User talk:Neo: Difference between revisions

From OniGalore
Jump to navigation Jump to search
mNo edit summary
No edit summary
Line 140: Line 140:


[[User:EdT|EdT]]
[[User:EdT|EdT]]
I'm still unsure how the XZ animation was produced. There's a keyframe (for the Z rotation of left_thigh) that causes this. It's value is 135 while all the other keyframes for Z are well below 0 (-150..-180). If you move that keyframe to something like -215 then the animation works fine. Or so it appears to me...
[[User:Neo|Neo]]

Revision as of 09:55, 11 January 2010

Talk page archives: #1 - #2 - #3 - #4 - #5


New OniSplit version: OniSplit v0.9.41

What's new:

  • fixed the Collada importer to work with 3DSMax exported files

New OniSplit version: OniSplit v0.9.40

What's new:

  • support for exporting/importing sound animations to/from xml files
  • better Collada export for environment
  • support for full color transparent textures (-format:bgra32 on the command line, ARGB8888 format in an xml file)
  • different (hopefully better) xml export format for animations (this one is actually from 0.9.38 but since that wasn't mentioned here...)
  • a more or less complete animation importer. This one deservers some notes:
-unlike other importers that produce .oni files this one produces and .xml file (similar to the one you get when exporting a TRAM)
when you do
 onisplit -create:tram target_dir animation.dae
in the target dir you'll get a TRAManimation.xml file.
You need to add some stuff to that file to make it actually work as an animation. In particular the animation type, from/to states and varient needs to be set.
-For all I know this works with animations exported from Oni and modified in Softimage. If you come up with a completly new animation it should work as long as the skeleton is similar to the one used in Oni.
-Note that the geometry that is present inside the Collada file is used to compute the "vertical extents" so it better be the same or close to the one the animation is intended for.
-The biggest problem are the attacks. While it's not difficult to add attacks to the xml file, computing the necessary "extents" is not going to be easy. I guess in the end I'll have to add some command to OniSplit to do it.
-Everything else that I forgot :)

Neo

New OniSplit version: OniSplit v0.9.37

What's new:

  • support for transparency in the environment importer


New OniSplit version: OniSplit v0.9.35

What's new:

  • conversion of recorded films (.dat binary files) to xml files that can be used to create FILM .oni files
   OniSplit film2xml out_dir film.dat

Neo

I get this error message using the command create:tram

 System.NotSupportedException: Invalid rotation axis {X:0 Y:0 Z:-1} for rotate transform in animation pelvis-node-ry
 at Oni.Totoro.AnimationDaeReader.FindRotations () [0x00000] 
 at Oni.Totoro.AnimationDaeReader.Import (System.String filePath, System.String outputDirPath) [0x00000] 
 at Oni.Program.CreateGeneric (System.String[] args) [0x00000] 
 at Oni.Program.Main (System.String[] args) [0x00000]  (1)

The dae files are here: http://www.filefront.com/14507129/dae.rar

xml animation file here: http://www.filefront.com/14507115/ID%20walking.xaf

Thanks EdT

Yep, caused by Z-up. I'll see what I can do.

Neo

Hi Neo,

When you have time, can you take a look at this:

TRBSproblem.jpg

When I use the latest FBX Converter 2010.2 to convert FBX to DAE, I get this problem. However, when I use an older version, it works fine. Here are the DAEs from both version: http://edt.oni2.net/temp/TRBSproblem.zip G2 is uses the new version, G1 uses the old.

Thanks EdT

Oh boy, the new converter uses matrix transforms instead of individual scale/rotate/translate transforms. I'll see what I can do...

Neo



The Iron Demon walks! Sorta...

You can see the video here: http://edt.oni2.net/ID/IDwalk.wmv

I converted the files from Bobbysoon (TRAMID_run1stepb.DAE, TRAMID_runstart.DAE, TRAMID_runstop.DAE) to xml. The XML gave the pelvis height as <Height>-2175.5</Height>, so I removed the negative and divided the height by 100. But as you can see, the model floats above the ground. Also, the velocity has some large numbers in the first part <Velocity>-4.076141 0</Velocity> I think that is the cause of the ID moving sideways not forward.

