AE:Iron Demon: Difference between revisions

From OniGalore
Jump to navigation Jump to search
m (cat.d)
m (→‎Character class: localized image)
 
(13 intermediate revisions by 2 users not shown)
Line 1: Line 1:
For general information about the Demon, see [[Iron Demon]]
{{fmbox
  | text = This project is no longer under development, but another version of the Iron Demon was released as a package that is available through the [[AE]].
  }}
{{Hatnote|For general information about the mech, see [[Iron Demon]].}}
==Plotwise role==
==Plotwise role==
It is not clear whether we will be able to revive the BGI HQ chapter. If we do, the Iron Demon will probably appear as a boss. It is suposed to either guard the complex, or even to be [[BGI]]'s designated weapon against Mai. There is a minor chance that the Iron Demon actually is Mai's father... or Muro (captured by BGI and turned into a Daodanized and automotive variant of the [[Deadly Brain]]). Whether this will be developed or revealed depends on whether BGI HQ will constitute an alternate ending or not.
It is not clear whether we will be able to revive the BGI HQ chapter. If we do, the Iron Demon will probably appear as a boss. It is suposed to either guard the complex, or even to be [[BGI]]'s designated weapon against Mai. There is a minor chance that the Iron Demon actually is Mai's father... or Muro (captured by BGI and turned into a Daodanized and automotive variant of the [[Deadly Brain]]). Whether this will be developed or revealed depends on whether BGI HQ will constitute an alternate ending or not.
==3D models==
==3D models==
===by Seventeen Seconds===
===by Seventeen Seconds===
:http://www.youtube.com/watch?v=ezKzIGdKFkk
:http://geyser.oni2.net/edition/characters/iron_demon/iron_demon_obj.zip
:http://geyser.oni2.net/edition/characters/iron_demon/iron_demon_obj.zip
This model is mostly OK and low-poly enough to be used in Oni as-is, but it has a lot of non-planar quads, which cause symmetry issues "or worse". It diverges from Bungie's Demon in a few respects, but mostly it's an excellent placeholder (see below).
This model is mostly OK and low-poly enough to be used in Oni as-is, but it has a lot of non-planar quads, which cause symmetry issues "or worse". It diverges from Bungie's Demon in a few respects, but mostly it's an excellent placeholder (see below).
===by Ashley Davison===
===by Ashley Davison===
:http://www.youtube.com/watch?v=sa-h6lXQ-p4
:https://www.youtube.com/watch?v=sa-h6lXQ-p4
:http://www.turbosquid.com/3d-models/3d-model-robot/262162
:https://www.turbosquid.com/3d-models/3d-model-robot/262162
:http://geyser.oni2.net/edition/characters/iron_demon/walker_c4d2fbx.rar
:http://geyser.oni2.net/edition/characters/iron_demon/walker_c4d2fbx.rar
This model is available from Turbosquid for $1 and, much worse, only in Cinema 4D format. Cinema 4D was able to export it to FBX, but the resulting FBX, although loaded by the FBX SDK, can't be interpreted by the Autodesk converter or XSI's Crosswalk importer. A reasonable solution seems to use the SDK to retrieve the mesh, and then try and replicate the walking animation semi-manually. At any rate, this Demon is quite high-poly and diverges significantly from Bungie's. It is not certain that it will be suitable for use by a modern engine, let alone Oni's. But it can make for some nice renders, sure enough ^_^
This model is available from Turbosquid for $1 and, much worse, only in Cinema 4D format. Cinema 4D was able to export it to FBX, but the resulting FBX, although loaded by the FBX SDK, can't be interpreted by the Autodesk converter or XSI's Crosswalk importer. A reasonable solution seems to use the SDK to retrieve the mesh, and then try and replicate the walking animation semi-manually. At any rate, this Demon is quite high-poly and diverges significantly from Bungie's. It is not certain that it will be suitable for use by a modern engine, let alone Oni's. But it can make for some nice renders, sure enough ^_^
==Development==
==Development==
===Character class===
===Character class===
http://geyser.oni2.net/edition/characters/iron_demon/iron_demon_oncc.png
[[Image:Seventeen Seconds ID.jpg]]


The resources needed to obtain the above screenshot are here: http://geyser.oni2.net/edition/characters/iron_demon/iron_demon_oni.zip
The resources needed to obtain the above screenshot are here: http://geyser.oni2.net/edition/characters/iron_demon/iron_demon_oni.zip


He's of course worthless as a character, but he's already better than nothing, with the trailer in mind.
He's of course worthless as a character, but he's already better than nothing, with the trailer in mind.
:And we can already say we've officially revived Oni's Iron Demon, as an ONCC and ONCV, at least.  
:And we can already say we've officially revived Oni's Iron Demon, as an ONCC and ONCV, at least.
 
