OBD:TRAM/raw0x24

shortcut part  <<  TRAM - throw part  >>  footstep part

This part belongs to the 01828-KONCOMthrow_fw_p.TRAM file.

Offset	Type	Raw Hex	Value	Description
First element (black outline)
0x00	float	8A 39 2C BF	-0.672752	X-axis adjustment to throw target; see below for info X+ is left, X- is right
0x04	float	10 39 B4 3F	0.793839	Y-axis adjustment to throw target; see below for info Y+ is up, Y- is down
0x08	float	44 2D 1C 41	9.761051	Z-axis adjustment to throw target; see below for info Z+ is forward, Z- is backward
0x0C	float	DB 0F 49 40	3.141593	angle adjustment in radians; when throw is successful, target is turned around his axis by this angle (π = 180°)
0x10	float	00 00 40 41	12.000000	distance tolerance; read below for important notice
0x14	int16	60 00	96	anim type for the animation of the target; types listed HERE

Throw target axis adjustment

• When throw is successful, these axis adjustments are applied on the target to move ("teleport") him in a way which creates the proper distance between participants so the throw looks good. Note that this adjustment happens instantly at the start of the throw. Oni will perform a collision check and modify the target's adjusted location so that it doesn't pass through any intervening obstacle.

• Y-axis surprise: When you lift the enemy with a +Y value, the bounding box actually raises off the ground as if he jumped. Usually when executing TRAMs, a +Y value just stretches the bounding box of the character from the floor to their current height; that is why you cannot throw enemies over railings. After the lift is performed, the target falls down normally according to gravity.

Distance tolerance

• Be aware that when setting the throw distance tolerance, you have to make sure it is equal to or greater than the parent TRAC's throw distance for the same throw type (for example, throw_fw_p is in Comguy's TRAC and the Comguy TRAC is inherited by Muro). If you set a lower value in the child TRAC, the parent's throw TRAM will play instead when you are beyond the range of the child's throw but not the parent's throw.

• There is also the matter of angular tolerance – how much can the throw participants deviate from perfectly facing each other and the throw still occur. This number is hardcoded to 45°.

shortcut part  <<  TRAM - throw part  >>  footstep part