XML:TRAM: Difference between revisions

From OniGalore
Jump to navigation Jump to search
m ('k)
(RealWorld flag)
Line 177: Line 177:
::::-If you set first attack part to be able to deal damage from 1st to 100th frame of TRAM, and second attack part to deal damage within that limit (e.g. from 25th to 41st frame, it can be again from 1 to 100), than first attack part an hurt from 1st to 100th (as usual), but even if it hits, that second one attack part (25th to 41st) can hurt enemy as well during "its lifetime". So two attack parts are allowed to execute. Note that second attack part MUST be executed while first attack part has active "window", otherwise it won't work.
::::-If you set first attack part to be able to deal damage from 1st to 100th frame of TRAM, and second attack part to deal damage within that limit (e.g. from 25th to 41st frame, it can be again from 1 to 100), than first attack part an hurt from 1st to 100th (as usual), but even if it hits, that second one attack part (25th to 41st) can hurt enemy as well during "its lifetime". So two attack parts are allowed to execute. Note that second attack part MUST be executed while first attack part has active "window", otherwise it won't work.
:RealWorld
:RealWorld
:::something with Y-velocities part -[[User:Loser|Loser]]
:::It appears this flag was used to create TRAM and OBAN from one animation source. The OBAN is supposed to store pelvis rotations and positions because that way a character can move over obstacles/gaps. The very most of them are used in cutscenes.
:DoAim
:DoAim
:::forces aim animation (PIS/RIF) if user has weapon
:::forces aim animation (PIS/RIF) if user has weapon

Revision as of 20:37, 4 May 2013

TRAM : Totoro Animation
XML modding tips
  • See HERE to start learning about XML modding.
  • See HERE if you are searching for information on how to handle object coordinates.
  • See HERE for some typical modding errors and their causes.
XML.png
XML

TRAC << Other file types >> TRAS

switch to OBD page


export

TRAM files can be extracted A) as pure xml files or combined B) as xml and dae files.

For editing the actual animation you will want to use method B.

While doing the export you might see errors such as

Cannot find instance 'TRAMKONCOMthrow_rev'
Cannot find instance 'TRAMKONCOMthrow_rev'
Cannot find instance 'TRAMKONRIFturn_right'
Cannot find instance 'TRAMKONOKOlev18_ZomStand'
Cannot find instance 'TRAMKONOKOcorner_hide'
Cannot find instance 'TRAMKONPIScorner_hide'

Ignore them, those files doesn't exist.

(Someday we should remove them from TRAC.)


via command line

onisplit -extract:xml output_path -anim-body:path_to_ONCCname.oni path_to_TRAMname.oni


via Vago

When you start Vago the "General" tab should be open by default. If not click on it. Then follow the five easy steps.

Step 1: Select "ONI" as ("From") input format.

Step 2: Select "XML" as ("To") output format.

Step 3: Check "Another TRAM" to chose a character animation file.

Step 4: Click on "Add" button to chose an ONCC file.

Step 5: Click on "Convert".


editing the actual animation

You can load the dae file into an compatible editor. So far the community's favorite is Mod Tool.

  • For correct Mod Tool settings look HERE
  • Tutorial: basics of Oni animation editing (todo)


import

revisited animations

Coming soon.


total new animations

Coming soon.


file structure

TRAM
  |
  +-- header: animation type, state, flags, particle, sounds, etc.
  +-- actual animation: heights, velocities, rotations
  +-- additional data: positions, throw adjustments, selfdamage, attack parts, extents


list of tags, types, and flags

Use the search function of your web browser to quickly find a tag.

(work in progress)

