Talk:Mod Tool/OniTools addon

From OniGalore
< Talk:Mod Tool
Revision as of 21:53, 13 September 2014 by Paradox-01 (talk | contribs) (1) OBJC id ... that was something else ... correcting this. 2) getting the required polygons as quads turned out to be a trilema)
Jump to navigation Jump to search

Note to self:

I must merge this with http://wiki.oni2.net/Talk:Mod_Tool
and clean up notes that are out-of-date
--paradox-01 (talk) 21:27, 16 July 2014 (CEST)


Dev notes for the remake

Display flag via ICE

Using a "Simulate Rigid Bodies" ICETree node for this is overkill. But it works and I fail to come up with alternatives, so...

abusing_ICE_for_displaying_a_flag.png 

'### setup flag display by abusing ICE
CreatePrim "Cube", "MeshSurface"
ApplyOp "ICETree", selection(0), siNode, , , 0
AddICENode "$XSI_DSPRESETS\ICENodes\SimulateRigidBodiesNode.Preset", selection(0) & ".polymsh.ICETree"
ConnectICENodes selection(0) & ".polymsh.ICETree.port1", selection(0) & ".polymsh.ICETree.SimulateRigidBodies.simulate"
AddICENode "$XSI_DSPRESETS\ICENodes\IntegerNode.Preset", selection(0) & ".polymsh.ICETree"
ConnectICENodes selection(0) & ".polymsh.ICETree.SimulateRigidBodies.precision", selection(0) & ".polymsh.ICETree.IntegerNode.result"
DisplayPortValues selection(0) & ".polymsh.ICETree.SimulateRigidBodies.precision"
SetValue selection(0) & ".polymsh.ICETree.IntegerNode.value", 7
SaveKey selection(0) & ".polymsh.ICETree.IntegerNode.value", 1

'### check if ICETree op exist on this object
for each oOperator in selection(0).ActivePrimitive.ConstructionHistory
	if oOperator.Name = "ICETree" then
 		got_ICE = 1
  	end if
Next
if got_ICE then
  		logmessage "found ICETree"
else
  		logmessage "couldn't find ICETree"
end if


More wild ideas

Vertex shading on doors, consoles, etc.

XML-based AKEV editing isn't possible. But now I know about binary file reading, so it should be possible to do binary file patching as well.

Neo said that adding vertex shading to re-imported OBJC meshes is something he isn't really keen on because the current level building is based on M3GM files which can't store vertex shading data.

Also he isn't convinced that OniSplit could easily associate these M3GMs with vertex shading saved in another file.

Still I'm not willing to give up on this. ^_^

Here's the plan:

  1. import a console into Mod Tool
  2. associate an ID (and everything else necessary to build the "BINACJBOconsole.xml" file later)
  3. apply vertex shading
  4. hit level export button to build the BINACJBOconsole and other xml and eventully all level files as onis
  5. now it would be time for the binary AKEV patching
    1. console id can be used to identify the polygons in AKEV's AGQG instance where the vertex shading is stored (<Colors>)
    2. now we have to hope that onisplit imported the mesh's polygons in the same order as Mod Tool read the polygons
    3. getting the vertex color from Mod Tool: there's already a code piece on MT's page ("[42] get vertex color")


I'm not fluent with binary stuff so I will dump some notes here:


Data table

Reading the AKEV's name table was more or less easy. This time we need to look up the data table.

Three things to take care about: reading hex numbers backwards (as usual in Oni), adding relative offsets to data table's offset (took a pretty while to find that one out*), subtracting 8 bytes for no other reason to get the correct offset.

* Regarding binary information I found THAT page very useful.


What AKEV data do we need? The structure is fixed, so actually only the size or the item count is needed to pin down all colors.

data table offset at 0x20
AGQG offset (A) at 0x94
AGQG size (B) at 0x9C
AGQG items at 0x20 + A + 0x1C - 8
AGQG start at 0x20 + A - 8
AGQG end at 0x20 + A + B - 8


Color data in AGQG

The byte array is like this: BF BF BF FF (191 191 191 255 = grey).

The format is BGRA whereby I couldn't see Alpha to have an effect on the color strength. Maybe it will be different with a texture (not tested yet).


AGQG reader

https://dl.dropboxusercontent.com/u/139715/OniGalore/temp/AKEV_AGQG_reader.txt

output sample: 

' INFO : 000280
' INFO : data table offset: 640
' INFO : 0004A8
' INFO : AGQG table offset: 1192
' INFO : 0001E0
' INFO : AGQG table size: 480
' INFO : ------------------------------
' INFO : AGQG_start: 1824
' INFO : ------------------------------
' INFO : AGQG array size: 8
' INFO : ----------
' INFO : element: 1
' INFO : 00000000
' INFO : 01000000
' INFO : 02000000
' INFO : 03000000
' INFO : 00000000
' INFO : 00000000
' INFO : 00000000
' INFO : 00000000
' INFO : BFBFBFFF (color: 191 191 191 255)
' INFO : BFBFBFFF (color: 191 191 191 255)
' INFO : BFBFBFFF (color: 191 191 191 255)
' INFO : BFBFBFFF (color: 191 191 191 255)
' INFO : 00000804
' INFO : FFFFFFFF (object id: -1)
' INFO : ----------
' INFO : [...]


Complications

M3GM files use triangles while AGQG instances use quads (look, there are always 4 points each with its own 32-bit color slot).

