OBD:BINA/OBJC/CMBT

From OniGalore
< OBD:BINA‎ | OBJC
Revision as of 14:47, 17 December 2006 by Geyser (talk | contribs) (a few notes on alarm behavior)
Jump to navigation Jump to search
ONI BINARY DATA
AKVA << Other file types >> CBPI
BINA : Binary data
TMBD << Other BINA >> ONIE
OBJC : Objects
CHAR << Other OBJC >> CONS
CMBT : Combat profile
XML tutorial
Overview @ Oni Stuff
OBD.png




bin_r_cb.gif


Raw hex Value Meaning
54 42 4D 43 TBMC combat
70 01 00 00 368 old file ID
00 00 00 00 0 unknown
13 55 5F C3 -223.332321 x-position of ???
D4 A8 8E 41 17.832436 y-position (height) of ???
C3 05 E9 C2 -116.511253 z-position of ???
00 00 00 00 0.000000 rotation on the x-axis in degrees
00 00 00 00 0.000000 rotation on the y-axis in degrees
00 00 00 00 0.000000 rotation on the z-axis in degrees
Stand_and_Fire space for notes
00 00 00 00 0 combat ID (looked up from CJBOCharacter.BINA)
Below follows the behavior part.
02 00 00 00 2 long range behavior; the following behavior values are possible (values in dec):
 
0 -  none
1 -  stare
2 -  hold and fire
3 -  firing charge
4 -  melee
5 -  Barabbas shoot
6 -  Barabbas advance
7 -  Barabbas melee
8 -  Superninja fireball
9 -  Superninja advance
10 -  Superninja melee
11 -  run for alarm (not used in Oni)
12 -  Mutant Muro melee
13 -  Muro thunderbolt

 
02 00 00 00 2 medium range behavior; values as above
02 00 00 00 2 hand to hand behavior (short range behavior); values as above
02 00 00 00 2 medium retreat behavior; values as above
02 00 00 00 2 long retreat behavior; values as above
Below follows the combat part.
00 00 F0 42 120.000000 maximal combat range; you can make it visible with the script command ai2_showcombatranges = 1
01 00 00 00 1 melee overide; when 1 or higher, AI automatically switches from gunfire to melee on short distance; the following values are possible (values in dec):
 
0 - no
1 - if punched
2 - (canceled)
3 - short range
4 - medium range
5 - always melee
 
00 00 00 00 0 if no gun; ( when 1, AI tries to run if they don't hold weapon) (when 2, unknown) (when 3 and higher, they stand and seems to have no pathfinding logic); the following values are possible (values in dec):
 
0 - melee
1 - retreat
2 - run to alarm
 
00 00 20 42 40.000000 minimal combat range; you can make it visible with the script command ai2_showcombatranges = 1
00 00 48 43 200.000000 pursuit distance
Below follows the non-combatant part.
58 02 00 00 600 panic hurt (time in 1/60 seconds)
84 03 00 00 900 panic gunfire (time in 1/60 seconds)
58 02 00 00 600 panic melee (time in 1/60 seconds)
B0 04 00 00 1200 panic sight (time in 1/60 seconds)



Alarm behavior

These settings affect the behavior of an AI that's running for a console (e.g., script command ai2_doalarm).

Offsets relative to start of CMBT chunk
Offset Type Raw Hex Value Description
0xA0 float 00 00 96 43 300.000000 alarm search distance (defunct?)
0xA4 float 00 00 A0 42 80.000000 alarm enemy ignore distance (see below)
0xA8 float 00 00 00 00 0 alarm enemy attack distance (see below)
0xAC long 1E 00 00 00 30 alarm damage threshold; don't exactly know what it is (see below)
0xB0 long 68 01 00 00 360 alarm fight timer; same as fight timer in ONCC, but this works while AI is in run for alarm mode
Alarm enemy ignore distance
This one specifies an "ignore range". Enemies which are inside this range are NOT ignored. Ignored are those outside this range.
(well, naturally geyser)
When AI doesn't ignore it does NOT mean it attacks. It only knows when there's an enemy nearby and it tries to face that enemy while still on the move. So it runs in a weird way.
(that's probably meant for more efficient auto-blocking or something geyser)
Alarm enemy attack distance
WHY - IS - IT - ZERO??? Seriously. It is really set to zero by default.
(same reason as for the weapon dodging, heh geyser)
This one specifies another range around an AI that's running for a console.
When there is an enemy inside this range and the AI knows about that enemy (i.e., doesn't ignore it due to the "ignore" range above), it will stop running for the console and attack the enemy.
But, at the same time, AI still keeps in mind that it should run for alarm. So when there is no enemy inside this range, AI resumes running to the specified console.
Note
So if you have "ignore range" > "attack range" > 0, you get what I was searching for (for half a year or so):
If an enemy is running for an alarm and you get too close, they'll stop, turn and start fighting with you. When you are far enough (or dead), they'll resume running ^_^'.
You don't know how evil this feature is until you try it itself.
^_-
Alarm damage threshold
it has something to do with run to alarm abortion, but I don't quite get it.
It looks like an amount of damage when AI exits run for alarm state and acts as usual.
But damage taken while fighting someone within the "alarm enemy attack range" doesn't count.
Loser 11:31, 17 December 2006 (CET)

As for the "alarm damage threshold", what would make sense to me is the following:
  • an AI is supposed to run for a console
  • there's an enemy in its way (within the ranges above)
  • it stops to fight that enemy
  • it takes more damage than a certain threshold
  • it says "So long, sucker" and resumes with its alarm job
  • (overriding the "attack" range, and maybe the "ignore" range as well)
So, it's rather the opposite of your idea, Loser:
  • alarm running would have top priority
  • it's the fighting that would be aborted
Doesn't that seem likely? I haven't checked.
geyser 15:47, 17 December 2006 (CET)
Another possibility (perhaps more likely), is suggested by the Big Blue Bow Beta WMDD below.
Namely, the "damage threshold" and the timer may be meant to work together
(note that they're grouped under the "Attack If Knockdown" label)
The idea here is that if there's a physical contact between the runner and an enemy
(the enemy attacking the runner)
then the runner will stop running and start defending itself
(provided the damage it received was above the threshold)
and will resume running after a certain delay (the timer).
Obviously, that "attack if knockdown" logic would be somewhat redundant if the attack range is large enough.
If an AI has already stopped running for a console and is engaging enemies, what use is the "knockdown" check?
So I'm not sure, maybe it's the first possibility after all.
geyser 15:47, 17 December 2006 (CET)
Boy, that is so promising for CTF and Rugby... Thankee, Loser ^^
geyser 15:47, 17 December 2006 (CET)



Blue Box Beta WMDD

bina_combat.gif




Template:OBD TXT



ONI BINARY DATA
AKVA << Other file types >> CBPI
BINA : Binary data
TMBD << Other BINA >> ONIE
OBJC : Objects
CHAR << Other OBJC >> CONS
CMBT : Combat profile
[[OBD:File types/{{{family}}}|{{{family}}} file]]