tag type description
<Lookup> parent tag
<Type> flag Look them up over HERE.
<AimingType> flag Look them up over HERE.
<FromState> flag Look them up over HERE.
Somtimes FromState is set to None; in another scenarios one FromState possibility is not enough.
In those cases Shortcuts are used. They extent the number from what state the animation can be played and under what conditions (replace atomic yes/no).
<ToState> flag Look them up over HERE.
<Varient> flag "<Varient />" if unused. E.g. that's the case for non-combat animations.
Combat
LeftPistol
LeftRifle
Panic
RightPistol
RightRifle
Sprint
<FirstLevel> int16
<Shortcuts> parent tag
<Shortcut> parent tag
<FromState> flag
<Length> int16
<ReplaceAtomic> flag
yes
no
<Flags> flag
RuntimeLoaded
(this bit is not animation related, it is used at runtime to mark that the animation was loaded)
Invulnerable
while playing this animation user is invulnerable to melee damage AND cannot be thrown, PAR3/height still hurts him
BlockHigh
if set then while playing this animation user can block high or undefined attacks within some arc which is before him, so if you set this to some animation where user spins, then he can still be legaly kicked to the @$$ and he can be thrown
BlockLow
same as before only it can block low or undefined attacks
Attack
animations with attack part have it, unknown what it does, IMO it turns on soft lock (characters turns with animation a bit in order to hit nearby enemy), but didn't checked
DropWeapon
if user is armed, he drops weapon when he plays this animation
InAir
something with jumps, didn't checked
Atomic
whole animation must be played, user cannot interrupt it once it starts
NoTurn
cannot turn by mouse while performing this animation
AttackForward
unknown, looks like this is rough info for AI2 about where attack aims from user's point of view -Loser
AttackLeft
same as above
AttackRight
same as above
AttackBackward
Overlay
these are not standalone animations, they just overwrite part of already playing one, for example holstering weapon is such an animation
DontInterpolateVelocity
unknown, but maybe it has something to do with X,Y,Z velocities and fact that for example directional jumps take info about direction vector from X-Z velocity part of TRAM (Y vector is in ONCC)
ThrowSource
unknown, throws use it
ThrowTarget
if set, then animation can hurt anybody, with its attack part, including teammates. User of TRAM can even hurt himself with "damage part" (user cannot hurt himself with own attack parts). It also allows two (try more, get crash ^_^) attack parts to be executed instead of only one (maybe bug?).
-If you set first attack part to be able to deal damage from 1st to 100th frame of TRAM, and second attack part to deal damage within that limit (e.g. from 25th to 41st frame, it can be again from 1 to 100), than first attack part an hurt from 1st to 100th (as usual), but even if it hits, that second one attack part (25th to 41st) can hurt enemy as well during "its lifetime". So two attack parts are allowed to execute. Note that second attack part MUST be executed while first attack part has active "window", otherwise it won't work.
RealWorld
It appears this flag was used to create TRAM and OBAN from one animation source. The OBAN is supposed to store pelvis rotations and positions because that way a character can move over obstacles/gaps. The very most of them are used in cutscenes.
DoAim
forces aim animation (PIS/RIF) if user has weapon
(used PIS/RIF animation and prone)
DontAim
forces not to aim
CanPickup
can pickup items in this animations, not like it plays pickup one, but like it "takes" the item if you have this animation on and you collide with item.
Aim360
unknown
DisableShield
if user had active supershield (chr_super "name" 1), this forces him to disable it (chr_super "name" 0) -Loser
NoAIPickup
AI2 are not permitted to pick up items with this animations
<Atomic> parent tag
<Start> int16
<End> int16
<Invulnerable> parent tag
<Start> int16
<End> int16
<Overlay> parent tag
<UsedBones> flag "<UsedBones />" if unsued.
Pelvis
LeftThigh
LeftCalf
LeftFoot
RightThigh
RightCalf
RightFoot
Mid
Chest
Neck
Head
LeftShoulder
LeftArm
LeftWrist
LeftFist
RightShoulder
RightArm
RightFist
<ReplacedBones> flag "<ReplacedBones />" if unused.
Pelvis
LeftThigh
LeftCalf
LeftFoot
RightThigh
RightCalf
RightFoot
Mid
Chest
Neck
Head
LeftShoulder
LeftArm
LeftWrist
LeftFist
RightShoulder
RightArm
RightFist
<DirectAnimations>
<Link> link First slot. "<Link />" if unused.
<Link> link Second slot. "<Link />" if unused.
<Pause>
<Hard> int16
<Soft> int16
<Interpolation>
<End> int16
<Max> int16
<FinalRotation> float final rotation in degrees
<Direction>
None
Forward
Backward
Left
Right
<Vocalization>
<ActionFrame>
<Impact> link "<Impact />" if unsued.
<Particles> parent tag
<Particle> parent tag
<Start>
<End>
<Bone> flag
<Name> link
<MotionBlur> parent tag
<MotionBlur> parent tag sequence element
<Bones> flag
Pelvis
LeftThigh
LeftCalf
LeftFoot
RightThigh
RightCalf
RightFoot
Mid
Chest
Neck
Head
LeftShoulder
LeftArm
LeftWrist
LeftFist
RightShoulder
RightArm
RightFist
<Start> int16
<End> int16
<Lifetime> int8
<Alpha> int8
<Interval> int8
<Footsteps> parent tag
<Footstep> parent tag
<Frame> int16
<Type> flag
Left
Right
<Sounds> parent tag "<Sounds />" if unused.
<Sound> parent tag
<Name> char[32] OSBDfile.imp.oni (don't use file prefix/suffix)
<Start> int16 the frame when the sound starts to play
<Heights>
<Height> float
<Velocities> parent tag
<Velocity> 2 x float
<Rotations> parent tag
<Bone> parent tag There are 19 bone tags. One for each body part.
<EKey> int8 + 3 * float for normal animations
<QKey> int8 + 4 * float for overlay animations used by TRAS

onisplit v0.9.54.0 produces <QKeys> (quaternions) instead of (euler rotations) <EKey> for normal animations

<PositionOffset> parent tag <PositionOffset> and <Positions> belong together. In the binaries they are written in the place.
<X> int16
<Z> int16
<Positions> parent tag
<Position> parent tag
<Height> float vertical extent
<YOffset> float y offset of the vertical extent from character location
<ThrowSource> parent tag "<ThrowSource />" if unused.
<TargetAdjustment> parent tag
<Position> 3 * float
<Angle> float
<Distance> float
<TargetType> flag The flags are part of the animation type list.