That means Onisplit converts the M3GM triangles into quads on import.

So Mod Tool would need to exactly mimic OniSplit's way turning triangles into quads.

This information is based on following experience:

  • Console0 triangles = 94
  • After triangle-to-quad conversion.
Console0: 47 quads = 38 (main) + 6 (collision box) + 1 + 1 + 1 (light tex quads)
  • AGQG has 47 elements.


There are now 3 options:

  • get Neo's OniSplit algorithm to quadrangulate the mesh in Mod Tool (complicated)
  • read the AKEV xml file to get the mesh's vertices/quads (slow and uncool)
  • extract the mesh as dae from AKEV and use that as vertex shading object (reference for M3GM) (faster but uncool because it still requires all consoles, doors, etc.)

Animated reference

Every step on the timeline triggers an event, namely siOnTimeChangeEvent.

It could be used to exchange an the image of an object.

This could be either good for an animated textures (BINA3RAPd*.oni) or for an animated reference for TRAM creation.

Strategy:

  • Making a folder named "Animated_Ref".
  • Drag and drop the folder into Mod Tool.
  • A grid becomes created on a new layer "Animated_Ref". Selection disabled.
  • Mod Tool gets then the first image and looks for the pixels.
  • Based on that pixels the grids becomes deformed to match the image's proportions.
  • Then this "Animated_Ref" grid should be ready for usage.


Similar can be done with the Rotoscope.

Something like that: 

function siOnTimeChangeEvent_OnEvent( in_ctxt )
	' fixed code
	'SetValue "Views.ViewD.RightCamera.camdisp.rotoenable", True
	'SetValue "Views.ViewD.RightCamera.rotoscope.imagename", "Clips.Animated_Ref_N_jpg"

	' flexible code
	' find active viewport, set Rotoscope active and choose image
	'SetValue GetViewCamera(GetViewIndex) & ".camdisp.rotoenable", True
	'SetValue GetViewCamera(GetViewIndex) & ".rotoscope.imagename", "Clips.Animated_Ref_N_jpg"


	current_frame = cstr(in_ctxt.GetAttribute("Frame"))
	if GetValue(GetViewCamera(GetViewIndex) & ".camdisp.rotoenable") = true then
	   ' Animated_Ref_60.jpg ' . becomes _
	   SetValue GetViewCamera(GetViewIndex) & ".rotoscope.imagename", "Clips.Animated_Ref_" & current_frame & "_jpg"      
	end if

	siOnTimeChangeEvent_OnEvent = true
end function


New camera animations

last frame of OBANOutroCam02
camera_OBAN_examination_tn_zpsc8295474.png

There's already an excel macro available but now I want to build cam anims without excel.

The last frame's rotation of level1_Final file OBANOutroCam02 is: -0.0158410165 0.854542 0.0261086561 -0.518483639.

Those quaternions are sorted in X Y Z -W order, so we've to watch out a bit when setting the input for converting them to euler rotations in degrees.

If a newly created object (in this case a cube) shall serve as camera placeholder then the X output has to be multiplied by -1 and the Y output has to be reduced by -180. Those changes must repeated again when exporting the object's rotation to xml.

Update: Sept. 29, 2012

If camera is a real one then the additional X and Y changes aren't necessary. (Primitive > Camera > any should do)

Positions and rotations keyframes can be applied to the camera root object.


Adding multiple textures to level geometry [out-dated]

Material and textures are normally stored right under the object. But AKEV geometry can have more than one texture. Here comes polygon clusters in to play.

An example: 

set oCube = Application.ActiveProject.ActiveScene.Root.AddGeometry("Cube","MeshSurface")
SelectObj "cube", , True
SelectGeometryComponents "cube.poly[LAST]"
CreateCluster

AddToCluster "cube.polymsh.cls.Polygon, cube.poly[2-4]"
RemoveFromCluster "cube.polymsh.cls.Polygon, cube.poly[3]"

The cube has now a polygon cluster. More can be added. Each cluster must get its own material before a texture can be applied to the desired polygons.

[...]


TRBS-fitting TRMA creation

With the following code ...

  • the objects get listed one after another (TRMA-ready)
  • the textures get listed for TRMA and TXMP creation
  • the texture sizes get checked to see if "-large" argument is necessary

One more idea is to add support for reflective textures.


Current status:

hexhound hierarchy

hexhound_hierarchy_tn_zpsd82230ce.png 

if selection.count > 0 then
	' any part could be selected, let's find the root body part
	SelectNeighborObj selection(0), 4
	' get all members including the pelvis
	set bodyparts = selection(0).FindChildren( , , siMeshFamily)
	for each member in bodyparts
		logmessage "object name: " & member.name
		if not typename(member.Material.CurrentImageClip) = "Nothing" then
			logmessage "texture: " & member.Material.CurrentImageClip.source.filename.value
			'logmessage "material: " & member.Material.name
			'logmessage "shader: " & member.Material.shaders(0).name
			logmessage "X: " & member.Material.CurrentImageClip.source.Parameters("XRes").Value
			logmessage "Y: " & member.Material.CurrentImageClip.source.Parameters("YRes").Value
		end if
		logmessage "----------------------------------------------------------"
	next
	logmessage "counted body parts: " & bodyparts.count
else
	logmessage "no object was selected"
end if
Retrieved from "https://wiki.oni2.net/w/index.php?title=Talk:Mod_Tool/OniTools_addon&oldid=23931"