OBD:TRAM/raw0x34

From OniGalore
< OBD:TRAM
Revision as of 04:35, 22 January 2006 by Geyser (talk | contribs)
Jump to navigation Jump to search

Here's the minimal structure of the body animation tracks for a TRAM file (address stored at 0x34 in the dat)

(The example below is for SHINZOMidle1)

The global stucture is 19 bone tracks, preceded by a list of their offsets (the "header").

Information required to read this part :

  • number of body parts (0x16A in the dat)
  • "compression size" (0x160 in the dat)
  • frame count (0x16C in the dat)

The size of a bone track is not known in advance. See "General info" below.

SHINZOMidle1.png

Header

0x00-0x23 : list of the offsets of the 19 bone tracks

Offset Body part Raw hex Value (offset of orientation track)
0x00 Pelvis 2600 0x26
0x02 Lt Thigh 3300 0x33
0x04 Lt Calf 4000 0x40
0x06 Lt Foot 4D00 0x4D
0x08 Rt Thigh 5A00 0x5A
0x0A Rt Calf 6700 0x67
0x0C Rt Foot 7400 0x74
0x0E Mid 8100 0x81
0x10 Chest 8E00 0x8E
0x12 Neck 9B00 0x9B
0x14 Head A800 0xA8
0x16 Lt Shoulder B500 0xB5
0x18 Lt Arm C200 0xC2
0x1A Lt Wrist CF00 0xCF
0x1C Lt Fist DC00 0xDC
0x1E Rt Shoulder E900 0xE9
0x20 Rt Arm F600 0xF6
0x22 Rt Wrist 0301 0x103
0x24 Rt Fist 1001 0x110

Bone tracks

General info

An orientation track is a succession of keyframe fields (either 6 or 16 bytes depending on the "compression size") defining the orientation of the bone at a key moment. Every pair of keyframes is separated by an interval field (one byte) defining the number of frames between the two key moments. Orientation is interpolated linearly between two keyframes over the interval between them. If the cumulated intervals reach the total frame count of the animation (minus 1) then the next keyframe is the final one.

Thus the length of the track is determined upon reading

Compression size 6

correspondence
Angle Short Raw hex
0x0000 0x0000
45° 0x2000 0x0020
90° 0x4000 0x0040
180° 0x8000 0x0080
270° 0xC000 0x00C0

An orientation consists of three angles, each of them a 2-byte integer (short).

The example here is the SHINZOMidle1 animation (10 frames long)

Offset Body part Raw hex from over to
0x26 Pelvis 5F45 F93D B6FA 09 5F45 F93D B6FA (97°, 87°, 352°) 9 frames (97°, 87°, 352°)
0x33 Lt Thigh 1839 1B34 8877 09 1839 1B34 8877 (°, °, °) 9 frames (°, °, °)
0x40 Lt Calf 0000 0000 96AB 09 0000 0000 96AB (0°, 0°, °) 9 frames (0°, 0°, °)
0x4D Lt Foot 9436 DFFB 3E15 09 9436 DFFB 3E15 (°, °, °) 9 frames (°, °, °)
0x5A Rt Thigh 5351 3D13 DC9C 09 5351 3D13 DC9C (°, °, °) 9 frames (°, °, °)
0x67 Rt Calf 0000 0000 D5E7 09 0000 0000 D5E7 (0°, 0°, °) 9 frames (0°, 0°, °)
0x74 Rt Foot 5703 30FA ACF4 09 5703 30FA ACF4 (°, °, °) 9 frames (°, °, °)
0x81 Mid 1302 6301 6DFE 09 1302 6301 6DFE (°, °, °) 9 frames (°, °, °)
0x8E Chest 0402 9F06 7FF4 09 0402 9F06 7FF4 (°, °, °) 9 frames (°, °, °)
0x9B Neck 0000 FEFF 496F 09 0000 FEFF 496F (0°, °, °) 9 frames (0°, °, °)
0xA8 Head 90FB 2504 639B 09 90FB 2504 639B (°, °, °) 9 frames (°, °, °)
0xB5 Lt Shoulder 6548 B4DF 1677 09 6548 B4DF 1677 (°, °, °) 9 frames (°, °, °)
0xC2 Lt Arm 90E2 360D 48E5 09 90E2 360D 48E5 (°, °, °) 9 frames (°, °, °)
0xCF Lt Wrist 0000 0000 D7E4 09 0000 0000 D7E4 (0°, 0°, °) 9 frames (0°, 0°, °)
0xDC Lt Fist 1ABD 51EB D718 09 1ABD 51EB D718 (°, °, °) 9 frames (°, °, °)
0xE9 Rt Shoulder AD8B 592B 0D5E 09 AD8B 592B 0D5E (°, °, °) 9 frames (°, °, °)
0xF6 Rt Arm 2C1C 1116 40D7 09 2C1C 1116 40D7 (°, °, °) 9 frames (°, °, °)
0x103 Rt Wrist 0000 0000 1734 09 0000 0000 1734 (0°, 0°, °) 9 frames (0°, 0°, °)
0x110 Rt Fist 2341 5404 53EE 09 2341 5404 53EE (°, °, °) 9 frames (°, °, °)

In this example, there are only two keyframes for every bone, and the orientation is identical for both keyframes : in fact, Shinatama remains completely frozen during the whole anim.

Origin and direction of the angles

If the (0°, 0°, 0°) orientation is set for every bone, then all the bones point along the x axis of the character (from right to left) and face upwards

Viewed from above (front is now up), you get something like this : "o" is a pivot (yeah, the shoulders are attached to the neck); ":)" is a smiley :)

15-o-14-o-13-o-12-o  4-o-3-o-2-o
                  |            |
           :)11-o-10-o-9-o-8-o-1
                  |            |
19-o-18-o-17-o-16-o  7-o-6-o-5-o

Every angle triplet defines the rotation of a bone with respect to its parent (the "parent" of the pelvis lies on its back with its head pointing left, as above...). The orientation of the parent defines an (x,y,z) axis set : assuming the parent is aligned as above, this is simply the normal coordinate system (x=left, y=up, z=front).

The first rotation is about the x axis, the second one is about the new y axis, and the last one is about the newest z axis. All rotations are in the normal trigonometric direction (clockwise if looking in the direction of the axis).

Effectively, the first angle is the "twist" of the bone with respect to its parent (because the direction of the parent is the "x axis", i.e. the axis of the first rotation).

A leg's orientation is quite intuitive : if you set everything to (0°, 0°, 0°) except the orientation of the thighs (both set to (0°, 0°, 180°)), you get "normal" legs. Arms are a bit more complicated.

More, later...

Compression size 16