(static throws)

Thrown1 = ###COMthrow_fw_p_tgt
Thrown2 = ###COMthrow_fw_k_tgt
Thrown3 = ###COMthrow_bk_p_tgt
Thrown4 = ###COMthrow_bk_k_tgt

(running throws)

Thrown4 = ###COMrun_throw_fw_p_tgt
Thrown6 = ###COMrun_throw_fw_p_tgt
Thrown7 = ###COMrun_throw_bk_k_tgt
Thrown8 = ###COMrun_throw_bk_k_tgt (not tested)

(tackle throw = catching)

Thrown9 = ###COMrun_tkl_fw_p_tgt (not tested)
Thrown10 = ###COMrun_tkl_bk_p_tgt

(pistol disarms)

Thrown11 = ###PISthrow_fw_p_tgt
Thrown12 = ###PISthrow_fw_k_tgt
Thrown13 = ###PISthrow_bk_p_tgt

(rifle disarm)

Thrown14 = ###PISthrow_bk_k_tgt (not tested)
Thrown15 = ###RIFthrow_fw_p_tgt
Thrown16 = ###RIFthrow_bk_p_tgt
Thrown17 = ###RIF? = (not tested)

About the naming:

"fw" = face to face throw
"bk" = thrower is facing victim's back
"throw" inside TRAM names are sometimes shortened with "thr"
"p" can also be missing
<SelfDamage> parent tag "<SelfDamage />" if unused.
<Damage> parent tag sequence element
<Points> int16 damage taken by character
<Frame> int16 frame of the animation, when damage is dealt
<Attacks> parent tag
<Attack> parent tag Only 2 attack parts per file are allowed. Normally the target gets only one hit. But if the attack frames of both attack parts are overlapping then the target can be hit by both of them.
<Start> int16 First frame where damage can be inflicted to an opponent.
<End> int16 Last frame where damage can be inflicted to an opponent.
<Bones> flag Set here the bones that can inflict damage.
<Flags> flag
Unblockable
Low - blocker needs to crouch
High - blocker needs to stand; if Low and High are set then blocker can block from stand and crouch
HalfDamage - the blocker gets half of the damage
<Knockback> float Target gets knockbacked by this amount.
<HitPoints> int16 damage points
<HitType> flag Animation type for opponent's animation when attack isn't blocked.
<HitLength> int16 Number of frames for how long should blocking char remain in hit anim when he gots hit.
<StunLength> int16 Number in frames for how long should blocking char remain in blocking animation.
<StaggerLength> int16 Number of frames for how long should blocking char perform stagger anim after sucessful block.
<Extents> parent tag Nowadays that data becomes calculated from onisplit automatically.
<Extent> parent tag One tag per frame. In numbers: attack end - attack start + 1. (E.g. start=5; end=6; it makes 2 involved frames.)
<Angle> float In degree.
<Length> float
<MinY> float
<MaxY> float
<AttackRing> parent tag Contains always 36 <Length> tags, no more, no less. Gets calculated by onisplit. (The AttackRing was formerly know as horizontal extents.)
<Length> float Horizontal extents in 10° intervals. They make a zone of danger so the AI knows that the animation is harmful there. (It give them the chance to dogde an attack.)


extents and XML

Ever wondered how comes Artificial Intelligence can recognize incoming attack and block or dodge? Extents ( found out by Geyser and fully uncovered by Neo ) are the key.