===Still to do===
===Still to do===
Pretty much everything. The current [[TRBS]] has all 19 meshes centered at the character's "feet"; the centers must be made consistent with the supposed joints used for the animations. Idle/walking/turning [[TRAM]] need to be authored, as well as a set of aiming screens, all consistent with the Demon's layout of joints, very different from that of the humanoid characters. Punch and kick TRAM will take care of emitting projectiles from the 3 "weapons". Maybe some shockwaves from the feet as well.
Pretty much everything. The current [[TRBS]] has all 19 meshes centered at the character's "feet"; the centers must be made consistent with the supposed joints used for the animations. Idle/walking/turning [[TRAM]] need to be authored, as well as a set of aiming screens, all consistent with the Demon's layout of joints, very different from that of the humanoid characters. Punch and kick TRAM will take care of emitting projectiles from the 3 "weapons". Maybe some shockwaves from the feet as well.


Last but not least, the geometry and textures ought to be nicified and, if possible, made consistent with Bungie's Iron Demon. A few issues with normals should probably be figured out before recording trailer footage (asymmetric quads pretty much everywhere + bad normals around the shinguard holes).
Last but not least, the geometry and textures ought to be nicified and, if possible, made consistent with Bungie's Iron Demon. A few issues with normals should probably be figured out before recording trailer footage (asymmetric quads pretty much everywhere + bad normals around the shinguard holes).
[[Category:AE to-do]]
 
[[Category:Obsolete AE mods]]

Latest revision as of 01:56, 5 March 2023

For general information about the mech, see Iron Demon.

Plotwise role

It is not clear whether we will be able to revive the BGI HQ chapter. If we do, the Iron Demon will probably appear as a boss. It is suposed to either guard the complex, or even to be BGI's designated weapon against Mai. There is a minor chance that the Iron Demon actually is Mai's father... or Muro (captured by BGI and turned into a Daodanized and automotive variant of the Deadly Brain). Whether this will be developed or revealed depends on whether BGI HQ will constitute an alternate ending or not.

3D models

by Seventeen Seconds

http://geyser.oni2.net/edition/characters/iron_demon/iron_demon_obj.zip

This model is mostly OK and low-poly enough to be used in Oni as-is, but it has a lot of non-planar quads, which cause symmetry issues "or worse". It diverges from Bungie's Demon in a few respects, but mostly it's an excellent placeholder (see below).

by Ashley Davison

https://www.youtube.com/watch?v=sa-h6lXQ-p4
https://www.turbosquid.com/3d-models/3d-model-robot/262162
http://geyser.oni2.net/edition/characters/iron_demon/walker_c4d2fbx.rar

This model is available from Turbosquid for $1 and, much worse, only in Cinema 4D format. Cinema 4D was able to export it to FBX, but the resulting FBX, although loaded by the FBX SDK, can't be interpreted by the Autodesk converter or XSI's Crosswalk importer. A reasonable solution seems to use the SDK to retrieve the mesh, and then try and replicate the walking animation semi-manually. At any rate, this Demon is quite high-poly and diverges significantly from Bungie's. It is not certain that it will be suitable for use by a modern engine, let alone Oni's. But it can make for some nice renders, sure enough ^_^

Development

Character class

Seventeen Seconds ID.jpg

The resources needed to obtain the above screenshot are here: http://geyser.oni2.net/edition/characters/iron_demon/iron_demon_oni.zip

He's of course worthless as a character, but he's already better than nothing, with the trailer in mind.

And we can already say we've officially revived Oni's Iron Demon, as an ONCC and ONCV, at least.

Still to do

Pretty much everything. The current TRBS has all 19 meshes centered at the character's "feet"; the centers must be made consistent with the supposed joints used for the animations. Idle/walking/turning TRAM need to be authored, as well as a set of aiming screens, all consistent with the Demon's layout of joints, very different from that of the humanoid characters. Punch and kick TRAM will take care of emitting projectiles from the 3 "weapons". Maybe some shockwaves from the feet as well.

Last but not least, the geometry and textures ought to be nicified and, if possible, made consistent with Bungie's Iron Demon. A few issues with normals should probably be figured out before recording trailer footage (asymmetric quads pretty much everywhere + bad normals around the shinguard holes).