title=Talk:Mod_Tool/OniTools_addon&oldid=23865"