There are two types of extents -

  • <Extents>, its packages store this info:
<Angle> at which is this extent radiated from character. 0° is in front of character, 180° is in the back
<Length> of this extent,
<MinY> minimal height of this extent
<MaxY> maximal height of this extent
Length, MinY and MaxY serve for creating invisible area in space which is "dangerous to be in". If AI collides and notices it (refer to notice field in MELE), it will attempt to block or dodge according to its modifiers in given MELE profile. Again, see fields in MELE.
Number of <Extent> is equal to attack frames: <End> minus <Start> plus one (because start frame counts too).
(e.g. TRAMKONCOMkick_low1: <End>30</End> minus <Start>22</Start> plus one = nine <Extent>.)
These extents are pretty impossible to guess, so leave them until Neo comes up with extent computation ( probably from attack bones and bonetrack rotations ).
BUT
Always add at least one package, because its Length, MinY and MaxY will be taken as the longest extent, the most maximal Y and the most minimal Y vales. Those are needed, otherwise character won't react to this attack.
  • <HorizontalExtents>, its packages store this info:
36 fields (exactly 36, no more, no less, otherwise it won't compile back into .oni file), which correspond to areas in 10° intervals around character ( so overall 360°, full horizontal circle around character).
Imagine character. Look at it from above. Make a circle with this character being center of this circle. Now divide this circle with lines after each 10°; and those are horizontal extent lines used by packages ^_^.
Once more 0° is in front of the character, 180° is behind character. Intervals go clockwise. So first package is horizontal extent for 0° line, second package is for horizontal line which is 10° clockwise and so on.
These extents can be guessed up to some degree. Use common sense, look at Your custom attack and tip which lines are probably intersected by attacking limbs of Your move.
Watch out - if attack is frontal ( direct kick forward ), you should worry not only about 0° (directly front), but also about 10°, 20° (a bit to the right) and also about 340°, 350° (a bit to the left).
Next guess the length (you will get used to the sense of distance soon), write it in, test it with some AI which blocks a lot. If you did it right, Your attack will be often blocked.
Don't overdo it with horizontal extent length - too long will cause AIs to react too far from you, does not look pretty.

Have extended fun, --Loser 19:12, 13 July 2010 (UTC)


adding colorful trails

Open the xml formated TRAM and search for the "Particles" tag and insert your code.

First example: TRAMSTRCOMcomb_p_p.xml

colorful_contrail_added_preview.png
       <Particles>
           <Particle>
               <StartFrame>0</StartFrame>
               <EndFrame>12</EndFrame>
               <Bone>LeftFist</Bone>
               <Name>contrail</Name>
           </Particle>
       </Particles>

"contrail" is looked up by the used character class (ONCC) which lunch the actual particle, here it is "h2h_strtrail_e01".


Second example is about two different contrails in one TRAM at same time. The animation is "TRAMSTRCOMpunch_heavy.xml".

different_contrails_in_attack_previ.png
       <Particles>
           <Particle>
               <Start>0</Start>
               <End>54</End>
               <Bone>RightWrist</Bone>
               <Name>contrail</Name>
           </Particle>
           <Particle>
               <Start>0</Start>
               <End>54</End>
               <Bone>LeftWrist</Bone>
               <Name>contrail_2</Name>
           </Particle>
       </Particles>

Note that you need to register the second contrail in the used ONCC as well. Using your own contrail particle is also possible, just insert it's name between the <Type> tags.

           <ONCPParticle>
               <Name>contrail</Name>
               <Type>h2h_strtrail_e01</Type>
               <BodyPart>-1</BodyPart>
           </ONCPParticle>
           <ONCPParticle>
               <Name>contrail_2</Name>
               <Type>h2h_murtrail_e01</Type>
               <BodyPart>-1</BodyPart>
           </ONCPParticle>


fw throws

Situation: you load two chars into Mod Tools and rotate (+/-180°) the throw target char because you want them to stand face to face. When you are done animating, the target animation would need to be reversed again: multiplying the velocities with -1, also the rotation needs a tweak. So far it looks like you need *(-1) for the x rotation and -/+180° (depending on your initial change) for the y rotation.

Excel macro to tweak fw throws

  • put your files into the "input_and_output" folder
  • disable macro security if you don't want to click every time on the macro option button
  • close other worksheets first before you run the macro
  • if you are not afraid of VBA code you can enter the developer environment by hitting [alt]+[F11], e.g. for extending the attack library with more screenshots and settings
    • in that case search for: "LibraryThrows", " LibraryAttack", "Picture", "CBAttackHelp.AddItem"
v4_TN.png


a look on run move complex

Example on Striker's moves, meant as illustration for "what would be needed for new run trams".


Run cancel:


Run - a minimal cycle:


list of (known) unused animations

Those could be reintegrated/recycled/watever ...

from the original game

  • KONOKOconsole_punch what the name says
  • KONOKOlev3_intro looks like she was placing something (bomb?) and then running away
  • KONOKOlev4_undress from an official aborted cutscene
  • KONOKOlev16_bomb planting a bomb
  • KONCOMsuper_kick now used in OTA scripts (mod) as spawn event
  • KONCOMsuper_punch KONCOMpunch_heavy but without attack name shout, HalfDamage, and makes 10 less damage in first attack part
  • COMPISidle_special1 comguy checking environment and his gun
  • STRPISidle_special1 striker showing off his gun, whatever
  • THUGlev1_direct thug probably directing a truck driver

from modders

Following files are available in DAE (and maybe ONI format).

female_stun_TN.jpg

charA and charB performing stun animations