Files here: http://edt.oni2.net/ID/ID_Files.zip

EdT

Ha ha, that's going in my album of weird modding results. Anyway, I didn't even realize that animations were supposed to work yet, I thought we were waiting for an update to OniSplit. --Iritscen 14:33, 29 November 2009 (UTC)



Hi Neo,

Having problems converting DAEs to trams. I put all the files in a zip and included a ReadMe with the description of the errors. http://edt.oni2.net/temp/NeoTRAM.zip

I was trying to make new animations, whenever you have time, please take a look. Thanks EdT



Hmm... I just discovered that I can't export TXMPs from a .dat file to the PNG format. I am attempting to use the -extract:png command on a virgin .dat file. The -extract:tga options works fine, but the -extract:png option gives:

System.TypeInitializationException: An exception was thrown by the type initializer for System.Drawing.GDIPlus --->  System.DllNotFoundException: gdiplus.dll
 at (wrapper managed-to-native) System.Drawing.GDIPlus:GdiplusStartup (ulong&,System.Drawing.GdiplusStartupInput&,System.Drawing.GdiplusStartupOutput&)
 at System.Drawing.GDIPlus..cctor () [0x00000] 
 --- End of inner exception stack trace ---
 at System.Drawing.Bitmap..ctor (Int32 width, Int32 height, PixelFormat format) [0x00000] 
 at (wrapper remoting-invoke-with-check) System.Drawing.Bitmap:.ctor (int,int,System.Drawing.Imaging.PixelFormat)
 at Oni.Imaging.SysExporter.ExportInstance (Oni.InstanceDescriptor descriptor) [0x00000] 
 at Oni.Exporter.ExportInstanceList (System.Collections.Generic.List`1 descriptors) [0x00000] 
 at Oni.Exporter.Export (Oni.InstanceFileManager fileManager, System.String sourceFilePath, System.String filter) [0x00000] 
 at Oni.Program.ExtractTextures (System.String[] args) [0x00000] 
 at Oni.Program.Main (System.String[] args) [0x00000]

This occurred in both 0.9.38 and 0.9.41 on my Mac. I used to always extract TXMPs as TGA, so I don't know when this actually worked for me. --Iritscen 17:54, 2 January 2010 (UTC)

TGA always works because it's all done in OniSplit. For PNG/JPG I'm using the framework (.NET/Mono) and Mono seems to have a problem. Neo
I just tested it myself and I was able to extract all the textures from a virgin .dat file as PNG. I'm using the latest version 0.9.45 and the latest Mono framework. OSX 10.5.8 and 10.6.2 EdT
Okay, after many aborted attempts at updating mono (I was running 2.0.1) by building from source or using their binary installer, I realized that the installer was putting the files in some meaningless directory, and I ended up copying them to the right system directories, hoping I didn't overwrite libraries that were supposed to stay unchanged. Who knows what the consequences will be down the road for other stuff, but OniSplit now exports PNGs properly for me! --Iritscen 20:28, 3 January 2010 (UTC)

Observations of importing TRAMs to XSI.

Sometimes, imported TRAMs will have odd rotations mainly related to the pelvis and thighs. Here is one example, the Striker's walking TRAM: http://edt.oni2.net/TRAMS/WalkOS.wmv As you can see the pelvis and thighs are rotating in an odd fashion. This is due to euler vs quaternion rotations. To see it correctly in XSI, you can use the option to "Convert Euler Rotation to Quaternion" on the pelvis and thighs, then the animation appears correct: http://edt.oni2.net/TRAMS/WalkQT.wmv However, when importing a converted animation back to Oni, you get this result: http://edt.oni2.net/TRAMS/WalkOni.wmv

When a TRAM is imported to XSI, to "unwrap" a model from the default animation state, the right thigh is rotated 180 on the X axis and -180 on the Z axis, the left is rotated -180 on the X and -180 on the Z axis. Somehow, from this starting point, whenever XSI moves the thigh from a negative to a positive angle (or in the case of this example from positive to negative), the part would rotate the long way around as shown here: http://edt.oni2.net/TRAMS/ThighXZaxis.wmv

One workaround is to insert keyframes to cause the animation to rotate in the correct direction.

I found another approach that seems to work, if you are making an animation from scratch. That is to rotate the thighs down 180 on the Y axis. So far in my testing, there are no odd rotations: http://edt.oni2.net/TRAMS/ThighYaxis.wmv

The Striker DAE files and the XSI scene files are here: http://edt.oni2.net/TRAMS/TRAMfiles.zip

EdT

I'm still unsure how the XZ animation was produced. There's a keyframe (for the Z rotation of left_thigh) that causes this. It's value is 135 while all the other keyframes for Z are well below 0 (-150..-180). If you move that keyframe to something like -215 then the animation works fine. Or so it appears to me...

Neo